Beta
SOR-88-600:en
SOR-88-600:en — Regulations Respecting the Safety of Diving Operations Conducted in Connection with the Exploration or Drilling for or the Production, Conservation, Processing or Transportation of Oil or Gas
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI1 These Regulations may be cited as the Canada Oil and Gas Diving Regulations.
2 In these Regulations,
acceptable standard means an applicable standard that is acceptable to the Minister; (norme acceptable)
accident means a fortuitous event that results in the death of or injury to any person involved in a diving operation; (accident)
Act means the Oil and Gas Production and Conservation Act; (Loi)
ADS means an atmospheric diving system capable of withstanding external pressures greater than atmospheric pressure and in which the internal pressure remains at atmospheric pressure and includes a one-person submarine and the one-atmosphere compartment of a diving submersible; (système ADS)
ADS dive means a dive in which an ADS is used; (plongée avec système ADS)
ADS diving operation means a diving operation in which an ADS dive is made; (opérations de plongée avec système ADS)
ADS supervisor means a supervisor of a diving operation involving a pilot; ((directeur de plongée avec système ADS))
ambient pressure means the pressure at any given depth; (pression ambiante)
appropriate breathing mixture means, in relation to a diving operation, a breathing mixture that is suitable, in terms of composition, temperature and pressure, for the diving plant and equipment used in the diving operation, for the work to be undertaken and for the conditions under which and the depth at which the diving operation is to be conducted; (mélange respiratoire approprié)
attendant means a person who has been trained in diving procedures and who is acting under the direction of a supervisor; (adjoint)
bell bounce diving technique means a diving procedure whereby a diving bell or diving submersible is used to transport divers who are under atmospheric pressure or pressures greater than atmospheric pressure to a work site and subsequently to transport the divers under pressures greater than atmospheric pressure from an underwater work site, but does not include saturation diving techniques; (technique de la plongée d’incursion)
bottom time means the period commencing when a person begins pressurization or descent for a dive and terminating when the person commences decompression or ascent; (durée du séjour au fond)
breathing mixture means a mixture of gases used for human respiration and includes pure oxygen and any therapeutic mixture; (mélange respiratoire)
category I dive means a dive to a depth of less than 50 m using surface-oriented diving techniques and a breathing mixture of air, but no other breathing mixture except in cases of decompression, treatment or emergency, and includes a dive in which a diving bell or diving submersible is used for an observation dive, but does not include a lock-out dive; (plongée de catégorie I)
category I diving operation means a diving operation in which a category I dive is made; (opérations de plongée de catégorie I)
category II dive means a dive in which a diving bell or diving submersible is used for a lock-out dive to a depth of less than 50 m using a breathing mixture of air, or to a depth of 50 m or more using a breathing mixture of mixed gas other than air, but does not include a saturation dive; (plongée de catégorie II)
category II diving operation means a diving operation in which a category II dive is made; (opérations de plongée de catégorie II)
category III dive means a saturation dive and any dive other than an ADS dive, a category I dive or a category II dive; (plongée de catégorie III)
category III diving operation means a diving operation in which a category III dive is made; (opérations de plongée de catégorie III)
compression chamber means a pressure vessel that is suitable for human occupancy at internal pressures greater than atmospheric pressure; (caisson de compression ou compartiment de compression)
contingency plan means a contingency plan referred to in paragraph 4(4)(i); (plan d’urgence)
craft means any vessel, vehicle, hovercraft, semi-submersible, submarine or diving-submersible and includes a self-propelled, tethered, towed or bottom-contact apparatus, but does not include an installation; (véhicule)
decompression means the gradual reduction of the pressures of the inert components of a breathing mixture in the body; (décompression)
decompression sickness means a condition caused by the reduction or other changes of pressure on or in the body; (maladie de la décompression)
decompression sickness type I means a decompression sickness that is characterized by one or both of the following symptoms, namely,
(a) pain that is located at or near the joints of the limbs but is not felt in other parts of the body, and
(b) cutaneous manifestations including a rash and cutaneous pruritis (intense itching); (maladie de la décompression de type I)
decompression sickness type II means a decompression sickness that is characterized by one or more of the following symptoms, namely,
(a) neurological manifestations related to the central nervous system,
(b) interference with the respiratory or cardiovascular system,
(c) otologic disorders, and
(d) any symptoms not referred to in the definition “decompression sickness type I”; (maladie de la décompression de type II)
decompression table means a table or set of tables that
(a) shows a schedule of rates for safe descent and ascent and the appropriate breathing mixture to be used by a diver during a dive, and
(b) has been approved in accordance with section 5; (table de décompression)
dive site means the place on a craft or installation from which a diving operation is conducted and from which a diver or pilot involved in the diving operation enters the water; (lieu de plongée)
dive time means the period commencing when a person begins pressurization or descent for a dive and terminating when the person completes decompression or ascent; (durée de la plongée)
diver means a person who meets the requirements of section 53, 55 or 57, who is involved in a diving operation that is part of a diving program and who may be subject to pressures greater than atmospheric pressure; (plongeur)
diving bell means a compression chamber that is intended to be submerged and that is designed to transport a person at atmospheric pressure or divers at pressures greater than atmospheric pressure from the surface to an underwater work site and back and includes the compression chamber of a diving submersible; (tourelle de plongée)
diving contractor means a person who employs a diver for a diving operation or who holds a contract to supply diving services for a diving operation, but does not include a self-employed diver; (entrepreneur en plongée)
diving crew means the persons who are designated by a diving contractor to be involved in a diving operation conducted by the diving contractor and who are under the supervision of a supervisor; (équipe de plongée)
diving doctor means a medical doctor who is licensed and registered to practise in a province, who has completed a diving medical course acceptable to the Minister and who has been accepted in writing by the Minister to certify divers for the purposes of paragraph 53(b), but who has not been accepted by the Minister to provide medical assistance under pressures greater than atmospheric pressure; (médecin de plongée)
diving operation means any work or activity that is associated with a dive and that takes place during the total dive time and includes
(a) any work or activity involving a diver or pilot,
(b) the activities of a person assisting a diver or pilot involved in the dive, and
(c) any use of an ADS in the dive; (opérations de plongée)
diving plant and equipment means the plant and equipment that are used in, or in connection with, a diving operation and includes the plant and equipment that are essential to a diver or pilot; (matériel de plongée)
diving program means any work or activity related to the exploration or drilling for or the production, conservation, processing or transportation of oil or gas that involves a diving operation; (programme de plongée ou programme)
diving safety specialist means a person who meets the criteria set out in subsection 26(1); (spécialiste de la sécurité en plongée)
diving station means the place from which a diving operation is controlled; (poste de commande de plongée)
diving submersible means a self-propelled submarine that has at least
(a) one one-atmosphere compartment from which the diving submersible is piloted and from which a dive can be supervised, and
(b) one compression chamber from which a dive can be conducted; (sous-marin crache-plongeurs)
diving supervisor means a supervisor of a diving operation involving a diver; (directeur de plongée)
dressed-in means fully equipped to dive and ready to enter the water, with the diver’s personal diving equipment tested and at hand, whether or not helmet, face plate or face mask is in place; (équipé)
emergency means an exceptional situation resulting from an accident or incident; (urgence)
environmental conditions means conditions that may affect a diving operation and includes
(a) weather and sea conditions,
(b) speed of currents and tides,
(c) shipping activities,
(d) air and water temperatures,
(e) icing conditions, and
(f) debris on the sea surface or sea bed; (conditions ambiantes)
hyperbaric first-aid technician means a person who has successfully completed an advanced hyperbaric first-aid course acceptable to the Minister; (secouriste hyperbare)
incident means a fortuitous event that compromises or is likely to compromise the safety of, or endangers or is likely to endanger the health, well-being or life of, a person involved in a diving operation; (incident)
installation means any fixed offshore structure used in connection with the exploration or drilling for or the production, conservation, processing or transportation of oil or gas; (installation)
lifeline means a safety line attached to a diver that is suitable for recovering and lifting the diver and the diver’s personal diving equipment from the water; (ligne de vie)
life-support system means a system comprising the breathing mixture supply systems, decompression and recompression equipment, environmental control systems and equipment and supplies that may be required to provide safe accommodation for a person in the water, in a compression chamber, in a diving bell, in a diving submersible or in an ADS under all pressures and conditions that a person may be exposed to during a diving operation; (système de survie)
life-support technician means a person who has successfully completed a life-support technician’s course acceptable to the Minister and who has satisfied the Minister that the person has attained a level of competence in all aspects of all types of diving techniques, including emergency procedures, hyperbaric first-aid and operation of life-support systems; (technicien des systèmes de survie)
lock-out dive means a dive from a diving bell or a diving submersible; (plongée à partir d’un sas)
maximum working load means the total weight of a load likely to be handled under normal operating conditions in a diving operation, weighed out of water and includes the weight of the umbilical; (charge de service maximale)
maximum working pressure means the maximum pressure to which a compression chamber can safely be exposed under normal operating conditions in a diving operation, and, where a compression chamber is interconnected with one or more other compression chambers, means, in respect of each of those interconnected chambers, the maximum pressure to which the interconnected chamber with the lowest maximum working pressure can safely be exposed under normal operating conditions; (pression de service maximale)
medical lock means a lock through which objects may be passed into or out of a compression chamber while a person inside the compression chamber remains under pressure; (sas à médicaments)
Minister means,
(a) in relation to any area in respect of which the Minister of Indian Affairs and Northern Development has administrative responsibility for the natural resources therein, the Minister of Indian Affairs and Northern Development, and
(b) in relation to any area in respect of which the Minister of Energy, Mines and Resources has administrative responsibility for the natural resources therein, the Minister of Energy, Mines and Resources; (ministre)
operator means a person who has been authorized, pursuant to paragraph 3.2(1)(b) of the Act, to carry on a work or activity referred to in section 3.1 of the Act that is a diving program or that includes a diving program; (exploitant)
personal diving equipment means the diving equipment carried by a diver on the diver’s person during a dive and includes a diving suit, breathing apparatus, bale-out gas bottle and communications equipment; (équipement personnel de plongée)
pilot means a person who controls the movement of an ADS from within the ADS and who performs from within the ADS any other tasks necessary for the operation of the ADS; (pilote)
pressure vessel means a closed container capable of withstanding internal or external pressures, or both, greater than one atmosphere; (appareil sous pression)
procedures manual means the procedures manual referred to in paragraph 4(4)(a); (manuel des méthodes)
recognized body means an organization, a classification society, a certifying agency, a group of persons or an individual that is acceptable to the Minister as having the expertise and experience to set standards for, or to inspect and certify, diving plant and equipment or parts thereof; (autorité reconnue)
saturation dive means a dive in which saturation diving techniques are used; (plongée à saturation)
saturation diving technique means a diving procedure that essentially equilibrates the total pressure of inert gases in the body of a diver with the ambient pressure and allows extended periods of bottom time without additional decompression time required; (technique de la plongée à saturation)
SCUBA means a self-contained open-circuit underwater breathing apparatus; (appareil de plongée autonome)
skip means a stage, cage, basket or wet bell in which a diver may be lowered to or raised from an underwater work site; (skip)
specialized diving doctor means a diving doctor who has completed an advanced diving medical course acceptable to the Minister and who has been accepted in writing by the Minister to provide medical assistance under pressures greater than atmospheric pressure; (médecin de plongée spécialisé)
stand-by diver means a diver who is dressed-in and trained to operate at the same depths and in the same circumstances as the diver for whom the stand-by diver is standing by, who is at the same dive site as the other diver and who is available without delay to assist that other diver; (plongeur de secours)
supervisor means a person appointed in writing by a diving contractor, pursuant to subsection 9(3), as a diving supervisor or an ADS supervisor to supervise a diving operation; (directeur)
surface compression chamber means a compression chamber that is not intended to be submerged; (caisson de compression de surface)
surface-oriented diving technique means a diving procedure in which the use of a diving bell or diving submersible is not required; (technique de la plongée avec soutien en surface)
total dive time means the period commencing when a person begins to prepare for a dive and terminating when the person leaves the water, is not subject to pressures greater than atmospheric pressure and, in accordance with the relevant schedule in the appropriate decompression table, has normal inert gas pressure in the person’s body; (durée totale de la plongée)
umbilical means a composite hose or cable or number of separate hoses or cables capable of supplying a breathing mixture, power, heat, communications and other services, as required for a diving operation. (ombilical)
3 These Regulations apply to any diving operation carried on in connection with the exploration or drilling for or the production, conservation, processing or transportation of oil or gas in areas to which the Act applies.
4 (1) A person may apply for an authorization under paragraph 3.2(1)(b) of the Act in respect of a proposed diving program by forwarding to the Minister an application, completed in triplicate, in the form prescribed by the Minister.
(2) An authorization under paragraph 3.2(1)(b) of the Act in respect of a proposed diving program is, in addition to any other requirements of these Regulations, subject to the requirements that the operator and the diving contractor, if any, of the diving program shall
(a) maintain the level of performance of the diving crew, diving plant and equipment and any craft or installation used in the diving program at or above the level of performance indicated in the application referred to in subsection (1) and accepted by the Minister, for the authorization for the diving program, as the level of performance at which the diving program will be carried on;
(b) where the operator or the diving contractor, as the case may be, proposes to replace a supervisor involved in the diving program or appoint an additional supervisor, provide the Minister with evidence that any replacement or additional supervisor who will be involved in the diving program meets the criteria set out in section 27, 29, 31 or 33 to supervise the category of dive the supervisor will be supervising; and
(c) where, in any area in which the diving program is being carried on, the environmental conditions, during any period, become more severe than the environmental conditions indicated in the application as being the most severe environmental conditions under which the diving program would be carried on, cease to carry on the diving program in that area during that period.
(3) No authorization may be given under paragraph 3.2(1)(b) of the Act in respect of a proposed diving program unless the applicant provides the Minister with evidence
(a) that a diving safety specialist was consulted on all safety aspects of the diving program;
(b) that a diving safety specialist will be available on a 24 hour a day basis to advise any person involved in the diving program, including any person making decisions affecting the safety of divers involved in the diving program, on all safety aspects of the diving program;
(c) that any supervisor who will be involved in the diving program meets the criteria set out in section 27, 29, 31 or 33 to supervise the category of dive the supervisor will be supervising;
(d) that the services of a specialized diving doctor, who is familiar with the diving procedures to be used in the diving operation that will form part of the diving program and who is within a travelling distance of the diving operation that is acceptable to the Minister, will be available on a 24 hour a day basis to any person involved in the diving program;
(e) of any certificates issued by the manufacturer or a recognized body in respect of the diving plant and equipment to be used in the diving program; and
(f) where a diving program is to be conducted by a diving contractor who is not also the operator of the diving program, that the diving contractor is able to meet any liability for loss, damage, costs or expenses that may be incurred by the diving contractor as a result of the diving program.
(4) No authorization may be given under paragraph 3.2(1)(b) of the Act in respect of a proposed diving program unless approval has been granted by the Minister for the following:
(a) the procedures manual that contains the procedures to be followed in the diving program, including the procedures referred to in Schedule I;
(b) the diving plant and equipment to be used in the diving program, including the two-compartment compression chamber referred to in subparagraph 9(5)(h)(ii) and paragraph 47(3)(a), and any equivalent first-aid supplies referred to in paragraph 12(2)(b);
(c) schematic drawings showing the general arrangement of any diving plant and equipment to be used in the diving program and their location on board the craft or installation on which or from which they will be used in the diving program;
(d) where a craft is to be used in the diving program and is to be used in a manner referred to in subparagraph 12(2)(p)(iv), to be approved in accordance with section 5, the manner in which the craft is to be used;
(e) any use in the diving program of a craft in the dynamically positioned mode and the dynamically positioned diving operational capacity graph in respect of the craft;
(f) where a diving submersible is to be used in the diving program and is to be secured in a manner referred to in subparagraph 18(b)(iii), to be approved in accordance with section 5, the manner in which the diving submersible is to be secured;
(g) any experimental equipment or technique to be used in the program;
(h) any evacuation, rescue and treatment facilities and devices provided for the program pursuant to section 23; and
(i) the contingency plan to be followed in the diving program including the emergency procedures referred to in Schedule II and the particulars of any additional evacuation, rescue and treatment facilities and devices to be provided for use in the diving program.
5 (1) The Minister is authorized to grant, in accordance with subsection (2), any approval prescribed in these Regulations and to make that approval subject to, in addition to the requirements prescribed in these Regulations, such requirements, terms or conditions as the Minister determines.
(2) The Minister shall provide a person with evidence of any approval granted to the person pursuant to subsection (1).
(3) The Minister is authorized to suspend or revoke an approval referred to in subsection (1) for failure to comply with, or for contravention of, the terms and conditions subject to which the approval was granted.
(4) Where the Minister, pursuant to subsection (3), suspends or revokes an approval granted to a person, the Minister shall give the person an opportunity to show cause why the approval should not be suspended or revoked.
6 (1) The operator of a diving program shall
(a) arrange for the services of a diving safety specialist who will be available on a 24 hour a day basis to advise any person involved in the diving program, including any person making decisions affecting the safety of divers involved in the diving program, on all safety aspects of the diving program;
(b) make available a suitable place from which any diving operation that is part of the diving program may be conducted;
(c) to the extent practicable, give advance notice of any operation that is part of the diving program to the person in charge of any craft or installation in the vicinity of the operation;
(d) make available adequate forecasts of environmental conditions to the supervisor on duty at a diving operation that is part of the diving program
(i) before the diving operation begins, and
(ii) during the diving operation, at intervals of not more than 24 hours and at any time where the supervisor requests those forecasts;
(e) inform the supervisor on duty at a diving operation that is part of the diving program of any matter within the operator’s control that may affect the safety of the diving operation;
(f) provide an adequate and effective system of communication between the supervisor who is on duty and any person, other than the divers and pilots, involved in, or in a position to assist in, a diving operation that is part of the diving program, including a winch or crane operator and a person on the bridge, on the rig floor or in the main control room of a craft or installation used in the diving operation;
(g) while a diving operation that is part of the diving program is in progress, prominently display notices to that effect
(i) in the case of any craft or installation used in the diving operation, on the bridge and in the engine room, and
(ii) in the case of any diving plant and equipment used in the diving operation, on any controls the operation of which might endanger a diver or pilot and on any controls for impressed current cathodic protection;
(h) display in the control room of a craft that will be operated in the dynamically positioned mode in a diving operation that is part of the diving program a copy of the dynamically positioned diving operational capacity graph in respect of the craft;
(i) in the event that a member of a diving crew involved in the diving program meets with an accident, notify the Minister of the accident by the most rapid and practicable means and submit to the Minister a report of the accident in the form set out in Schedule III;
(j) in the event of a serious illness affecting a member of a diving crew involved in the diving program or an incident in connection with the diving program, notify the Minister of the illness or incident as soon as possible, investigate the cause of the illness or incident and submit to the Minister a report of that illness or incident, including, in the case of an incident, a report in the form set out in Schedule III;
(k) submit to the Minister a monthly report of all injuries to any member of a diving crew involved in a diving operation that is part of the diving program; and
(l) during the course of any diving operation that is part of the diving program, display a copy of the authorization under paragraph 3.2(1)(b) of the Act for that diving program and evidence of any approval granted in relation to that authorization pursuant to section 5 in a prominent place at the diving station for the diving operation.
(2) The operator of a diving program shall not
(a) conduct any diving operation that is part of the diving program in the vicinity of any other activity that might pose a danger to any person involved in the diving operation;
(b) use, in a diving operation, any craft that has insufficient power or stability for the safe conduct of the diving operation; and
(c) prevent any diving contractor involved in the diving program from complying with any of the provisions of these Regulations.
7 (1) Subject to subsection (2), the operator of a diving program shall
(a) forthwith repair, replace or alter or arrange for the repair, replacement or alteration of any diving plant and equipment that is being used in the diving program and that is defective or becomes inadequate or unsafe;
(b) alter any procedure set out in the procedures manual for the diving program that becomes unsafe, inadequate or deficient; and
(c) where necessary, initiate a new procedure in respect of the diving program.
(2) Where, pursuant to subsection (1), the operator of a diving program
(a) repairs, replaces or alters or arranges for the repair, replacement or alteration of any diving plant and equipment referred to in paragraph (1)(a), other than a routine repair, replacement or alteration carried out by a competent person,
(b) alters a procedure set out in the procedures manual for the diving program, or
(c) initiates a new procedure in respect of the diving program,
the operator shall, prior to any activity referred to in paragraphs (a) to (c), obtain such approval as the Minister determines pursuant to paragraph 3.2(1)(b) of the Act.
8 (1) An operator may apply for authorization pursuant to subsection 12.2(1) of the Act to use equipment, methods, measures or standards that do not comply with these Regulations.
(2) An application referred to in subsection (1) shall set out the manner in which the equipment, methods, measures or standards that are the subject of the application provide a level of safety and pollution prevention at least equivalent to that which would be provided by compliance with these Regulations.
9 (1) Subject to subsection (2), no diving contractor shall conduct a diving operation unless the diving contractor has arranged for the services of a diving safety specialist, other than the diving safety specialist available pursuant to paragraph 4(3)(b), who will be available on a 24 hour a day basis to advise any person involved in the diving operation, including any person making decisions affecting the safety of divers involved in the diving operation, on all safety aspects of the diving operation.
(2) Where the operator referred to in subsection 6(1) and the diving contractor referred to in subsection (1) are the same person, the diving safety specialist required pursuant to subsection (1) may be the same person as the diving safety specialist required pursuant to paragraph 4(3)(b).
(3) No diving contractor shall conduct a diving operation that includes
(a) a category I dive unless the diving contractor has appointed in writing a person who meets the criteria set out in section 27, 29 or 31 to supervise the diving operation and such a supervisor is present at all times during the diving operation;
(b) a category II dive unless the diving contractor has appointed in writing a person who meets the criteria set out in section 29 or 31 to supervise the diving operation and such a supervisor is present at all times during the diving operation;
(c) a category III dive unless the diving contractor has appointed in writing a person who meets the criteria set out in section 31 to supervise the diving operation and such a supervisor is present at all times during the diving operation; and
(d) the use of an ADS unless the diving contractor has appointed in writing a person who meets the criteria set out in section 33 to supervise the diving operation and such a supervisor is present at all times during the diving operation.
(4) No diving contractor shall, in a diving operation conducted by the diving contractor, employ a person
(a) to make a category I dive unless the person meets the criteria set out in section 53, 55 or 57;
(b) to make a category II dive unless the person meets the criteria set out in section 55 or 57;
(c) to make a category III dive unless the person meets the criteria set out in section 57; or
(d) to pilot an ADS unless the person meets the criteria set out in section 64.
(5) A diving contractor who conducts a diving operation that is part of a diving program shall
(a) ensure that every diving supervisor employed by the diving contractor in the diving program on a full-time basis has the opportunity to supervise each year a minimum of 12 dives appropriate to the category of dive for which the supervisor is certified;
(b) ensure that every ADS supervisor employed by the diving contractor in the diving program on a full-time basis has the opportunity to supervise each year a minimum of six ADS dives;
(c) ensure that every diver employed by the diving contractor in the diving program on a full-time basis has the opportunity to make each year a minimum of 24 dives, totalling a minimum of 20 hours of bottom time, appropriate to the category of dive for which the diver is certified;
(d) ensure that every pilot employed by the diving contractor in the diving program on a full-time basis has the opportunity to make each year at least four ADS dives totalling a minimum of 16 hours of bottom time;
(e) ensure that, except in the case of an emergency, each member of a diving crew involved in the diving operation, in every 24 hour period,
(i) has a rest period of not less than eight consecutive hours, and
(ii) is required to work not more than 12 hours;
(f) follow the procedures set out in the procedures manual for the diving program and any altered or newly initiated procedures referred to in section 7 for the diving program;
(g) maintain, at the craft or installation from which the diving operation is conducted, two copies of these Regulations and a copy of the applicable procedures manual and make them available to any person involved or to be involved in the diving operation and, on request, to the Minister or a conservation engineer;
(h) provide or arrange for the provision of any diving plant and equipment necessary for the safe conduct of the diving operation, including
(i) adequate firefighting equipment, and
(ii) a two-compartment compression chamber that
(A) has been approved for the diving program, in accordance with section 5, for use at a pressure that is not less than six atmospheres absolute and, where the maximum working pressure that may be encountered during any dive that is part of the diving operation is greater than six atmospheres absolute, for use at the maximum pressure plus one atmosphere,
(B) is suitable for the diving operation, and
(C) is located in a readily accessible place on board the craft or installation from which the diving operation is conducted, except in the case of a diving operation that is conducted at a depth of 10 m or less, and, where the supervisor of the diving operation approves, may be located within one hour’s travelling time from the dive site;
(i) use only diving plant and equipment that is of sound construction, adequate strength, free from patent defects and in good working order;
(j) provide for the protection of the diving plant and equipment used in the diving operation from malfunction in the environmental conditions under which the diving plant and equipment are to be used, including conditions of low or high temperatures;
(k) permit only such repair, replacement and alteration of diving plant and equipment used in the diving operation as has been approved pursuant to subsection 7(2) and ensure that routine repair, replacement or alteration is carried out by a competent person;
(l) provide adequate illumination of the dive site and the underwater work site of the diving operation
(i) during any period of darkness or low visibility, and
(ii) where the supervisor of the diving operation requests the illumination and where the nature of the diving operation so permits;
(m) provide a diving operations logbook that is permanently bound and has numbered pages;
(n) retain any diving operations logbook referred to in paragraph (m) that is delivered to the diving contractor by a supervisor pursuant to subsection 50(5), and any records or copies delivered to the diving contractor by a supervisor pursuant to subsection 52(3), for a period of not less than two years after the day of the last entry made in it; and
(o) produce, on request, any logbooks, records or copies referred to in paragraph (n) for inspection by the Minister or a conservation engineer.
(6) Where continuance of a diving operation would compromise or is likely to compromise the safety or would endanger or is likely to endanger the health, well-being or life of, any person involved in the diving operation, the diving contractor who conducts the diving operation shall forthwith interrupt or discontinue the diving operation.
10 (1) A diving contractor who conducts a diving operation shall not permit any person involved in the diving operation to be exposed to a pressure greater than atmospheric pressure in a compression chamber used in connection with the diving operation unless
(a) not more than 12 months prior to the day of the exposure, a diving doctor has certified that the person is fit to be exposed to the pressure; and
(b) copies of the certificate referred to in paragraph (a) are in the possession of the diving contractor and the person.
(2) Subsection (1) does not apply
(a) to any person who requires therapeutic compression; or
(b) in the case of an emergency, to a person who can provide medical treatment, where no person certified pursuant to paragraph (1)(a) is available.
11 (1) A diving contractor who conducts a diving operation shall use or permit to be used in the diving operation
(a) only diving plant and equipment that has been examined and, where appropriate, subjected to a pressure leak test using an appropriate breathing mixture to a pressure that is not less than six atmospheres absolute and, where the maximum working pressure that may be encountered during any dive that is part of the diving operation is greater than six atmospheres absolute, to the maximum pressure plus one atmosphere
(i) not more than three months prior to the day on which it is to be used,
(ii) on mobilization and assembly, and
(iii) following any repair, replacement or alteration of the diving plant and equipment that might affect its safety;
(b) in the case of a compression chamber, only a compression chamber that
(i) not more than two years prior to the day on which it is to be used, has been subjected to a pressure leak test to the maximum working pressure of the chamber using an appropriate breathing mixture, and
(ii) not more than five years prior to the day on which it is to be used, has been subjected to an internal pressure test of at least 1.25 times the maximum working pressure of the chamber;
(c) in the case of a pressure vessel for compressed gases that is not intended to be immersed in water, including compressed air cylinders, only a pressure vessel that has been subjected to
(i) a thorough examination and internal pressure test not more than five years prior to the day on which it is to be used, and
(ii) an internal inspection for corrosion not more than two years prior to the day on which it is to be used, or such longer period as is determined by the Minister pursuant to paragraph 3.2 (1)(b) of the Act;
(d) in the case of a pressure vessel for compressed gases that is intended to be immersed in water, only a pressure vessel that has been subjected to
(i) a thorough examination and internal pressure test not more than two years prior to the day on which it is to be used, and
(ii) an internal inspection for corrosion not more than one year prior to the day on which it is to be used, or such longer period as is determined by the Minister pursuant to paragraph 3.2(1)(b) of the Act; and
(e) in the case of lifting equipment for a launch and recovery system, only lifting equipment that has been tested
(i) on first installation and, thereafter, before operational use of the lifting equipment following a repair, replacement or alteration, other than a routine repair, replacement or alteration carried out by a competent person, by means of a functional test, and
(ii) every six months following a functional test carried out pursuant to subparagraph (i), by means of a test that tests the capability of the lifting equipment to operate safely under its maximum working load.
(2) A diving contractor who conducts a diving operation shall ensure that
(a) each examination and test required to be carried out for the purposes of subsection (1) is carried out by or under the supervision of a recognized body and in accordance with an acceptable standard; and
(b) where a pneumatic or hydrostatic pressure test is carried out for the purposes of subsection (1), adequate precautions are taken to ensure the safety of the personnel involved, the diving plant and equipment and the craft or installation used in the test.
(3) A diving contractor who conducts a diving operation shall keep a register in which are inserted or to which are attached certificates
(a) containing details and results of examinations and tests carried out pursuant to subsection (1), and
(b) signed by the person by whom or under whose supervision the examinations or tests were carried out,
and shall retain the register
(c) in the case of a register that contains certificates relating to pressure vessels, for at least five years after the day of the last entry in it; and
(d) in any other case, for at least two years after the day of the last entry in it.
(4) A diving contractor who conducts a diving operation shall not use or permit to be used in the diving operation any diving plant and equipment that is unsafe as determined by an examination or test carried out pursuant to subsection (1).
12 (1) A diving contractor who conducts a diving operation shall not use or permit to be used any diving plant and equipment in the diving operation unless the design thereof is such that
(a) it enables divers and pilots to safely enter and leave the water;
(b) divers can be safely compressed or decompressed in accordance with the relevant schedule in the appropriate decompression table;
(c) where a hot-water system is used as the means of heating a diver, a hot-water reservoir is, where practicable, included in the system; and
(d) the body temperature of a diver or pilot can be maintained within safe limits during the diving operation.
(2) A diving contractor who conducts a diving operation shall ensure that
(a) prior to the time a diver involved in the diving operation enters the water, the diver is provided with
(i) a diving harness complete with pelvic support and lifting ring,
(ii) a depth indicator that is, where practicable, a type that can be monitored from the surface, and
(iii) during any period of darkness or low visibility or where requested by the supervisor of the diving operation, a lamp or other suitable device that indicates the diver’s location;
(b) the first-aid supplies listed in Part I of Schedule IV, or equivalent first-aid supplies approved in accordance with section 5 for the diving program of which the diving operation is a part, are
(i) packed in such a manner that they fit through the medical lock of any surface compression chamber used in the diving operation, and
(ii) kept on the craft or installation from which the diving operation is conducted, except where it is impracticable in a category I diving operation or an ADS diving operation and where the supervisor of the diving operation approves, in which case the supplies may be kept readily available within a travelling distance of the diving operation that is acceptable to the supervisor
and, where a diving bell or diving submersible is used in the diving operation, the first-aid supplies listed in Part II of Schedule IV, or equivalent first-aid supplies approved in accordance with section 5 for the diving program of which the diving operation is a part, are kept in the diving bell or the compression chamber of the diving submersible;
(c) any airtight container used to pack any of the first-aid supplies referred to in paragraph (b) for use in the diving operation has a suitable means of equalizing pressure;
(d) where the safe use of the diving plant and equipment depends on the pressure or depth at which it is used, the diving plant and equipment is clearly marked with the maximum working pressure or the maximum depth at which it may be used;
(e) any lifeline used in the diving operation has a manufacturer’s breaking strength rating in accordance with an acceptable standard;
(f) any gas bottle used in the diving operation is clearly marked with the name and chemical formula of its contents;
(g) any winch used in the diving operation to raise or lower a skip, diving bell, diving submersible or ADS
(i) is so constructed that
(A) a brake or mechanical locking device is applied when the control lever, handle or switch is not held in the operating position,
(B) the brakes have the capability of stopping and holding 100 per cent of the maximum working load with the outermost layer of wire on the drum,
(C) the brakes engage automatically on loss of power, and
(D) the lowering and raising of loads is controlled by power drives independent of the brake mechanism,
(ii) is not fitted with a pawl and ratchet gear on which the pawl has to be disengaged before commencing a lowering or raising operation,
(iii) is so designed as to prevent the possibility of freeze-up when in operation,
(iv) is equipped with a lifting wire capable of withstanding a functional test in accordance with an acceptable standard, and
(v) complies with an acceptable standard of construction for winches;
(h) any prime mover used in the diving operation to operate lifting equipment for a skip, diving bell, diving submersible or ADS is not used for any other purpose;
(i) except where alternative lifting equipment is provided for any skip, diving bell, diving submersible or ADS used in the diving operation, an auxiliary prime mover capable of lifting the maximum working load is provided;
(j) where, during the diving operation, a skip, diving bell, diving submersible or ADS is being held in position by a hydraulically operated winch that is not equipped with a mechanical locking device, the hydraulic pumps are kept running during the diving operation;
(k) where the Minister so determines, pursuant to paragraph 3.2(1)(b) of the Act, any craft or installation used in the diving operation is equipped with
(i) a receiver system that is compatible with the relocation transponder system fitted to any diving bell, diving submersible or ADS that is used in the diving operation, and
(ii) a hand-held receiver that is suitable for use by a diver or pilot in achieving a final location and that is compatible with the receiver system on the craft or installation and the relocation transponder system on the diving bell, diving submersible or ADS;
(l) any skip, diving submersible or ADS used in the diving operation is equipped with
(i) a secondary lifting eye or similar device that is of at least the same strength as the primary lifting eye, and
(ii) where practicable, an additional cable in the form of a suitable tag rope so designed that, in the event that the primary lifting cable breaks during a water-air interface transport, the tag rope will not permit the skip, diving submersible or ADS to descend to a depth greater than 25 m,
and has readily available, for use in an emergency, a secondary lifting cable that has at least the same strength as the primary lifting cable and that is compatible with the secondary lifting eye or similar device;
(m) any skip used in the diving operation to transport divers through the water-air interface is
(i) large enough to carry, in uncramped conditions, at least two divers with their personal diving equipment,
(ii) secured against tipping or spinning,
(iii) not encumbered by any equipment that may interfere with an occupant’s foothold or handhold,
(iv) equipped with handholds arranged in such a manner that crushed-hand injuries during launch or recovery are avoided,
(v) so constructed or equipped that its occupants are secure against falling out of the skip, and
(vi) in the case of a skip that is a wet bell, equipped with an additional band mask or full face mask;
(n) any diving submersible or ADS used in the diving operation is equipped with
(i) a stroboscopic light that is automatically activated in the water and a pinger that operates at a frequency of 37.5 kHz, and
(ii) a relocation transponder system that operates at a frequency of 37.5 kHz, where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act;
(o) a secondary source of power that will operate in the event of a failure of the primary source of power is provided for the diving operation, can be brought on-line rapidly and has sufficient capacity to
(i) operate the handling system for any skip, diving bell, diving submersible or ADS used in the diving operation,
(ii) heat any compression chamber used in the diving operation and heat, for the period required to complete the diving operation, any diver who is involved in the diving operation and who is in the water,
(iii) sustain the life-support system of any compression chamber used in the diving operation and of any diver who makes a dive that is part of the diving operation,
(iv) illuminate the interior of any compression chamber used in the diving operation, and
(v) operate any communication system and monitoring system used in the diving operation; and
(p) where any craft is used in the diving operation, there is provided a safe means of ensuring that the craft is, during the diving operation,
(i) at anchor,
(ii) made fast to the shore or to an installation,
(iii) maintained in position using its propulsion system in accordance with section 25, or
(iv) used in such a manner as the Minister determines pursuant to paragraph 3.2(1)(b) of the Act or as approved in accordance with section 5 for the diving program of which the diving operation is a part.
13 (1) Subject to subsection (2), no diving contractor shall conduct a diving operation unless there is available for use in the diving operation
(a) for communications between the supervisor of the diving operation and any diver or pilot involved in the diving operation
(i) a primary communication system that has
(A) sound reproduction adequate to enable breathing to be clearly heard and oral communications to be clearly heard and understandable, and
(B) a recording device that continuously records all oral communications while a dive is in progress, and
(ii) a secondary communication system that allows the supervisor and the divers or pilots to communicate orally in the event of a failure of the primary communication system; and
(b) for communications between the supervisor and any person involved in, or in a position to assist in, the diving operation, other than the divers and pilots referred to in paragraph (a), a communication system that meets the requirements of paragraph 6(1)(f).
(2) Subsection (1) does not apply to a diving operation where SCUBA is used and where it is impracticable to use the communication systems referred to in that subsection, in which case no diving contractor shall conduct such a diving operation unless there is available for use in the diving operation an alternative method of communication that is adequate for the type of diving operation and that the supervisor of the diving operation considers suitable for the diving operation.
14 No diving contractor who conducts a diving operation shall use or permit to be used in the diving operation a pressure vessel intended for human occupancy unless the pressure vessel is equipped with
(a) a breathing mask for each occupant of the pressure vessel;
(b) a means of maintaining the oxygen, carbon dioxide, temperature and humidity in the pressure vessel at levels and pressures that are safe for the occupants; and
(c) for use in an emergency, a back-up capability to maintain the levels and pressures referred to in paragraph (b) for a minimum of, in the case of a diving bell or the compression chamber of a diving submersible, 24 hours and, in any other case, 48 hours.
15 No diving contractor who conducts a diving operation shall use or permit to be used a compression chamber in the diving operation unless the compression chamber
(a) meets the requirements of section 14;
(b) is designed and constructed in accordance with an acceptable standard;
(c) provides a suitable environment for its occupants, including amenities appropriate to the type, depth and duration of the diving operation;
(d) is equipped with doors that act as pressure seals and that can be opened from both the inside and the outside;
(e) is designed to minimize the risk of fire and
(i) is constructed of only non-combustible or fire-resistant materials, and
(ii) is equipped with suitable firefighting capabilities;
(f) is fitted with adequate equipment, including facilities for
(i) supplying to and maintaining for its occupants an appropriate breathing mixture,
(ii) lighting and heating the compression chamber, and
(iii) removing carbon dioxide;
(g) is equipped with valves, gauges and other fittings necessary to indicate and control the internal pressures of each compartment from outside the compression chamber;
(h) is fitted with piping that has at least one external shut-off valve, where practicable, immediately outside the point at which the piping enters the compression chamber and one internal shut-off valve immediately inside that point;
(i) is fitted with hull integrity valves that clearly indicate whether the valves are in the open or closed position and that are clearly labelled by name and number;
(j) other than a diving bell and the compression chamber of a diving submersible, is equipped with a built-in breathing system that permits outside dumping of exhaled gas;
(k) where appropriate, is equipped with an emergency shut-off valve that automatically shuts off the flow of gas from the compression chamber if the velocity or volume of gas exceeds the preset limit;
(l) is equipped with relief valves resistant to marine corrosion;
(m) has all of its internal electrical wiring insulated and in conduit, except for the wiring for low-power devices such as telephones;
(n) is cleaned and disinfected using only products that are
(i) recommended by the manufacturer for that type of use,
(ii) well proven for that purpose,
(iii) non-toxic at any pressure,
(iv) non-corrosive, and
(v) safe to use;
(o) where used in a category II dive or a category III dive or, where practicable, in a category I dive, is provided with a coupling arrangement that is suitable for the safe transfer of persons under pressure and that is designed to prevent accidental release;
(p) is provided with a clamping mechanism that
(i) is suitable for coupling a diving bell with the surface compression chamber,
(ii) clearly indicates when the clamping mechanism is fully engaged, and
(iii) cannot be disengaged while pressurized;
(q) is supplied with breathing mixture through a gas control panel that
(i) has distinct indicators of the function of each valve and gauge, and
(ii) is designed so as to minimize the possibility of supplying an incorrect breathing mixture;
(r) if manufactured after December 31, 1990,
(i) is fitted with a device to record continuously and to preserve at least the last recorded four hours of data respecting temperature, oxygen levels, depth, time and oral communications and, where practicable, carbon dioxide and humidity levels, and
(ii) where practicable, is provided with a means to permit video monitoring of its occupants; and
(s) if manufactured on or before December 31, 1990, meets the requirements set out in paragraph (r) where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act.
16 No diving contractor who conducts a diving operation shall use or permit to be used a surface compression chamber in the diving operation unless the surface compression chamber
(a) meets the requirements of sections 14 and 15;
(b) contains at least two independently sealable compartments;
(c) contains sufficient space in at least one of its compartments to enable each occupant to lie down comfortably in the compartment;
(d) where a person will be in the surface compression chamber for a period of eight consecutive hours or less, has an internal vertical diameter of at least 1.5 m;
(e) where a person will be in the surface compression chamber for a period of more than eight consecutive hours, has an internal vertical diameter of at least 2 m;
(f) is equipped with a medical lock;
(g) where the surface compression chamber will be used for a period of more than 12 consecutive hours, has adequate sanitation facilities;
(h) if manufactured after December 31, 1990, is fitted with a through-hull connector suitable for medical monitoring of its occupants; and
(i) if manufactured on or before December 31, 1990, meets the requirements of paragraph (h) where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act.
17 No diving contractor who conducts a diving operation shall use or permit to be used a diving bell in the diving operation unless the diving bell
(a) meets the requirements of sections 14 and 15;
(b) is equipped to permit the safe transfer of persons under pressure to and from a surface compression chamber;
(c) is of a design that
(i) provides for an internal space of at least 2 m3 for two-person occupancy and 3 m3 for three-person occupancy,
(ii) enables divers to enter and exit without difficulty, and
(iii) allows at least two divers dressed-in for a diving operation to be seated comfortably therein;
(d) is equipped with valves, gauges and other fittings necessary to control the internal pressure and to indicate both inside the diving bell and at the diving station the internal and external pressures;
(e) is so equipped that any valve used to pressurize the diving bell is spring-loaded so as to close when not held in the open position;
(f) contains adequate equipment, including reserve facilities, for supplying the appropriate breathing mixture to persons occupying or working from the diving bell, which reserve facilities shall be protected against inadvertent operation and be capable of being brought on-line from inside the diving bell without the assistance of any other person;
(g) is equipped with a two-way oral communication system by means of which a person inside the diving bell can communicate with the diving supervisor of the diving operation and, via the diving supervisor, with other persons;
(h) contains equipment for lighting and heating the diving bell;
(i) is equipped with suitable emergency life-support equipment and provisions for each occupant of the diving bell;
(j) is equipped with a lifting device sufficient to enable an unconscious or injured diver to be hoisted into the diving bell by a person located in it;
(k) is provided with lifting equipment that enables the diving bell to be lowered to the depth at which the diving operation is to be conducted, to be maintained in its position and to be raised, all without excessive lateral, vertical or rotational movement;
(l) is provided with a means whereby, in the event of the failure of the lifting equipment referred to in paragraph (k), the diving bell can be returned to the surface and, where that means involves the shedding of weights, the controls for that shedding can be operated from within the diving bell, and a means is incorporated to prevent the accidental shedding of those weights;
(m) in addition to a primary lifting cable, is equipped with a suitable tag rope so designed that, in the event the primary cable breaks during a water-air interface transport, the tag rope will not permit the diving bell to descend to a depth greater than 25 m;
(n) is equipped with a secondary lifting eye, or similar device that is of at least the same strength as the primary lifting eye, and is provided with a secondary lifting cable that is readily available and that has at least the same strength as the primary lifting cable and is compatible with the secondary lifting eye or similar device;
(o) is fitted with equipment to enable occupants of the diving bell to monitor the temperature, oxygen and carbon dioxide levels within the diving bell;
(p) is equipped with a stroboscopic light that is automatically activated in the water and a pinger that operates at a frequency of 37.5 kHz;
(q) where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act, is fitted with a relocation transponder system that operates at a frequency of 37.5 kHz;
(r) where appropriate, is fitted with hull integrity valves and non-return valves on all gas and, where practicable, hot-water circuits connected to the diving bell;
(s) if manufactured after December 31, 1990,
(i) is so designed that, if necessary, a diver within the diving bell can
(A) disconnect or shear the primary lifting cable and the umbilical,
(B) disconnect or shear any other attachments that might prevent ascent,
(C) start, accelerate, decelerate or stop the ascent, and
(D) where practicable, start, accelerate, decelerate or stop the descent, and
(ii) is fitted with a device to record continuously and to preserve at least the last recorded four hours of data respecting temperature, oxygen levels, depth, time, oral communications, internal and external ambient pressure, and the quantity of breathing mixture and electrical power available for use in an emergency and, where practicable, carbon dioxide and humidity levels; and
(t) if manufactured on or before December 31, 1990, meets the requirements set out in paragraph (s) where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act.
18 No diving contractor who conducts a diving operation shall use or permit to be used a diving submersible in the diving operation unless
(a) the compression chamber of the diving submersible meets the requirements o
The text continues in the official source.
