Beta
SOR-2026-34:en
SOR-2026-34:en — Steel Derivative Goods Surtax Remission Order
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI1 Subject to section 5, remission is granted of surtaxes paid or payable under the Steel Derivative Goods Surtax Order in respect of goods imported for use by any of the following entities for the purpose of health care, public health, public safety, national defence or national security:
(a) a government health research organization or clinical health research organization;
(b) an organization that produces or stores medical countermeasures, including pharmaceuticals or medical devices;
(c) the office of a public health official, as defined in subsection C.10.001(1) of the Food and Drug Regulations;
(d) an organization that provides ambulance or other emergency response services;
(e) a firefighting service;
(f) a law enforcement agency;
(g) a federal or provincial correctional service;
(h) the Department of National Defence;
(i) the Canadian Forces; or
(j) the Canadian Security Intelligence Service.
2 Subject to section 5, remission is granted of surtaxes paid or payable under the Steel Derivative Goods Surtax Order in respect of goods imported
(a) for use in the provision of medically necessary health care services, including services provided at
(i) a hospital,
(ii) a health care or dental clinic,
(iii) a medical, dental or diagnostic laboratory, or
(iv) a long-term care facility; or
(b) for use, for the purpose of health care or public health, by:
(i) an entity that provides products or services related to blood, cells, tissues or organs for medically necessary health care, or
(ii) a federal, provincial, local or Indigenous health authority.
3 Subject to section 5, remission is granted of surtaxes paid or payable under the Steel Derivative Goods Surtax Order in respect of the goods referred to in any of Schedules 1 to 3.
4 Subject to section 5, remission is granted of surtaxes paid or payable under the Steel Derivative Goods Surtax Order in respect of utility wind towers, and sections of those towers, that are classified under tariff item 7308.20.00 and that:
(a) are imported for installation on an offshore energy project; or
(b) are the subject of a purchase order, signed before December 26, 2025 by the proponent of an energy project in Canada, that specifies their price and quantity.
5 Remission is granted on the following conditions:
(a) in the case of a good referred to in column 2 of Schedule 1, it is classified under the tariff classification number set out in column 1;
(b) in the case of a good referred to in column 2 of Schedule 2,
(i) it is classified under the tariff classification number set out in column 1, and
(ii) it is imported into Canada before the date specified in column 3;
(c) in the case of a good referred to in column 3 of Schedule 3,
(i) it is imported into Canada by a person whose business number is set out in column 1, if any,
(ii) it is classified under the tariff classification number set out in column 2,
(iii) it is imported during the period specified in column 4, if any, and
(iv) it is imported in accordance with the conditions set out in column 5, if any;
(d) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and
(e) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
6 This Order comes into force on the day on which it is registered.
SCHEDULE 1(Section 3 and paragraph 5(a))GoodsColumn 1Column 2ItemTariff Classification NumberGood13925.20.00Doors, windows and their frames and thresholds for doors27308.10.00Bridges and bridge-sections, of iron or steel37308.30.00.28Motor-operated (gear head) rolling industrial galvanized steel service door, of specification ASTM 653, with coating of galvanized zinc or zinc-iron alloy (galvannealed) by hot-dip process, with slat and hood finish47308.90.00 (a)Adapters for crossing gates, of steel, safety sensitive, with an assembled length of 32 inches, with an assembled width of 12 inches, with an assembled height of 7 inches;
(b)Glare screen systems, of 25-gauge steel sheet of grade AISI 1008 or 1010, hot-dip galvanized to ASTM A653 with a G90 coating and powder-coated, supplied with 0.75 inch attachment hardware, concrete expansion anchors and splice plates of 4140/42 steel with a thickness of 0.375 inch, with all hardware galvanized;
(c)Stamped or embossed door skins;
(d)Structural steel bottom bracket assemblies, fabricated as bent carbon steel plate assemblies, of specification ASTM A572 Grade 50, supplied with concrete screw anchors, with electro zinc plating conforming to ASTM B633;
(e)Structural steel foundation retrofit brackets, fabricated as welded assemblies from carbon steel plate, of specification ASTM A572 Grade 50, with a thickness of 0.25 inch, 0.3125 inch or 0.375 inch, with bolt holes and bearing surfaces, uncoated or hot-dip galvanized;
(f)Round structural steel tubes, welded, of specification ASTM A500 Grade C, with an outer diameter of 2.875 inches, with a wall thickness of 0.165 inch, with a length of 36 inches, galvanized;
(g)Steel couplers, welded, of specification ASTM A500 Grade B, with an outer diameter of 2.5 inches, with a wall thickness of 0.125 inches, with a length of 6 inches;
(h)External structural steel sleeves, welded, of specification ASTM A500 Grade B or C, with a flared end, with an outer diameter of 3.5 inches, with a wall thickness of 0.216 inches, with a length of 30 inches or 48 inches;
(i)Structural plate brackets, of carbon steel plate, of specification ASTM A36, with a thickness of 0.25 inches, with square dimension of 4.5 inches by 4.5 inches, with a welded cylindrical ring, with an outer diameter of 1.5 inches, with a wall thickness of 0.25 inches, with a length of 1.38 inches;
(j)Bent structural steel C-brackets, of carbon steel plate, of specification ASTM A36, with a thickness of 0.1875 inches, with bracket dimensions of 3.0 inches by 6.0 inches, with a welded cylindrical ring, with an outer diameter of 1.5 inches, with a wall thickness of 0.25 inches, with a length of 1.38 inches;
(k)Structural steel beam splice bracket assemblies, of specification ASTM A36, consisting of two plates with a welded cylindrical ring of steel tubing, with a wall thickness of 0.25 inches, with a length of 1.38 inches, supplied with four bolts with corresponding nuts;
(l)Threaded steel rods, of specification ASTM F1554 Grade 55, with a welded heavy hex nut, with a diameter of 1 inch, with a length of 8 inches;
(m)Structural steel threaded post caps, with internal threads, of specification ASTM A108 Grade 1018, with an outer diameter of 3.0 inches, with a thickness of 1.0 inch;
(n)Round structural steel tubing, welded, of specification ASTM A500 Grade C, with an external diameter of 2.88 inches, with a wall thickness of 0.165 inches, with a length of 36 inches, 60 inches or 84 inches, galvanized, with an internal zinc coating;
(o)Structural steel bottom plate assemblies, of specifications ASTM A36 and ASTM A500, consisting of a plate of grade ASTM A36 with a thickness of 0.25 inches and dimensions of 3.5 inches by 3.5 inches, with a welded hollow structural section of specification ASTM A500 Grade B, of square cross-section, with cross-sectional dimensions of 2.0 inches by 2.0 inches, with a wall thickness of 0.25 inches, with a length of 0.75 inches;
(p)Structural steel base plate assemblies, of specification ASTM A36, ASTM A513 Type 5 or ASTM A53 Grade B, consisting of a carbon steel plate with a steel pipe, with an outer diameter of at least 2.75 inches but not exceeding 3.38 inches, with a wall thickness of at least 0.156 inches but not exceeding 0.188 inches, with a length of 4.0 inches, electro zinc-plated, conforming to ASTM B633;
(q)Adjustable structural steel bridge bracket assemblies, of specification ASTM A572 Grade 50, consisting of plates with telescoping components, with an adjustable overall length of at least 13.5 inches but not exceeding 16.5 inches, with a beam capture plate, supplied with bolts, electro zinc-plated;
(r)Structural steel lever bracket and runner assemblies, of specification ASTM A572 Grade 50, consisting of a lever bracket and a runner strap, with a beam capture plate of specification ASTM A36, supplied with bolts, nuts and wood screws, electro zinc-plated;
(s)Hydraulic lift cylinder assemblies, linear acting, pressure ratings not exceeding 8000 psi, supplied with structural steel top plates of specification ASTM A572 Grade 50, rods and couplers, hydraulic hoses and fittings, control valves and fasteners;
(t)Steel fence panels, formed as continuous corral panels, consisting of five horizontal 14-gauge steel tubes, with an outside diameter of 1.25 inches, and vertical steel rods with an outside diameter of 0.75 inches, with a length of 20 feet, with a height of 4 feet, uncoated;
(u)Double-headed steel pickets, with a diameter of 1 inch, with a length of 40 inches, electroless nickel-plated;
(v)Highway crash attenuation systems, end terminals, crash terminals, crash cushions, high-tension cable barrier systems, temporary barrier systems and truck- and trailer-mounted attenuators, of steel, wood and polymer, tested to the National Cooperative Highway Research Program (NCHRP) Report 350 or the Manual for Assessing Safety Hardware (MASH) of the American Association of State Highway and Transportation Officials (AASHTO);
(w)Redirective, non-gating crash cushion assembly, consisting of high molecular weight/high density polyethylene (HMW/HDPE) energy-absorbing cylinders, mounted on a self-contained or concrete backup structure;
(x)Gating, flared end-terminal system for roadside W-beam guardrail applications, in 6-post or 8-post configurations;
(y)Tangent end-terminal for W-beam guardrail systems, consisting of galvanized steel components, including guardrail sections, extruder head, hardware and posts
57308.90.00.70Girders and similar structural units, of steel67308.90.00.95Grills, air diffusers or ducts of iron or steel77308.90.00.99 (a)Turnbuckle stud assemblies for cable-barrier systems, of steel, including threaded stud and nut, with a diameter of 1 inch, with a length of 7.87 inches, galvanized;
(b)Cable spacers for cable-barrier systems, of steel, with a length of 0.15 m, galvanized;
(c)Sleeve covers for cable-restraint system posts, of steel, with a width of 0.15 m, with a length of 0.2 m, hot-dip galvanized;
(d)Dust covers for cable-restraint system posts, of steel, with a diameter of 180 mm, with a depth of 50 mm, galvanized;
(e)Cable-barrier posts, of carbon steel, with a nominal height of 5.7 feet, with a length of 1.52 m, 10-gauge, galvanized;
(f)Short posts for cable-barrier systems, of carbon steel, with a length of 1.2 m, galvanized;
(g)Post straps for cable-barrier systems, of steel, with a thickness of 6 mm, galvanized;
(h)Post caps for cable-barrier systems, of steel, stamped, with a nominal height of 7.7 feet, with a width of 0.15 m, with a length of 0.15 m, hot-dip galvanized;
(i)Washers, of carbon steel, with an inner diameter of 0.31 inches, with a zinc coating;
(j)Washers, of hardened steel, of specification ASTM F436, with a diameter of 0.75 inches;
(k)Hex nuts, of steel, of specification ASTM A194 2H, with a diameter of 0.75 inches;
(l)Hex bolts, of steel, of specification ASTM A307, with a diameter of 0.31 inches, with a length of 1.75 inches;
(m)Structural hex bolts, of steel, of specification ASTM A325, with a diameter of 0.75 inches, with a length of 4.50 inches;
(n)Post straps, of steel, with a thickness of 6 mm, with a length of 0.2 m, galvanized;
(o)Hook bolts, of steel, with threaded section and formed hook end, with a diameter of 0.31 inches, with a length of 1.75 inches, for use with cable-barrier post assemblies;
(p)Guardrail offset blocks or king blocks, of high-density polyethylene (HDPE), with a thickness of 4 inches, with a height of 7.5 inches, with a length of 14 inches;
(q)Cable lock bolts, of steel, with a locking head for cable retention, with a diameter of 0.31 inches, for use in cable-barrier assemblies;
(r)Lower posts for cable restraint system, of galvanized steel, with a length of 84 inches, for use in roadside barrier systems;
(s)Post caps, of steel, stamped, with a width of 150 mm, with a length of 150 mm, galvanized;
(t)Washers, of hardened steel, of specification ASTM F436, with a diameter of 1 inch;
(u)Retroflective panels, of steel, with a width of 5 inches, with a length of 24 inches, galvanized or coated;
(v)Cable stud assemblies, of steel, with a diameter of 25 mm, machined threads;
(w)Terminal posts, of steel, for Test Level 4 (TL-4) barrier systems, with a length of 71.62 inches, galvanized;
(x)Driven sleeves, of steel, with a wall thickness of 0.19 inches and with a length of 30.75 inches, galvanized;
(y)Base angles for cable anchor, of steel, with a thickness of 12 mm, with a width of 150 mm, with a length of 150 mm, galvanized;
(z)Cable-restraint post brackets, of steel, with a thickness of 6 mm;
(z.1)Line posts for a cable-control terminal, of steel, galvanized;
(z.2)Cable-restraint posts, of steel, galvanized, with a length of 0.61 m, supplied as an upper release-post assembly;
(z.3)End terminals for roadside guardrail systems, of steel, meeting MASH Test Level 3 performance criteria, consisting of posts, release hardware and anchorage components;
(z.4)Hex nuts, of carbon steel, of specification ASTM A563, with a diameter of 0.31 inches;
(z.5)Hex nuts, of steel, of specification ASTM A194 2H, with a diameter of 1 inch;
(z.6)Insulated metal panels, consisting of two profiled steel facings bonded to a rigid polyisocyanurate foam core, with a width of 40 inches, with a thickness of 3 inches or 4.5 inches, with a length of at least 96 inches but not exceeding 374 inches, with a polyvinylidene fluoride (PVDF) coating on the exterior facing and a polyester coating on the interior facing;
(z.7)Insulated structural panels, consisting of a mineral-wool core bonded to steel facings of 22-gauge, 24-gauge or 26-gauge thickness, with a width of 42 inches or 43 inches, with a length of at least 8 feet but not exceeding 48 feet, with a thickness of 3 inches or of at least 4 inches but not exceeding 8 inches;
(z.8)Malleable cast iron slip-on pipe clamp fittings of grade BS 340/12 equivalent or grade 420/12 equivalent, produced by malleable iron casting, non-threaded, with nominal pipe diameters of 0.75 inches, 1 inch, 1.25 inches, 1.5 inches or 2 inches, including pre-installed set screws, fluorocarbon coated;
(z.9)Forged low-alloy steel integral wellhead casing spool of grade AISI 4130 / UNS G41300, of specification API 6A PSL-3, API 20B or API 20C and NACE MR0175 / ISO 15156, electric-furnace melted, forged, normalized, quenched and tempered, with an outer diameter of 584 mm, an overall length of 670 mm, a through-bore diameter of 276 mm, a weight of 623 kg (1374 lb), with 279 mm studded flange top and bottom connections and two 52 mm studded side outlets, no surface coating;
(z.10)Forged low-alloy steel oilfield tubing head of grade AISI 4130 / UNS G41300, of specification API 6A PSL-1, API 20B or API 20C and NACE MR0175 / ISO 15156, electric-furnace melted, forged, normalized, quenched and tempered, with a through-bore diameter of 164 mm (6.45 inches), an overall length of 359 mm (14.12 inches), with a 179 mm (7-1/16 inch) flange top connection, a 178 mm slip-on-weld bottom connection and two 51 mm threaded side outlets, semi-finished, no surface coating;
(z.11)Forged low-alloy steel oilfield tubing head assembly with offset bore and angled outlet configuration of grade AISI 4130 / UNS G41300, of specification API 6A, API 20B or API 20C and NACE MR0175 / ISO 15156, electric-furnace melted, forged, normalized, quenched and tempered, with a 279 mm (11 inches) studded flange bottom connection, a 179 mm (7-1/16 inch) flange top connection positioned on a 36 mm (1.40 inches) offset centre line and two 52 mm (2-1/16 inch) studded side outlets, semi-finished, no surface coating;
(z.12)Forged low-alloy steel oilfield tubing head with metal-to-metal slip-lock seal lower connection of grade AISI 4130 / UNS G41300, of specification API 6A PSL-2, API 20B or API 20C and NACE MR0175 / ISO 15156, electric-furnace melted, forged, normalized, quenched and tempered, with a through-bore diameter of 226 mm (8.88 inches), an overall length of 422 mm (16.62 inches), with a 279 mm (11 inches) flange top connection, a 244 mm (9-5/8 inch) outside-engagement metal-seal lower connection and two 52 mm (2-1/16 inch) extended-flange side outlets, semi-finished, externally treated with manganese or zinc phosphate conversion coating;
(z.13)Forged low-alloy steel oilfield tubing head assembly with offset upper bore and integrated secondary tubing head outlet of grade AISI 4130 / UNS G41300, of specification API 6A, API 20B or API 20C and NACE MR0175 / ISO 15156, electric-furnace melted, forged, normalized, quenched and tempered, with a 279 mm (11 inches) studded flange bottom connection, a 179 mm (7-1/16 inch) flange top connection on a 30 mm (1.188 inches) offset centre line, one 79 mm (3-1/8 inch) secondary tubing head outlet inclined 9 degrees with metal-to-metal seal profile and two 52 mm (2-1/16 inch) extended-flange side outlets, semi-finished, externally treated with phosphate conversion coating;
(z.14)Carbon steel cable splice assemblies for 3x7 wire rope, consisting of forged splice body, threaded rods and nuts, of grade ASTM A572, AISI 1045, ASTM F1554 Grade 55, ASTM F1554 Grade 105, ASTM A563 or ASTM A194, of specification ASTM A741, forged and stamped, case-hardened, with a splice body diameter of at least 64 mm, with a length of at least 191 mm but not exceeding 991 mm, galvanized to ASTM A153;
(z.15)Carbon steel sleeves for high tension cable barrier systems, of grade ASTM A500 Grade B, of specification AASHTO M270, formed and machined, with a cross-section of 127 mm by 83 mm and with a length of 781 mm, with a cross-section of 102 mm by 76 mm and with a length of 781 mm, or with a cross-section of 76 mm by 102 mm and with a length of 1067 mm, hot-dip galvanized to ASTM A123;
(z.16)Carbon steel bar grating panels of grade A36, of specification ANSI/NAAMM MBG 531 or MBG 532, with a smooth or serrated surface, with a bearing bar depth of at least 0.75 inches but not exceeding 4 inches, with a bearing bar thickness of at least 0.125 inches but not exceeding 0.375 inches, with a bearing bar spacing of 19/16 inches and with a cross bar spacing of 2 inches or 4 inches, with a width of at least 2 feet but not exceeding 3 feet and with a length of at least 20 feet but not exceeding 24 feet, bare or hot-dip galvanized to ASTM A123;
(z.17)Stainless steel bar grating panels of grade 304 or 316, of specification ASTM A240 and ANSI/NAAMM MBG 531, with a smooth or serrated surface, with a bearing bar depth of at least 1 inch but not exceeding 2 inches, with a bearing bar thickness of at least 0.125 inches but not exceeding 0.187 inches, with a bearing bar spacing of 19/16 inches and with a cross bar spacing of 4 inches, with a width of 3 feet and with a length of at least 20 feet but not exceeding 24 feet, mill finish or electropolished;
(z.18)Carbon steel or stainless steel (grade 316) channel grating end plates, of specification ASTM A1008 or ASTM A240, with a thickness of at least 3/16 inches but not exceeding 1/4 inch, with a width of at least 1 1/2 inches but not exceeding 2 inches and with a length of at least 4 3/4 inches but not exceeding 12 inches, with round hole of 7/16 inch and slot hole of 7/16 inch by 1 3/8 inches, galvanized to ASTM A123 or electropolished;
(z.19)Steel rings, of grade S355NL-Z25 or S420NL-Z25, of specification DIN EN 10025-3, with an outer diameter of at least 3268 mm but not exceeding 4750 mm, with an inner diameter of at least 3088 mm but not exceeding 3927.5 mm, with a thickness of at least 107 mm but not exceeding 432 mm
87312.10.00 (a)Wire hanging system and gripping mechanisms designed to work together to support HVAC ductwork installations with wire containing a red filament woven in, meeting SMACNA standards, seismic tested conforming to ICC Code guidelines AC284;
(b)Steel ropes and cables, containing from 6 to 35 strands, new, of rope grade 1960, 2160 or 2400, of a diameter of at least 3.18 mm but not exceeding 63.50 mm, whether ungalvanized, galvanized or plastic-coated
97312.10.00.22 (a)Custom profiled steel wire used to manufacture automotive wheel balancing weights (designed to adhere to the inside of the wheel using double-sided foam tape), made of low-carbon steel grade 1006, with dimensions of 0.120 × 0.598 x 0.690 inches, supplied in coil form;
(b)Custom profiled steel wire used to manufacture automotive wheel balancing weights (designed to adhere to the inside of the wheel using double-sided foam tape), made of low-carbon steel grade 1006, with dimensions of 0.120 × 0.498 × 0.787 inches, supplied in coil form;
(c)Stranded wire of non-alloy steel of specification ASTM A416, cold-drawn, stress-relieved, of grade 270, stranded in 1x7 construction, with a nominal diameter of at least 9.3 mm but not exceeding 15.2 mm, uncoated, epoxy-coated or galvanized;
(d)Stranded wire of non-alloy steel of specification ASTM A416, cold-drawn, stress-relieved, of grade 270, stranded in 1x7 construction, with a diameter of 12.7 mm, uncoated, epoxy-coated or galvanized;
(e)Stranded wire of non-alloy steel of specification ASTM A416, cold-drawn, stress-relieved, of grade 270, stranded in 1x7 construction, with a diameter of 15.2 mm, uncoated, epoxy-coated or galvanized;
(f)Stranded wire of non-alloy steel of specification A416/A416M-17a, of grade 270, of a diameter exceeding 5 mm
107312.10.00.31 (a)High carbon steel stranded wire ropes of grade 220, of specification modified EN 10138 Class A, stranded in 1x7 construction, cold drawn and stress relieved, with a diameter of 0.3125 inches and a reel length of 8500 feet, galvanized with a coating mass not exceeding 60 g/m2;
(b)High carbon steel stranded wire ropes of grade 220, of specification modified EN 10138 Class A, stranded in 1x7 construction, cold drawn and stress relieved, with a diameter of 0.3125 inches and a reel length of 6000 feet, galvanized with a coating mass not exceeding 60 g/m2;
(c)High carbon steel stranded wire ropes of grade 220, of specification modified EN 10138 Class A, stranded in 1x7 construction, cold drawn and stress relieved, with a diameter of 0.375 inches and a reel length of 7000 feet, galvanized with a coating mass not exceeding 60 g/m2;
(d)High carbon steel stranded wire ropes of grade Extra Improved Plow Steel (EIPS), of specification EN 12385, stranded in 6x19 class FC construction with fibre core, spheroidized annealed, with a diameter of 0.625 inches and a reel length of 5000 feet, galvanized;
(e)High carbon steel stranded wire ropes of grade EIPS, of specification EN 12385, stranded in 6x19 class FC construction with fibre core, spheroidized annealed, with a diameter of 0.75 inches and a reel length of 5000 feet, galvanized;
(f)High carbon steel stranded wire ropes of grade EIPS, of specification EN 12385, stranded in 6x19 class FC construction with fibre core, spheroidized annealed, with a diameter of 0.875 inches and a reel length of 5000 feet, galvanized;
(g)New swage compacted stranded steel wire rope, 4-strand semi-rotation-resistant construction, K4xK36-FC construction, bright or galvanized finish, with a nominal diameter not over 25 mm, Tensile Strength: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(h)New strand compacted stranded steel wire rope, 6-strand, 6xk31 WS or 6xK36 WS construction, fibre core or independent wire rope core, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(i)New stranded steel wire rope, 6-strand, 6x19 Seale or 6x26 WS construction, fibre core or independent wire rope core, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(j)New stranded steel wire rope, 6-strand, 6x36 WS construction, fibre core, bright or galvanized finish, with a nominal diameter not over 25 mm; Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(k)New stranded steel wire rope, 6-strand, 6x36 WS construction, independent wire rope core, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(l)New swaged stranded steel wire rope, 6-strand, K6x31WS-IWRC or K6x36WS-IWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M or DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(m)New stranded galvanized aircraft cable, 7x7 or 7x19 construction, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(n)New strand compacted stranded steel wire rope, 8-strand, 8xK19S-PWRC(K) or 8xK26WS-PWRC(K) construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(o)New stranded steel wire rope, 8-strand, 8x19S-IWRC, 8x25F-IWRC, 8x26WS-IWRC, 8x31WS-IWRC, 8x36WS-IWRC or 8x41WS-IWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(p)New stranded steel wire rope, 8-strand, 8x25F-EPIWRC, 8x36WS-EPIWRC or 8x41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(q)New strand compacted stranded steel wire rope, 8-strand, 8xK19S-EPIWRC, 8xK26WS-EPIWRC, 8xK31WS-EPIWRC, 8xK36WS-EPIWRC or 8xK41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(r)New stranded steel wire rope, 8-strand, 8xK19S-IWRC or 8x36WS-IWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(s)New strand compacted stranded steel wire rope, 8-strand, 8xK26WS-PWRC(K)(EP), 8xK31WS-PWRC(K)(EP), 8xK36WS-PWRC(K)(EP) or 8xK41WS-PWRC(K)(EP) construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(t)New strand compacted stranded steel wire rope, 8-strand, 8xK31WS-IWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M, supplied on reels or cut lengths;
(u)New swage compacted stranded steel wire rope, 8-strand, K8x25F-EPIWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(v)New swage compacted stranded stainless steel wire rope, 4 outer strands, K4x19S-SFC construction, Stainless Steel Type AISI 304 - 1.4301, with a nominal diameter not over 25 mm; Tensile Strength: at least 1570 MPa but not exceeding 1770 MPa; Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(w)New stranded stainless steel aircraft cable, 7-strand, 7x7 or 7X19 construction, Stainless Steel Type 304 or 316, with a nominal diameter not over 25 mm; Tensile Strength: at least 1550 MPa but not exceeding 2210 MPa; Specification: RR-W-410; supplied on reels or cut lengths;
(x)New stranded stainless steel wire rope, 6-strand, 6x36 WS construction, independent wire rope core, Stainless Steel Type 304 or 316, with a nominal diameter not over 25 mm; Tensile Strength: at least 1550 MPa but not exceeding 2210 MPa; Specification: RR-W-410; supplied on reels or cut lengths;
(y)Galvanized carbon steel wire rope of grade Improved Plow Steel (IPS) or EIPS, of specification FS-RR-W410J or ASTM A1023, 6x19 construction with fibre core or independent wire rope core, preformed, right hand regular lay, with a diameter of at least 1/2 inch but not exceeding 3/4 inch, with a length of at least 2400 feet but not exceeding 3600 feet, heavy galvanized, lubricated;
(z)High carbon steel stranded wire ropes of specification AASHTO M30 and ASTM A741, 3x7 stranded, preformed, right regular lay, factory pre-stretched, with a diameter of 0.75 inches and with a length of 600 m or 1200 m, galvanized to Type 1 Class A
117312.10.00.32 (a)New swage compacted stranded steel wire rope, 4-strand semi-rotation-resistant construction, K4xK36-FC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(b)New strand compacted stranded steel wire rope, 6-strand, 6xk31 WS or 6xK36 WS construction, fibre core or independent wire rope core, bright or galvanized finish, over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(c)New stranded steel wire rope, 6-strand, 6x19 Seale or 6x26 WS construction, fibre core or independent wire rope core, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(d)New stranded steel wire rope, 6-strand, 6x36 WS construction, fibre core, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(e)New stranded steel wire rope, 6-strand, 6x36 WS construction, independent wire rope core, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(f)New swaged stranded steel wire rope, 6-strand, K6x31WS-IWRC or K6x36WS-IWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M or DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(g)New stranded steel wire rope, 8-strand, 8x19S-IWRC, 8x25F-IWRC, 8x26WS-IWRC, 8x31WS-IWRC, 8x36WS-IWRC or 8x41WS-IWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(h)New stranded steel wire rope, 8-strand, 8x25F-EPIWRC, 8x36WS-EPIWRC or 8x41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(i)New strand compacted stranded steel wire rope, 8-strand, 8xK19S-EPIWRC, 8xK26WS-EPIWRC, 8xK31WS-EPIWRC, 8xK36WS-EPIWRC or 8xK41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: IPS (1770), EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(j)New stranded steel wire rope, 8-strand, 8xK19S-IWRC or 8x36WS-IWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(k)New strand compacted stranded steel wire rope, 8-strand, 8xK26WS-PWRC(K)(EP), 8xK31WS-PWRC(K)(EP), 8xK36WS-PWRC(K)(EP) or 8xK41WS-PWRC(K)(EP) construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(l)New strand compacted stranded steel wire rope, 8-strand, 8xK31WS-IWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(m)New swage compacted stranded steel wire rope, 8-strand, K8x25F-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(n)New stranded stainless steel wire rope, 6-strand, 6x36 WS construction, independent wire rope core, stainless steel of grade 304 or 316, with a nominal diameter over 25 mm but not over 50 mm, of a tensile strength of at least 1410 MPa but not exceeding 2450 MPa, of specification RR-W-410; supplied on reels or cut lengths
127312.10.00.33 (a)New stranded steel wire rope, 6-strand, 6x36 WS, 6x41 WS or 6x49 WS construction, independent wire rope core, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(b)New stranded steel wire rope, 8-strand, 8x19S-IWRC, 8x25F-IWRC, 8x26WS-IWRC, 8x31WS-IWRC, 8x36WS-IWRC or 8x41WS-IWRC construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(c)New stranded steel wire rope, 8-strand, 8x25F-EPIWRC, 8x36WS-EPIWRC or 8x41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(d)New strand compacted, stranded steel wire rope, 8-strand, 8xK19S-EPIWRC, 8xK26WS-EPIWRC, 8xK31WS-EPIWRC, 8xK36WS-EPIWRC or 8xK41WS-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(e)New strand compacted, stranded steel wire rope, 8-strand, 8xK26WS-PWRC(K)(EP), 8xK31WS-PWRC(K)(EP), 8xK36WS-PWRC(K)(EP) or 8xK41WS-PWRC(K)(EP) construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths
137312.10.00.41 (a)New swage compacted stranded steel wire rope, 10 outer strands, category III rotation-resistant, K10x19S-EPIWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(b)New strand compacted stranded steel wire rope, 10 outer strands, 10xK31WS-EPIWRC(K) construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(c)New swage compacted stranded steel wire rope, 10 outer strands, K10x19S-PWRC or K10x25F-PWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(d)New stranded steel wire rope, 12 outer strands, category II rotation-resistant, 17x7 WSC, 18x7 WSC, 19x7-WSC, 18x19 WSC or 19x19 WSC, construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(e)New stranded steel wire rope, 16 outer strands, category I rotation-resistant, 29(W)xK7-KWSC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(f)New strand compacted stranded steel wire rope, 18 total strands, category II rotation-resistant, 18 x K19-KWSC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(g)New strand compacted stranded steel wire rope, 35 total strands, category I rotation-resistant, 35(W) x K7-KWSC, 35(W) x K17S-KWSC, 35(W) x K19W-KWSC or 35(W) x K25F-KWSC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(h)New stranded steel wire rope, 9 outer strands, 9x19S-PWRC or 9x25F-PWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(i)New swage compacted stranded steel wire rope, 9 outer strands, K9x19S-PWRC or K9x25F-PWRC construction, bright or galvanized finish, with a nominal diameter not over 25 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(j)New stranded stainless steel wire rope, 12 outer strands, category II rotation-resistant, 19x7-WSC construction, stainless steel of grade 304, with a nominal diameter not over 25 mm; Tensile Strength: at least 1550 MPa but not exceeding 2450 MPa; Specification: RR-W-410; supplied on reels or cut lengths
147312.10.00.42 (a)New swage compacted stranded steel wire rope, 10 outer strands, category III rotation-resistant, K10x19S-EPIWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(b)New strand compacted stranded steel wire rope, 10 outer strands, 10xK31WS-EPIWRC(K) construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(c)New swage compacted stranded steel wire rope, 10 outer strands, K10x19S-PWRC or K10x25F-PWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(d)New stranded steel wire rope, 12 outer strands, category II rotation-resistant, 17x7 WSC, 18x7 WSC, 19x7-WSC, 18x19 WSC, or 19x19 WSC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M; supplied on reels or cut lengths;
(e)New stranded steel wire rope, 16 outer strands, category I rotation-resistant, 29(W)xK7-KWSC or 29(W)xK17S construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(f)New strand compacted stranded steel wire rope, 18 total strands, category II rotation-resistant, 18 x K19-KWSC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(g)New strand compacted stranded steel wire rope, 35 total strands, category I rotation-resistant, 35(W) x K7-KWSC, 35(W) x K17S-KWSC, 35(W) x K19W-KWSC or 35(W) x K25F-KWSC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(h)New stranded steel wire rope, 9 outer strands, 9x19S-PWRC or 9x25F-PWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: ASTM A1023/1023M or DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(i)New swage compacted stranded steel wire rope, 9 outer strands, K9x19S-PWRC or K9x25F-PWRC construction, bright or galvanized finish, with a nominal diameter over 25 mm but not over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths
157312.10.00.43 (a)New strand compacted, stranded steel wire rope, 10 outer strands, 10xK31WS-EPIWRC(K) construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(b)New strand compacted, stranded steel wire rope, 35 total strands, category I rotation-resistant, 35(W) x K7-KWSC, 35(W) x K17S-KWSC, 35(W) x K19W-KWSC or 35(W) x K25F-KWSC construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths;
(c)New stranded steel wire rope, 16 outer strands, category I rotation-resistant, 29(W) x K17S-KWSC, 29(W) x K19W-KWSC or 29(W) x K25F-KWSC construction, bright or galvanized finish, with a nominal diameter over 50 mm; Tensile Strength Grade: EIPS (1960) or EEIPS (2160); Manufacturing Standard: DIN EN 12385-1/2/4; supplied on reels or cut lengths
167312.90.00Steel wire rope and strand assemblies, fitted with end terminations, new, of a diameter of at least 57.15 mm but not exceeding 127.00 mm, whether ungalvanized, galvanized or plastic-coated177314.14.00 (a)Woven wire micronic filtering mesh, ASTM E2016 stainless steel (grade 304 or 316) roll, mesh openings range from 4 to 800 per inch, mesh diameter ranges from 0.0016 inches to 0.10 inches, dimension ranges from 36 inches to 48 inches wide by 100 feet long, weave type: plain Dutch weave or twill Dutch weave, mill finish;
(b)Woven wire ASTM E2016 stainless steel (grade 304) roll, opening size ranges from 2 to 370 mesh openings per inch, wire diameter ranges from 0.0010 inches to 0.080 inches, dimension ranges from 48 inches to 60 inches or 60 inches to 72 inches wide by 100 feet long, weave type: press-lock crimp, intercrimp, lockcrimp, plain crimp, plain weave, twill weave, mill finish;
(c)Woven wire ASTM E2016 stainless steel (grade 347) roll, 8 mesh wire openings per inch, 0.063 inches wire diameter, dimensions: 4 feet wide by 100 feet long, weave type: plain crimp, mill finish
(d)Woven stainless steel wire cloth (mesh), of cold-drawn stainless steel wire of grade AISI 304 or AISI 316, produced using plain weave, twill weave or Dutch weave, including reverse Dutch, with a wire diameter of at least 0.025 mm but not exceeding 0.500 mm, with a mesh count of at least 20 but not exceeding 400 wires per inch, with a mesh count tolerance of ±2%, with a width of at least 24 inches but not exceeding 60 inches, cleaned and degreased, in rolls or slit strips
187314.20.00Modular welded wire mesh security walls of steel, with steel tube posts and hinged doors, powder-coated finish197314.42.00PVC-coated galvanized carbon steel wire mesh for lobster traps, of specification ASTM A1064 and ASTM A641, with a wire diameter before coating of 0.099 inches (12.5 gauge) or 0.128 inches (10.5 gauge), PVC coated over zinc galvanization207314.50.00 (a)ASTM F1267 expanded metal grating stainless steel (grade 304), Short opening dimension is 1.33 inches, long opening dimension is 5.33 inches, load rating: 3 lbs/square foot, dimensions: 48 inches wide by 96 inches long, minimum 300 lbs;
(b)ASTM F1267 expanded metal sheets, stainless steel (grade 304 or 316), short opening dimension ranges from 0.187 inches to 1.500 inches, long opening dimension ranges from 0.500 inches to 3.000 inches, metal thickness ranging from 0.026 inches to 0.140 inches, flat or raised style, dimensions: 48 inches wide by 96 inches long
217315.11.00 (a)Roller chain of carbon, alloy or stainless steel, of specification ANSI/ASME B29.1, including simplex roller chains, heavy roller chains, duplex chains, double pitch drive chains, double pitch conveyor chains and agricultural CA-type chains, with a pitch of at least 6 mm but not exceeding 101.6 mm, with a link plate height of at least 6 mm but not exceeding 47.8 mm and with a pin diameter of at least 2.31 mm but not exceeding 19.85 mm, uncoated, zinc-flake coated or nickel plated;
(b)Roller chain coils or connecting links of grade 4140, of specification ANSI B29.1, cold-rolled, with a length of at least 27 inches but not exceeding 27.04 inches, oiled;
(c)Roller chain coils of grade 4140, of specification ANSI B29.1, cold-rolled, with a length of at least 27 inches but not exceeding 27.04 inches, nickel plated;
(d)Roller chain of carbon steel, alloy steel or stainless steel of specification ANSI B29.1, ISO 606B, BS 228 or DIN 8187, assembled, with an inner link width of at least 0.125 inches but not exceeding 1.875 inches, with a roller diameter of at least 0.13 inches but not exceeding 2.25 inches and with a pitch of at least 0.25 inches but not exceeding 4 inches, rustproofed, nickel plated, zinc plated or treated;
(e)Roller chain of specification ANSI 2080, with a pitch of 2 inches, 1 row, heavy duty, with a length of 10 feet, of stainless steel;
(f)Roller chain of specification ANSI 2160, with a pitch of 2 inches, 1 row, heavy duty, with a length of 10 feet, with attachment;
(g)Roller chain of specification ANSI 40, with a pitch of 1/2 inch, 1 row with 25 links, without connecting link;
(h)Roller chain of specification ANSI 41, with a pitch of 1/2 inch, 1 row with 44, 46, 72, 78 or 96 links, including 1 junction link;
(i)Roller chain of specification ANSI 41 or 410, with a pitch of 1/2 inch, 1 row with 48 links, endless, riveted;
(j)Single-strand roller chain of carbon steel and alloy steel of grade SAE 1010, SAE 1040 and SAE 4119, with a pitch of 0.5 inches, of specification ANSI 40 or 41, with a connecting link, uncoated;
(k)Roller chain of specification ANSI 50, with a pitch of 5/8 inch, 1 row with 100 links;
(l)Roller chain of specification ANSI 50, with a pitch of 5/8 inch, 1 row with 76 or 96 links, including 1 junction link;
(m)Roller chain of specification ANSI 81x, with a pitch of 1/2 inch, 1 row, with a length of 10 feet, with attachment
227315.12.00 (a)Leaf chain of carbon, alloy or stainless steel, of specification ANSI B29.8, of balanced or unbalanced construction, uncoated, zinc-flake coated or nickel plated;
(b)Steel bicycle chains of bushing-type (non-roller) design, of specification ISO 606, with a pitch of 12.7 mm, with an inner width of at least 2.18 mm but not exceeding 3.175 mm, for single-speed through 12-speed drivetrains;
(c)Chain of carbon steel, alloy steel or stainless steel of specification ISO 4948, ANSI B29.22.2001, ANSI B29.15M 1997 or ANSI B29.10M 1997, assembled, with an inner link width of at least 1 inch but not exceeding 11 inches, with a roller diameter of at least 0.906 inches but not exceeding 4.5 inches and with a pitch of at least 1.75 inches but not exceeding 18 inches, rustproofed, nickel plated, zinc plated or treated;
(d)Pintle chain of specification ANSI 667, with a pitch of 112 or 155, with flat bar at a centre to centre distance of 16.000 inches, with a thickness of 0.375 inches, with a height of 1 inch;
(e)Pintle chain of specification ANSI 88K, with a pitch of 119, with flight bars at a centre to centre distance of 22.000 inches, with a thickness of 0.375 inches, with a height of 1.25 inches high;
(f)Pintle chain of specification ANSI 88K, with a 2.609 inch pitch, with 138 links with flat bar, with a centre to centre distance of 24.739 inches, with a thickness of 0.5 inches, with a height of 1.25 inches;
(g)Special chain of specification ANSI C55, with a 1.631 inch pitch, with 1 row, with a length of 50 feet, heavy duty;
(h)Special welded steel chain of specification ANSI 82, with a pitch of 40, with attachment A22, with alternated attachment at a pitch of 20, non-standard, with bushed feet, heat treated
237315.19.00 (a)Connecting links, offset links and repair links of carbon, alloy or stainless steel, for use with roller chain and leaf chain, including spring clip, cottered, press-fit, single offset and double offset types, coated or uncoated;
(b)Parts for roller chain of carbon steel, alloy steel or stainless steel of specification ANSI B29.1, ISO 606B, BS 228 or DIN 8187, assembled, with an inner link width of at least 0.125 inches but not exceeding 1.875 inches, with a roller diameter of at least 0.130 inches but not exceeding 2.25 inches and with a pitch of at least 0.25 inches but not exceeding 4.0 inches, rustproofed, nickel plated, zinc plated or treated;
(c)Parts for chain of carbon steel, alloy steel or stainless steel of specification ISO 4948, ANSI B29.22.2001, ANSI B29.15M 1997 or ANSI B29.10M 1997, assembled, with an inner link width of at least 1 inch but not exceeding 11 inches, with a roller diameter of at least 0.906 inches but not exceeding 4.5 inches and with a pitch of at least 1.75 inches but not exceeding 18 inches, rustproofed, nickel plated, zinc plated or treated
(d)Low carbon steel or alloy steel tire chain parts, including cross chains pre-assembled with hooks, loose cross chain hooks (standard and bell-shaped), side chain end hooks, side chain fasteners and side chains with cam tightening devices, with a wire or material diameter of at least 4.5 mm but not exceeding 13 mm, clear lacquer coated
247315.20.00 (a)Low carbon steel or alloy steel complete tire chains for on-highway vehicles, including cable or wire anti-skid devices, hoop-style chains, studded chains, V-bar chains, square link chains and regular twist link chains, in single or triple configurations, with or without cam side chain tightening devices, with a wire or link diameter of at least 3.8 mm but not exceeding 17.3 mm, clear lacquer, zinc plated, bright zinc or PVC coated, for use on passenger vehicles, light trucks, SUVs, medium trucks, heavy trucks and ATVs/UTVs;
(b)Low carbon steel or alloy steel complete tire chains for off-highway equipment, including studded diamond pattern, H-pattern, square link, net link, multi-ring and U-grip configurations, with a wire or link diameter of at least 7 mm but not exceeding 32 mm, clear lacquer or grey paint coated, for use on agricultural, industrial, loader/grader, forklift and forestry equipment;
(c)Tire chains, of boron alloy steel, case hardened, with a link wire diameter of at least 7 mm but not exceeding 22 mm, fitted with side chains, cross chains, hooks and tensioning components, whether oil-finished, painted or galvanized
257315.81.00 (a)Stud link anchor chain manufactured in accordance with ISO 1704 in Grades U2, U3 or U4, of carbon steel, with a diameter of at least 0.625 inches but not exceeding 2.500 inches and a length of 90 feet, galvanized or painted;
(b)Stud-link anchor chains of low-alloy steel of grade CM490 Grade 2, of specification ISO 1704 and GB/T 549-2017, welded, with a link diameter of 38 mm, with a link length of 228 mm, with an inside link opening of 152 mm long and 61 mm wide, with an overall chain length of 27.5 m, black oxide finish;
(c)Stud-link mooring or anchor chain, of specification ISO 1704, of grade 2 or 3
267315.82.00Long link studless mooring chain, of carbon steel, of specification ISO 1704, of grade U2 or U3, of a bar diameter of at least 0.375 inches but not exceeding 2.500 inches, with a length of 90 feet or 100 feet, galvanized or painted277315.82.00.10 (a)Welded-link conveyor chain of carbon steel, of nominal size 5/8 inch, of specification ANSI CNX, with 2 cross bars and conveyor attachments, with a pitch of 203 links, bright or oiled;
(b)Welded-link conveyor chain of carbon steel, of nominal size 5/8 inch, of specification ANSI CNX, of break-open design, with a pitch of 254 links, bright or oiled;
(c)Welded-link safety chain of carbon steel, of nominal size 5/16 inch, with a length of 40 inches, with clevis attachment, galvanized;
(d)Welded-link conveyor chain of carbon steel, of nominal size 5/8 inch, of specification ANSI CNX, of 2-strand construction with conveyor attachments, with a pitch of 179 links, bright or oiled;
(e)Chain and parts thereof, of iron or non-alloy steel, welded link, of grade G20, G30, G40, G43, G50 or G63, conforming to the standard entitled NACM Welded Steel Chain Specifications;
(f)Low carbon steel welded link chain in regular twist link pattern, to NACM tire chain specifications, with a wire diameter of at least 7 mm but not exceeding 10 mm, clear lacquer coated, for use as tire chain cross chains or side chains
287315.82.00.20 (a)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.19 inches, an inner length of 0.58 inches and an inner width of 0.25 inches, rated as Grade 50 with a working load limit of 1100 lbs, a minimum breaking strength of 4400 lbs, spheroidized annealed, uncoated;
(b)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.28 inches, an inner length of 0.85 inches and an inner width of 0.38 inches, rated as Grade 50 with a working load limit of 2200 lbs, a minimum breaking strength of 8800 lbs, spheroidized annealed, uncoated;
(c)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.39 inches, an inner length of 1.18 inches and an inner width of 0.55 inches, rated as Grade 50 with a working load limit of 4400 lbs, a minimum breaking strength of 17 600 lbs, spheroidized annealed, uncoated;
(d)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.51 inches, an inner length of 1.55 inches and an inner width of 0.75 inches, rated as Grade 50 with a working load limit of 7300 lbs, a minimum breaking strength of 29 200 lbs, spheroidized annealed, uncoated;
(e)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.63 inches, an inner length of 1.91 inches and an inner width of 0.90 inches, rated as Grade 50 with a working load limit of 9800 lbs, a minimum breaking strength of 39 200 lbs, spheroidized annealed, uncoated;
(f)Stainless steel chains of grade 316L, of specification MIL-DTL-32655, calibrated, with a diameter of 0.32 inches, an inner length of 0.95 inches and an inner width of 0.45 inches, rated as Grade 50 with a working load limit of 2700 lbs, a minimum breaking strength of 10 800 lbs, spheroidized annealed, uncoated;
(g)Alloy steel chains of grade 80, of specification EN 818, heat treated, quenched and tempered, spheroidized annealed, with a diameter of 0.75 inches, a length of 7 feet, link dimensions of 4.5 inches by 3 inches, ring diameter of 1 inch with a width of 8 inches across, toggle length of 12 inches and plate thickness of 0.75 inches, uncoated;
(h)Alloy steel chains of grade 80, of specification EN 818, heat treated, quenched and tempered, spheroidized annealed, with a chain diameter of 0.75 inches, a chain length of 7 feet, a ring diameter of 1 inch, a toggle length of 12 inches, link dimensions of 4.5 inches by 3 inches, a ring width of 8 inches across and a plate thickness of 0.75 inches, uncoated;
(i)Alloy steel chains of grade 80, of specification EN 818, heat treated, quenched and tempered, spheroidized annealed, with a chain diameter of 0.75 inches, an overall length of 9 feet, a ring diameter of 1 inch, a toggle length of 12 inches, link dimensions of 6.5 inches by 3.5 inches, a ring width of 10 inches across and a plate thickness of 0.75 inches, uncoated;
(j)Alloy steel chains of grade 80, of specification EN 818, heat treated, quenched and tempered, spheroidized annealed, with a chain diameter of 1 inch, an overall length of 7 feet, a ring diameter of 1 inch, a toggle length of 12 inches, link dimensions of 6.5 inches by 3.5 inches, a ring width of 10 inches across and a plate thickness of 0.75 inches, uncoated;
(k)Alloy steel chains of grade 80, of specification EN 818, heat treated, quenched and tempered, spheroidized annealed, with a chain diameter of 0.75 inches, a length of 100 feet, link dimensions of 6.5 inches by 3 inches and a ring diameter of 1 inch with a width of 8 inches across, galvanized;
(l)Open link (studless) anchor chains of low-alloy steel of grade CM490 Grade 2, of specification ISO 1704 and GB/T 549-2017, welded, with a link diameter of at least 28 mm but not exceeding 38 mm, with a link length of at least 168 mm but not exceeding 228 mm, with an inside link opening of at least 112 mm but not exceeding 152 mm long and at least 42 mm but not exceeding 60.8 mm wide, with an overall chain length of at least 1.14 m but not exceeding 27.5 m, black oxide finish;
(m)Chain and parts thereof, of iron or non-alloy steel, welded link, of grade G20, G30, G40, G43, G50 or G63, conforming to the standard entitled NACM Welded Steel Chain Specifications;
(n)Alloy steel welded link chain in square link pattern, with a wire diameter of at least 6 mm but not exceeding 11 mm, clear lacquer coated, for use as tire chain cross chains or side chains;
(o)Welded-link chain assemblies, of alloy steel, of grade 80, fitted with forged alloy steel hooks, with a chain diameter of at least 12.70 mm but not exceeding 31.75 mm, whether painted or uncoated
297315.89.00 (a)Alloy steel chain links of grade AISI 115MA or 105MA, or carbon steel chain links of specification ASTM A304, produced by investment casting (lost wax process), non-welded, as-cast or heat treated, of oval or round configuration, with a cross-sectional diameter of at least 16 mm but not exceeding 65 mm and with a length of at least 100 mm but not exceeding 400 mm;
(b)Sash chain of carbon steel, size 8, with a width of 0.245 inches, in rolls of 500 feet, zinc plated;
(c)Non-welded chains of carbon steel of grade SAE 1008, with a link length of 19 mm, with a wire diameter of 4.5 mm or 5 mm, with a rated load of at least 30.7 tonnes but not exceeding 31.4 tonnes, with a length of at least 20 feet but not exceeding 1000 feet, zinc plated;
(d)Carbon steel welded oval-link chain for gate closure, wi
The text continues in the official source.
