LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-95-506:en

    SOR-95-506:en — Regulations Respecting Zoning at Sachs Harbour Airport

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 These Regulations may be cited as the Sachs Harbour Airport Zoning Regulations. 2 (1) In these Regulations, airport means the Sachs Harbour Airport, in the vicinity of Sachs Harbour, in the Northwest Territories; (aéroport) airport reference point means the point described in Part I of the schedule; (point de référence de l’aéroport) approach surfaces means the imaginary inclined planes that extend upward and outward from each end of a strip, which planes are more particularly described in Part II of the schedule; (surfaces d’approche) outer surface means an imaginary plane located above and in the immediate vicinity of the airport, which plane is more particularly described in Part III of the schedule; (surfaceextérieure) strip means the rectangular portion of the landing area of the airport, including the runway, that is prepared for the take-off and landing of aircraft in a particular direction, which rectancular portion is more particularly described in Part IV of the schedule; (bande) transitional surfaces means the imaginary inclined planes that extend upward and outward from the lateral limits of a strip and its approach surfaces, which planes are more particularly described in Part V of the schedule. (surfaces de transition) (2) For the purposes of these Regulations, the elevation of the airport reference point is 82.3 m above sea level. 3 These Regulations apply to all land, including public road allowances, that is adjacent to or in the vicinity of the airport, which land is more particularly described in Part VI of the schedule. 4 No person shall erect or construct, on land to which these Regulations apply, a building, structure or object or an addition to an existing building, structure or object, the highest point of which will exceed in elevation at the location of that point (a) the approach surfaces; (b) the outer surface; or (c) the transitional surfaces. SCHEDULE(Sections 2 and 3) PART IDescription of the Airport Reference PointThe airport reference point, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, is a point located on the centre line of runway 084T-264T at a distance of 609.6 m from the threshold of runway 084T. PART IIDescription of the Approach SurfacesThe approach surfaces, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, are planes abutting each end of the strip associated with runway 084T-264T and are described as follows: (a)an inclined plane abutting the end of the strip associated with the approach to runway 084T having a ratio of 1 m measured vertically to 40 m measured horizontally, rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 525 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip; and (b)an inclined plane abutting the end of the strip associated with the approach to runway 264T having a ratio of 1 m measured vertically to 40 m measured horizontally, rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip and distant 3 000 m measured horizontally from the end of the strip; the outer ends of the imaginary horizontal line being 525 m from the projected centre line; said imaginary horizontal line being 75 m above the elevation at the end of the strip. PART IIIDescription of the Outer SurfaceThe outer surface, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, is an imaginary plane established at a constant elevation of 45 m above the elevation of the airport reference point, except that, where that plane is less than 9 m above the surface of the ground, the outer surface is located at 9 m above the surface of the ground. PART IVDescription of the StripThe strip associated with runway 084T-264T, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, is 150 m in width, 75 m being on each side of the centre line of the runway, and 1 339.2 m in length. PART VDescription of the Transitional SurfacesEach transitional surface, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, is an inclined plane rising at a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and projected centre line of the strip, extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface. PART VIDescription of the Land to Which These Regulations ApplyThe outer boundary of the land to which these Regulations apply, shown on Sachs Harbour Airport Zoning Plan No. E.3039, dated October 18, 1994, is a circle with a radius of 4 000 m centred on the airport reference point.

    Related guides, FAQ and contract templates