Beta
SOR-2025-122:en
SOR-2025-122:en — United States Surtax Remission Order (2025)
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (2026), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported for use by any of the following entities for the purpose of health care, public health, public safety, national defence or national security:
(a) a government health research organization or clinical health research organization;
(b) an organization that produces or stores medical countermeasures, including pharmaceuticals or medical devices;
(c) the office of a public health official, as defined in subsection C.10.001(1) of the Food and Drug Regulations;
(d) an organization that provides ambulance or other emergency response services;
(e) a firefighting service;
(f) a law enforcement agency;
(g) a federal or provincial correctional service;
(h) the Department of National Defence;
(i) the Canadian Forces; or
(j) the Canadian Security Intelligence Service.
2 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (2026), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported
(a) for use in the provision of medically necessary health care services, including services provided at
(i) a hospital,
(ii) a health care or dental clinic,
(iii) a medical, dental or diagnostic laboratory, or
(iv) a long-term care facility; or
(b) for use by any of the following entities for the purpose of health care or public health:
(i) an entity that provides products or services related to blood, cells, tissues or organs for medically necessary health care, or
(ii) a federal, provincial, local or Indigenous health authority.
3 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (2026) or the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported for use, in Canada, in the manufacture or processing of any good, in the production of any agricultural product or in the packaging of a food product or beverage.
3.1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported
(a) for use in the manufacture of motor vehicles or chassis for motor vehicles or in the manufacture of parts of or accessories for motor vehicles or chassis for motor vehicles; or
(b) for use in aircraft, ground flying trainers or spacecraft or in parts of aircraft, ground flying trainers or spacecraft.
4 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (2026) in respect of the goods referred to in column 1 of Schedule 1 that are classified under a tariff classification number set out in column 2.
4.1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (2026) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods referred to in column 2 of Schedule 2 or 3 that are classified under a tariff classification number set out in column 1.
4.2 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.
4.21 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (2026) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.1.
4.3 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Motor Vehicles 2025) in respect of
(a) motor vehicles that are classified under a tariff classification number set out in Schedule 5;
(b) all-terrain vehicles, including utility terrain vehicles and side-by-side vehicles; and
(c) hearses and hearse limousines.
4.4 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in Schedule 6.
5 Remission is granted on the following conditions:
(a) in the case of a good in respect of which remission is granted under section 1 or 2, it is imported into Canada before July 1, 2027;
(a.01) in the case of a good that is referred to in Schedule 1 or 1.1 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before July 1, 2027;
(a.02) in the case of a good that is referred to in Schedule 2 or 2.1 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before February 1, 2026;
(a.03) in the case of a good in respect of which remission is granted under section 3.1, it is imported into Canada on or after February 1, 2026 and before July 1, 2027;
(a.04) in the case of a good referred to in Schedule 3, it is imported into Canada before the date specified in column 3 of that Schedule;
(a.1) in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4,
(i) it is imported into Canada by a person whose business number is set out in column 1,
(ii) it conforms to the description set out in column 3, if any,
(iii) it is imported before September 1, 2025, and
(iv) it is imported in accordance with the conditions set out in column 4, if any;
(a.2) in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4.1,
(i) it is imported into Canada by a person whose business number is set out in column 1,
(ii) it conforms to the description set out in column 3, if any,
(iii) it is imported during the period specified in column 4, if any, and
(iv) it is imported in accordance with the conditions set out in column 5, if any;
(b) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and
(c) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
5.1 For greater certainty, there is no time limit that applies in respect of the importation of goods referred to in section 4.3 or in Schedule 1, 2, 5 or 6.
6 This Order comes into force on the day on which it is registered.
SCHEDULE 1(Section 4)GoodsColumn 1Column 2ItemGoodsTariff Classification Number1Specialized infant formulas2202.99.39.10
2202.99.39.20
2Nutrition formulas, metabolic products, formulated liquid diet or human milk fortifiers1901.90.34.90
1902.19.11.00
1902.19.12.30
1902.19.12.90
1902.19.19.00
1902.30.11.00
1902.30.19.00
2106.90.35.00
2106.90.39.90
2106.90.95.90
2202.99.39.10
2202.99.39.20
3Medical compression garments6115.10.10
6115.10.91
6115.10.99
4Sterile barrier film or pouches for use in medical manufacturing3923.21.90.90
6305.39.00.00
5The following freezers and refrigerators: (a)blood bank or plasma freezers;
(b)laboratory freezers;
(c)blood bank refrigerators;
(d)blood bank pass-thru refrigerators;
(e)laboratory refrigerators;
(f)pharmaceutical refrigerators;
(g)pharmaceutical or laboratory pass-thru refrigerators
8418.69.906Inter-hospital transfer vans with fewer than 10 passengers8703.24.00.92
SCHEDULE 2(Section 4.1)GoodsColumn 1Column 2ItemTariff Classification NumberGoods10404.10.10 (a)Instantized whey protein concentrate, with a minimum 80% protein on a dry basis;
(b)Instantized whey protein hydrolysate, with a minimum 80% protein on a dry basis and a level of hydrolysis of 1 to 4%;
(c)Whey protein concentrate 80%
21006.20.00.10Long grain brown rice, husked for bulk processing in Canada31006.30.00.11Long grain rice, semi-milled or wholly milled, whether or not polished or glazed, parboiled3.11205.10.00.10Low erucic acid rape or colza seeds, for sowing3.22204.29Wine of fresh grapes, other than sparkling wine, including fortified wines, in containers holding more than 10 litres, for further processing in Canada42505.10.00Silica sand and quartz sands53502.20.00 (a)Instantized whey protein isolate with a minimum of 90% protein on a dry basis;
(b)Whey protein isolate 90%;
(c)Hydrolyzed whey protein concentrate 80%
5.13918.90.90.90Linear low density polyethylene (LLDPE) grass in 200 foot long rolls, with a width of 26.75 inches5.23923.21.90Three-ply form-fit packaging, constructed entirely of linear low-density polyethylene, each ply with a thickness of 3.2 thousands of an inch, with a 2-inch fill port with membrane and cutter, and a 2-inch dispense port, with internal seal dimensions of a length of 45 inches, of a width of 45 inches, of a height of 47 inches63923.29.90Sacks and bags (including cones), of plastics73925.90.00Fibreglass bullet-resistant wall panels7.14011.70New pneumatic tires, of rubber, of a kind used on agricultural or forestry vehicles and machines84011.80.10New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines, for use with combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, of a size of 36.00 inches × 51 inches or 40.00 inches × 57 inches94011.80.90New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines with rim diameters of 27 inches or more9.14011.90.10New pneumatic tires, of rubber, for use with appliances of subheading 8424.82, combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, horticultural machinery for soil preparation and lawn or sports-ground rollers of heading 84.32, horticultural mowers (other than mowers for lawns, parks or sports-grounds) of heading 84.33 and of a size of 36.00 × 51 or 40.00 × 57104012.90.90Tire treads and tire flaps, of rubber114407.29.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of tropical wood: Cabreuva or Jatoba124407.91.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of oak (Quercus spp.): white oak or red oak134407.93.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of maple (Acer spp.)144407.94.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of cherry (Prunus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%, No. 2 or No. 3 common grade154407.95.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of ash (Fraxinus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%164407.99.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of hickory (Carya spp.) or black walnut (Juglans spp.)174408.10.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of coniferous wood184408.39.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of tropical wood: Other194408.90.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Other204409.29.90Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Of shagbark hickory (Carya ovata) or mockernut hickory (Carya tomentosa), with straight grain and free of knots and defects: squares of a width of 1 inch, height of 1 inch and length of 18.5 inches or dowels of a diameter of 0.805 inches or 0.875 inches20.14411.94.00Compressed paperboard strips, with a thickness of 0.4375 inch, with a width of 2.5 inches, with a length of 96 inches, plain or coated with plastic214412.33.00Plywood sheets, of poplar (Populus spp.), of a thickness of 3/8 inch, of dimensions 4 feet × 8 feet, industrial grade, 4-ply, C-C finish224412.99.00High density wood fibre panels, certified to be formaldehyde-free, of a thickness of 2.3 mm, sandblasted on both sides, light in colour22.14819.10.00Cardboard containers, 8-ply, of interior dimensions of 42.5 inches length by 34.5 inches width, exterior dimensions of 46.5 inches length by 38.5 inches width by 42 inches height22.114819.20.00Boxes, of corrugated fibreboard, of C-flute laminated construction, with an edge crush test rating of 55 ECT, with a length of 23.000 inches, with a width of 13.500 inches, with a height of 9.875 inches, waterproof22.24819.20.00.90Paperboard crates, of pressed or formed laminated paperboard, of a thickness of at least 0.160 inch but not exceeding 0.200 inch, with a cross-section of 5.0 inches by 5.0 inches, of a length of at least 21 feet but not exceeding 23 feet234819.30.00.10Sacks and bags, having a base of a width of 40 cm or more, multiwall, of paper244819.40.00.20Other sacks and bags, including cones, multiwall, of paper255703.21.00Synthetic turf for sports applications for conversion into a modular system made in Canada, of straight fibres extruded and tapered (layer 1) and texturized fibres extruded then texturized, stretched and tapered (layer 2)266305.33.00Polywoven bags, of a kind used for the packing of goods, of polyethylene or polypropylene strip or the like26.17106.92.00.90Composite strip made of beryllium copper (C17200) with silver overlay277113.11.10.90Clasps, posts, cups, earring backs or posts with settings, of 14 carat or 10 carat sterling silver, for use in the manufacture of jewelry287113.19.10.90Rope chain or curb chain, of 14 carat or 10 carat gold, for use in the manufacture of jewelry28.17116.20.90Polycrystalline diamond compact (PDC) cutters and blanks28.27207.20.00.30Ductile iron bars, of cast iron, hot-rolled or rough turned, of grade 65-45-12 or 80-55-06, of specification ASTM A53628.217208.26.00 (a)Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade A506 4130 annealed, of a minimum spheroidization of 95%, with a width of 600 mm or more, of a thickness of at least 3.98 mm but not exceeding 4.20. mm;
(b)Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade WSS M1A365 A5, of a width of 600 mm or more, of a thickness of at least 3.54 mm but not exceeding 3.65 mm;
(c)Flat-rolled products of high-carbon steel, in coils, of grades 1050 or 1035, of specification SAE J403, of a thickness of 0.114 or 0.118 inch, of a width of at least 43.275 inches but not exceeding 51.375 inches, pickled, dry and spheroidize annealed
28.227208.27.00 (a)Flat-rolled products of carbon steel, in coils, hot-rolled, pickled and oiled, of grade SAE J2340 490XF or 550XF, of a thickness of at least 1.06 mm but not exceeding 1.58 mm, of a width of 600 mm or more;
(b)Flat-rolled products of steel, hot-rolled, in coils, of specifications SAE J2340 340XF, 420XF, 490XF, 550XF, and ASTM A606 Type 4, of a thickness of at least 0.049 inch but not exceeding 0.108 inch, whether or not slit, with slit widths of at least 3.018 inches but not exceeding 35.700 inches, with full coil widths of at least 36.000 inches but not exceeding 54.375 inches;
(c)Flat-rolled products, in coils, of carbon steel, not further worked than hot-rolled, pickled and oiled, of grade JIS G3113 SAPH 440, of a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.71 mm;
(d)Flat-rolled products, in coils, of carbon steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J2340 340XF, of a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.66 mm;
(e)Flat-rolled products, in coils, of carbon steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J2340 550 XF, of a width of 600 mm or more, of a thickness of at least 1.70 mm but not exceeding 1.91 mm
28.237208.38.00.10Flat-rolled products of non-alloy steel, in coils, hot-rolled, of a specification ASTM A606 Type 4, of a thickness of at least 0.171 inch but not exceeding 0.184 inch, with a width of 48 inches, with a mill surface finish or an untreated surface finish28.37208.38.00.50Flat-rolled steel sheets, hot-rolled, of a length of 240 inches, of a width of 84 inches, with a thickness of 11GA, and grade of SAE J403GR101028.317208.39.00 (a)Flat-rolled products of carbon steel, in coils, hot-rolled, of grade SAE J403 1050, spheroidized annealed, of a thickness of at least 0.090 inch but not exceeding 0.097 inch, with a width of 48 inches, with a hot-rolled surface finish;
(b)Flat-rolled products of carbon steel, in coil, hot-rolled, of grade SAE J403 1037, of a thickness of at least 0.055 inches but not exceeding 0.071 inch, of full coil widths of at least 47.500 inches but not exceeding 48.375 inches, of slit widths of at least 6.75 inches but not exceeding 24.00 inches, with a hot-rolled surface finish
28.327209.15.00Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold-reduced), annealed, of grade SAE J403 1018, with a minimum spheroidization of 95%, of a thickness of at least 4.24 mm but not exceeding 4.35 mm, with a width of 600 mm or more28.337209.16.00 (a)Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade SAE J2340 550Y, JIS G3135 SPFC 590 or GMW 3032 M-ST-S 210B2, of a thickness of at least 1.00 mm but not exceeding 1.68 mm, of a width of 600 mm or more, uncoated;
(b)Flat-rolled products, in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1050, fully annealed, of a thickness of at least 2.54 mm but not exceeding 2.70 mm, with a width of 600 mm or more;
(c)Flat-rolled products, in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), annealed, in coils, of grade BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness exceeding 1.0 mm but less than 3.0 mm, with a width of 600 mm or more
28.347209.16.00.40Flat-rolled products of iron or non-alloy steel, in coils, of specification SDI, of a width of 600 mm or more, of a thickness exceeding 1 mm but less than 3 mm28.47209.16.00.90 (a)Flat-rolled products, in coils, of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of a width of 600 mm or more, with a thickness exceeding 1 mm but less than 3 mm, with zinc aluminum magnesium alloy coating;
(b)Flat-rolled products, in coils, of non-alloy steel, not further worked than cold-rolled (cold-reduced), of specification GMW3399M CR590T/340Y DP, with a thickness of 1.39 mm, with a width of 481.99 mm
28.57209.17.00 (a)Flat-rolled products of carbon steel, in coils, not further worked than cold-rolled (cold reduced), of grade GMW 3032 M - ST-S 210B2 or GMW3032M-ST-S-CR180B2, of a thickness of at least 0.74 mm but not exceeding 1.00 mm, with a width of 600 mm or more;
(b)Flat-rolled products of non-alloy steel, in coils, cold-rolled (cold-reduced), of a specification SAE J2340 340XF, of a thickness of at least 0.019 inch but not exceeding 0.022 inches, with a slit width of 23.425 inches, with a full coil width of 48 inches, gauge range from 0.019 to 0.022 inch, with a pickled and oiled finish;
(c)Flat-rolled products, in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300, or MS1500, with a thickness of at least 0.5 mm but not exceeding 1.0 mm, with a width of 600 mm or more, annealed
297209.18.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of less than 0.5 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070307210.12.00Tinplate sheets of dimensions 28.5 inches × 28.875 inches, 30 inches × 30 inches or 34.875 inches × 34.875 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)30.017210.30.00 (a)Flat-rolled products, in coils, sheets and plates of carbon steel, electro-galvanized, of grade WSS-M1A365-A14 CR4 60g/60g u/o Exposed, with a width of 600 mm or more;
(b)Flat-rolled products, in coils, of non-alloy steel, cold-rolled, electro-galvanized, of grade M-190, of specification ASTM A980, with a thickness of at least 0.028 inch but not exceeding 0.031 inch, with a width 50.5 inches, with a slit width of 9.95 inches, with a zinc coating ZN132, unpassivated and oiled finish;
(c)Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, with a width of 600 mm or more, hot-dipped, galvanized and chemically treated dry;
(d)Flat-rolled products, of carbon steel, of grade CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness not exceeding 3 mm, with a width of 600 mm or more, electrolytically coated with zinc
30.027210.49.00 (a)Flat-products, in coils, sheets and plates, of non-alloy steel, cold-rolled, galvanized, of grade ASTM A1008 J2329, with a width of 600 mm or more, of a thickness of at least 0.80 mm but not exceeding 0.91 mm;
(b)Flat-rolled products, in coils, of low-alloy steel, galvanized, of specification SAE J2340 550XF, of a thickness of at least 0.0374 inch but not exceeding 0.0413 inch, with a slit width of 21.8504 inches, with a full coil width of 44.100 inches, with a hot-dip galvanized coating, unpassivated and oiled;
(c)Flat-rolled products, in coils, of galvanized steel, of specification SAE J2340 250B, of a thickness of at least 0.044 inch but not exceeding 0.049 inch, with a slit width 8.431 inches, with a full coil width of 42.655 inches, with a hot-dip galvanized coating, unpassivated and oiled;
(d)Flat-rolled products, in coils, of galvanized low-alloy steel, of specification SAE J2340 550XF, of a thickness of at least 0.047 inch but not exceeding 0.049 inch, with a slit width of 35.19 inches, with a full coil width of 43.7 inches, with a hot-dip galvanized coating, unpassivated and oiled;
(e)Flat-rolled products, of steel strip in oscillated coils, galvanized, of a standard CSA C22.2 No. 56-17 Section 7.2.2, with a depth of 0.0170 inch or 0.0185 inch, with a width of 0.3560 inch or 0.0394 inch;
(f)Flat-rolled products, of carbon steel, hot-dip galvanized, of grade 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP or TRIP1180, with a thickness of 0.5 mm or more, with a width of 600 mm or more, with a zinc coating, other;
(g)Flat-rolled products, of carbon steel, hot-dip galvanized, of specification FCA 50002-LAC550Y620T G-40, with a thickness of 0.5 mm or more, with a width of 600 mm or more, with a zinc coating, other;
(h)Flat-rolled products, of carbon steel, hot-dip galvanized, of grade BH180, BH210, BH240, BH270, HSLA240, HSLA300, HSLA340, HSLA380, HSLA420, HSLA500, HSLA550, HSLA590, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness of 0.5 mm or more, with a width exceeding 1702 mm, with a zinc coating, other;
(i)Flat-rolled products, of carbon steel, hot-dip galvanized, of specification SAE J2340 550XF, with a thickness of at least 0.5 mm but not exceeding 2 mm, with a width exceeding 1270 mm, with a zinc coating, other;
(j)Flat-rolled products, of hot-dip galvanized steel, of grade ASTM A36, of a thickness of at least 1.905 mm but not exceeding 3.4544 mm, of a width of at least 1 219.2 mm but not exceeding 1 524 mm, with a length of at least 1 930.4 mm but not exceeding 3 048 mm, with a zinc coating of grade G90, other
30.047210.49.00.70 (a)Flat-rolled products, of non-alloy steel, galvanized with zinc, not corrugated, with a thickness of at least 1.849 mm but not exceeding 2.052 mm, of a width of at least 662 mm but not exceeding 989 mm, with a zinc coating or a zinc phosphate conversion coating, with a surface finish;
(b)Flat-rolled products, of non-alloy steel, cold-rolled, not corrugated, of a thickness of at least 1.275 mm but not exceeding 1.326 mm, of a width of at least 1 073 mm but not exceeding 1 076 mm, electrogalvanized with zinc, with a zinc coating and surface finish;
(c)Flat-rolled products, in coils, of iron or non-alloy steel, hot-dip galvanized, of grade LAC420Y480T G190/90, of specification MS 52002, with a thickness of at least 2.616 mm but not exceeding 2.819 mm, with a width of 840.0034 mm, with an HDG 90G90G coating
30.17210.61.00 (a)Flat-rolled steel, in coils, of specification CSA G401-24, of a thickness of 1.6, 2.0 or 2.8 mm, of a width of 690 mm, 692 mm or 863 mm, with an aluminium and zinc coating of 1 ounce per square feet;
(b)Flat-rolled products, in coils, sheets or plates, of carbon steel, of grade ASTM A463 CQ T-125, with a width of 600 mm or more, plated or coated with aluminum-zinc alloys
317210.69.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with aluminum, other than with aluminum-zinc alloys327210.70.00Flat-rolled products of iron or non-alloy steel, with a width of 600 mm or more, painted, varnished or coated with plastic337210.90.00 (a)Flat-rolled products of iron or non-alloy steel of a width of 600 mm or more, clad, plated or coated: PVC-coated metal sheets that have all of the following characteristics:
(i)Grade: G90,
(ii)Specification: ASTM A653-23-CS, type B,
(iii)Thickness/diameter: 24 gauge steel,
(iv)Width: 96 inches,
(v)Length: 48 inches, and
(vi)Coating: 20 mil (0.5 mm) Duradek PVC film;
(b)Other flat-rolled products, in plates, clad by explosion bonding, with a carbon steel base of specification ASME SA516 and Grade 70, with nickel alloy cladding of alloy 600, with a base thickness of 15.875 mm or 31.75 mm, with a cladding thickness of 4.7625 mm
33.017211.14.00.90Flat-rolled products, of non-alloy steel, in coils, not further worked than hot-rolled, of grade SAE/AISI 1070 to 1075, SAE/AISI C1050 or SAE/AISI 4130, of a thickness of at least 4.75 mm but not exceeding 6.35 mm, uncoated but oiled33.027211.23.00 (a)Flat-rolled products, in coils, sheets, and plates, of carbon steel, not further worked than cold-rolled (cold-reduced), annealed, of grade SAE J404 8620, of a thickness of at least 4.95 mm but not exceeding 5.06 mm, of a width of less than 600 mm;
(b)Flat-rolled products, of iron or non-alloy steel, not further worked than cold-rolled (cold-reduced), of grade 1006, of a width of at least 10.16 mm but not exceeding 12.70 mm, of a thickness of at least 0.30 mm but not exceeding 0.36 mm
33.17211.29.00 (a)Flat-rolled products of iron or non-alloy steel, cold-rolled, not clad, plated or coated, of a thickness not exceeding 0.0098 inch, of a width not exceeding 23.625 inches, of grade AISI 1045, 1050, 1055, 1067 to 1070 or 1075, of specification ASTM A682 or ASTM A684;
(b)Flat-rolled steel strips, cold-rolled and annealed, of high-carbon SAE 1095 spring steel, of a thickness of 0.9 mm, of a width of 500 mm;
(c)Flat-rolled products, of spring-steel strip, hardened and tempered, of grade SAE/AISI 1095, of a thickness of at least 0.2 mm but not exceeding 2.5 mm, uncoated but lightly oiled;
(d)Flat-rolled products, in coils, of carbon steel, not further worked than cold-rolled (cold-reduced), tempered, of grade UNS G10700, UNS G10740 or UNS G10750, of a thickness of at least 0.45 mm but not exceeding 3.31 mm, of a width of at least 2.99 mm but not exceeding 177.80 mm, with slit or edge-conditioned edges, oiled;
(e)Flat-rolled products, of carbon steel, not further worked than cold-rolled (cold-reduced), of grade BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness not exceeding 3.0 mm, with a width of less than 600 mm, annealed
347212.10.00Tinplate coil of a length of 3 inches, 4.625 inches, 6.3125 inches, 11.3 inches or 16 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)34.0017212.20.00 (a)Flat-rolled products, in coils, sheets or plates, of carbon steel, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, of a width of less than 600 mm, electrolytically plated or coated with zinc;
(b)Flat-rolled products, of carbon steel, of grade CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, of a thickness of at least 0.5 mm, with a width of less than 600 mm, electrolytically coated with zinc
34.00117212.30.00 (a)Flat-rolled products, in coils or cut lengths, of carbon steel, hot-dip galvanized, of grade 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP or TRIP1180, with a thickness of at least 0.5 mm, with a width of less than 600 mm, otherwise coated with zinc;
(b)Flat-rolled products, in coils or cut lengths, of carbon steel, hot-dip galvanized, of specification FCA 50002-LAC550Y620T G-40, with a thickness of at least 0.5 mm, with a width of less than 600 mm, otherwise coated with zinc
34.0027212.30.00.40Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, with a width of less than 600 mm34.0037212.40.00.21Flat-rolled products, of coils, sheets or plates, of carbon steel, of a width of less than 600 mm, plated or coated with zinc, electrolytically, and painted, varnished or coated with plastics34.0047212.40.00.90Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm, hot-dipped, galvanized, polymer-laminated34.0057212.50.00Flat-rolled products, in coils, sheets or plates, of aluminized carbon steel, of grade ASTM A463 CQ T-125, of a width of less than 600 mm34.00517212.50.00.4034.00527212.50.00.5034.0067212.50.00.60Flat-rolled products, in coils, of carbon steel, of grade 1006, with a thickness of at least 1.44 mm, of a width of less than 600 mm34.0077213.99.00Bars and rods, of iron or non-alloy steel, in irregularly wound coils, hot-rolled, of special bar quality carbon steel, of grade AISI 1536M, of a diameter of at least 0.8125 inch but not exceeding 1.1250 inches, with a coil length not exceeding 65 inches34.017214.91.00Continuous cast iron bars, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, of grade 65-45-12, 65-40-18, or 60-55-06, with rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches34.027214.99.00 (a)Continuous cast iron bars of grade 65-45-12, 65-40-18, 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch up but not exceeding 20 inches, with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches, a length of at least 2 inches but not exceeding to 40 inches;
(b)Special quality bars and rods of non-alloy steel, not further worked than forge, hot-rolled, of a diameter of at least 1 inch but not exceeding 10 inches, of grade 1018, 1020, 1022, 1040, 1045, 1055, ASTM105, ASTM108, ASTM350, ASTM36, or SA105 (VAR- vacuum degassed);
(c)Other bars and rods, of carbon steel, not further worked than forged, hot-rolled, hot-drawn or extruded but including those twisted after rolling, of grade AISI/SAE 1045 or AISI/SAI 1018, of specifications ASTM A29 and ASTM A576, of a diameter of at least 152.40 mm but not exceeding 355.60 mm
34.0217214.99.00.41Round steel bars, hot rolled, of grades 55 and 105, of a diameter of at least 0.50 inch but not exceeding 3.00 inches, uncoated34.0227215.10.00Other bars, of iron or non-alloy steel, not further worked than cold-formed or cold-finished, including ground, turned or polished, of grade 1018, without coating or plating34.0237215.10.00.20 (a)Other steel bars, rounds, of free-cutting steel, not further worked than cold-formed or cold-finished, of grade C1018, of specification ASTM A108, of an outer diameter of at least 0.625 inch but not exceeding 5.750 inches;
(b)Other bars and rods, rounds, of free-cutting steel, not further worked than cold-formed or cold-finished, of grade AISI 1215 or 1144, of specification ASTM A108 or ASTM A311, with an outer diameter exceeding 114.3 mm
34.037215.10.00.90 (a)Bars and rods of free cutting steel, cold formed, of a diameter of 1.46 inches, of grade B 1018;
(b)Bars and rods of free cutting steel, cold formed, of a diameter of 1.312 inches, of grade 10B21;
(c)Bars and rods of free cutting steel, cold formed, of a diameter of 1 inch, of grade SAPH P and 1022;
(d)Bars and rods of free cutting steel, cold formed, of a diameter of 1.078 inches, of grade 1022
34.047215.50.00 (a)Bars and rods of cast iron, continuous, not further worked than cold-formed or cold-finished, of grade 65-45-12, 65-40-18 or 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch but not exceeding 20.0 inches or with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches;
(b)Bars, cold-rolled, of grade C1018 or C1045, of a thickness of at least 0.75 inch but not exceeding 4 inches, of a length of 20 feet;
(c)Bars, cold-rolled of grade C1045, of yield of 90 ksi, of a thickness of 2.125 inches, of a length of 20 feet;
(d)Other bars, of iron or non-alloy steel, not further worked than cold-finished, including ground, turned or polished, of grade 1018, without coating or plating;
(e)Other bars, of iron or non-alloy steel, not further worked than cold-formed or cold-finished, of grade 1010, 1045, 1215 or 12L14, of specification ASTM A108, of a diameter of at least 4.57 mm but not exceeding 171.45 mm
34.04017215.50.00.21Other bars and rods, other, rounds, of carbon steel, not further worked than cold-formed or cold-finished, of grade AISI 1144 or 1045, of specification ASTM A108, with a diameter exceeding 4.50 inches, ground, turned or polished34.0417215.50.00.29 (a)Other bars, other, rounds, of non-alloy steel, not further worked than cold-formed or cold-finished, quenched and tempered, of grade 1045, with an outer diameter of 1.50 inches or 1.75 inches, of a length of at least 12 feet but not exceeding 21 feet;
(b)Other bars and rods, rounds, other, of carbon steel, not further worked than cold-formed or cold-finished, of grade AISI 1144/1045, of specification ASTM A108, with a diameter exceeding 4.50 inches
34.0427215.50.00.90Other bars and rods, other, of carbon steel, not further worked than cold-formed or cold-finished, of grade AISI 1018, of specification ASTM A108, with a square cross-section34.057215.90.00Other bars and rods of iron or non-alloy steel34.0517216.31.00.21U-section structural channels MC designation, American standard, of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 50, of specification ASTM A572 or CSA G40.21 345W, with a height of 304.8 mm, with a length of 15 240 mm, uncoated34.067216.32.00I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more34.077216.33.00H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more34.0717216.40.00.22L-section structural angles, with unequal legs of non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 50, of specification ASTM A572, with a height of 203.2 mm, with a width of 152.4 mm, with a thickness of 12.7 mm34.087219.11.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of a width of 600 mm or more34.097219.12.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 4.75 mm but not exceeding 10.00 mm, of a width of 600 mm or more34.17219.13.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more34.117219.14.00Flat-rolled products of stainless steel, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, of a width of 600 mm or more34.127219.21.0034.121[Repealed, SOR/2026-154, s. 28]34.137219.22.0034.147219.23.0034.157219.24.0034.167219.31.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75 mm or more, of a width of 600 mm or more34.177219.32.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a thickness of at least 3.00 mm but not exceeding 4.75 mm, of a width of 600 mm or more34.187219.33.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm34.197219.34.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm34.27219.35.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.5 mm34.2017219.90.0034.217220.11.00Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more34.2117220.12.00Flat-rolled products of stainless steel, not further worked than hot-rolled, of a thickness of less than 4.75 mm, of a width of less than 600 mm34.2127220.20.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of a width of less than 600 mm34.237220.90.00Flat-rolled products of stainless steel, of a width of less than 600 mm, other34.247221.00.00Bars and rods, of stainless steel, hot-rolled, in irregularly wound coils34.257222.11.00Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section34.2517222.19.00Other bars and rods, in angles, shapes and sections including hexagonal sections, of stainless steel, not further worked than hot-rolled, of grades 420, 440, 17-4 and 15-534.267222.20.00Bars and rods of stainless steel, not further worked than cold-formed or cold-finished34.277222.30.00Bars and rods of stainless steel, other34.287222.40.00Angles, shapes and sections of stainless steel34.297223.00.00357225.11.00Silicon-electrical steel, grain-oriented, of a width of 600 mm or more367225.19.00Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, other than grain-oriented36.17225.30.00 (a)Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 420XF (modified), according to specification WSS M1A365 A5, with a width of 600 mm or more, of a thickness of at least 3.54 mm but not exceeding 3.65 mm;
(b)Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 550XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.42 mm but not exceeding 1.58 mm;
(c)Flat-rolled products of other alloy steel, in coils not further worked than hot-rolled of grade 4130, with a width of 600 mm or more, of a thickness of at least 3.98 mm but not exceeding 4.20 mm, pickled and oiled, annealed;
(d)Flat-rolled products of other alloy steel, in coils, hot-rolled, pickled and oiled of grade 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.06 mm but not exceeding 1.27 mm;
(e)Flat-rolled products of alloy steel, in coils, hot-rolled, pickled and oiled, of grade SAE J2340 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.71 mm;
(f)Flat-rolled products of other alloy steel, in coils, not further worked than hot-rolled, of grade 550X, 420XF or 340XF, of specification SAE J2340, of a minimum thickness of at least 0.055 inch but not exceeding 0.059 inch, of a width of at least 44.00 inches but not exceeding 53.46 inches;
(g)Flat-rolled products, in coils, other, of other alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J2340 340XF, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.66 mm;
(h)Flat-rolled products, in coils, other, of other alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J2340 550XF, with a width of 600 mm or more, of a thickness of at least 1.70 mm but not exceeding 1.91 mm;
(i)Flat-rolled products, in coils, other, of other alloy steel, not further worked than hot-rolled, of grade 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, with a width of 600 mm or more
36.27225.40.00 (a)Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 420XF (modified) according to specification WSS M1A365 A5, with a width of 600 mm or more, of a thickness of at least .54 mm but not exceeding 3.65 mm;
(b)Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade JIS G3113 SAPH 440, with a width of 600 mm or more, of a thickness of at least 2.26 mm but not exceeding 2.30 mm;
(c) Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade SAE J2340 340XF, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.66 mm;
(d)Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 550XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.70 mm but not exceeding 1.91 mm;
(e)Flat-rolled products of other alloy steel, in sheets and plates, hot-rolled, pickled and oiled of grade 490XF, of specification SAE J2340, with a width of 600 mm or more, of a thickness of at least 1.49 mm but not exceeding 1.71 mm;
(f)Flat-rolled products of other alloy steel, not further worked than hot-rolled, of grades 4140, 1018, 1020, 1045, A2, D2, H13, L6, O1, P20, S7, M2, M7, M42, 4340, 8620 or 6150, with a width of 600 mm or more;
(g)Flat-rolled products, in sheets and plates, other, of other alloy steel, not further worked than hot-rolled, of grade 4130 or 8620, of specification SAE J404, ASTM A829 or ASTM A514, with a width of 600 mm or more;
(h)Flat-rolled products, in plates, other, of other alloy steel, not further worked than hot-rolled, of specification CAN/CSA G40.21 and of grade 50AT Category 3 or of specification ASTM A709 and of grade 50W Category 3, of a thickness of at least 9.52 mm but not exceeding 76.20 mm, with a width of at least 2.09 m but not exceeding 3.41 m, uncoated
36.217225.40.00.10 (a)Flat-rolled products, in plates, other, of other alloy steel, not further worked than hot-rolled, heat-treated, of grade A514, with a thickness of more than 70 mm;
(b)Flat-rolled products, in plates, other, of other alloy steel, not further worked than hot-rolled, heat-treated, with a Brinell Hardness Number (BHN) of 360 to 477, with a thickness of more than 70 mm;
(c)Flat-rolled products, in plates, other, of other alloy steel, not further worked than hot-rolled, heat-treated, with a Brinell Hardness Number (BHN) of 477 to 545, with a thickness of more than 31.75 mm;
(d)Flat-rolled products, in plates, of other alloy steel, not further worked than hot-rolled, heat-treated, with a Brinell Hardness Number (BHN) exceeding 545;
(e)Flat-rolled products, in plates, other, of other alloy steel, not further worked than hot-rolled, heat-treated, of specification ASTM A514 grade Q or of specification ASTM A709 grade 100, of a thickness of at least 6.35 mm but not exceeding 101.6 mm
36.37225.50.00 (a)Flat-rolled products of other alloy steel, in coils, not further worked than cold-rolled (cold-reduced), of grade SAE J2340 490XF, with a width of 49.193 inches, 52.470 inches or 56.720 inches, with a thickness of at least 0.022 inch;
(b)Flat-rolled products of other alloy steel, in coils, cold-rolled, of a width of 600 mm or more, dual phase, uncoated;
(c)Flat-rolled products, in plates, other, of other alloy steel not further worked than cold-rolled (cold-reduced), of grade 4140, 6150 or 4340, of a width of 600 mm or more, of a thickness of at least 7.0 mm but not exceeding 101.6 mm, spheroidized;
(d)Flat-rolled products, in coils, other, of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade 380XF, of specification SAE J2340, of a thickness of at least 1.14 mm but not exceeding 1.27 mm, with a width of at least 714.9 mm but not exceeding 715.00 mm;
(e)Flat-rolled products, other, of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness of 0.5 mm or more, with a width of 600 mm or more, annealed;
(f)Flat-rolled products, in coils, other, of other alloy steel, not further worked than cold-rolled (cold-reduced), of specification SAE J2340 340XF, with a width exceeding 1 550 mm, annealed
36.47225.50.00.30 (a)Flat-rolled coils, sheets and plates of carbon steel, cold-rolled (cold-reduced), of grade JIS G3135 SPFC 590, of a width of 600 mm or more, of a thickness of at least 1.52 mm but not exceeding 1.68 mm;
(b)Flat-rolled coils, sheets and plates of alloy steel, cold-rolled (cold-reduced), of grade SAE J2340 550Y, with a width of 600 mm or more, of a thickness of at least 1.19 mm but not exceeding 1.30 mm
36.57225.50.00.40Flat-rolled coils, sheets and plates of alloy steel, cold-rolled (cold-reduced), of grade 4130, with a width of 600 mm or more, of a thickness of at least 3.27 mm but not exceeding 3.38 mm, annealed36.67225.91.00 (a)Flat-rolled products, in coils, sheets and plates, other, of other alloy steel, with a width of 600 mm or more, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, electrolytically plated or coated with zinc;
(b)Flat-rolled products, of other alloy steel, of grade CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness of 0.5 mm or more, with a width of 600 mm or more, electrolytically coated with zinc
36.617225.92.00 (a)Flat-rolled products, other, of other alloy steel, of grade 980T/700Y-DP, 980T/700Y-MP, 980T/700Y-TRIP or TRIP1180, with a thickness 0.5 mm or more, with a width of 600 mm or more, hot-dip galvanized;
(b)Flat-rolled products, other, of other alloy steel, of specification GMW3032M-ST-420LA-HDG60G/60G-U, SAE J2340 380X 60G60G, SAE J2340 420X 60G60G or GMW3032-ST-S-340LA-HDG60G/60G-U, with a thickness of at least 0.5 mm but not exceeding 2.5 mm, with a width exceeding 1 524 mm, hot-dip galvanized;
(c)Flat-rolled products, other, of other alloy steel, of specification GMW3032M-ST-420LA-HDG60G/60G-U, SAE J2340 380X 60G60G, SAE J2340 420X 60G60G or GMW3032-ST-S-340LA-HDG60G/60G-U, with a thickness of at least 0.5 mm but not exceeding 2.5 mm, with a width exceeding 1 524 mm, hot-dip galvanized;
(d)Flat-rolled products, other, of other alloy steel, of specification SAE J2340 550XF, with a thickness of at least 0.5 mm but not exceeding 2 mm, with a width exceeding 1 270 mm, hot-dip galvanized;
(e)Flat-rolled products, other, of other alloy steel, of grade BH180, BH210, BH240, BH270, HSLA240, HSLA300, HSLA340, HSLA380, HSLA420, HSLA500, HSLA550, HSLA590, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness 0.5 mm or more, with a width exceeding 1 702 mm, hot-dip galvanized
36.77225.99.00Flat-rolled coils, sheets and plates of alloy steel, of grade ASTM A463 CQ T-125, with a width of 600 mm or more, plated or coated with aluminum or aluminum alloys377226.11.00Silicon-electrical steel, grain-oriented, of a width of less than 600 mm387226.19.00Silicon-electrical steel, non-oriented, of a width of less than 600 mm38.0017226.20.00Flat-rolled products, of other alloy steel, of grades M2, M7, M42, 8620 or 6150, with a width of less than 600 mm38.00117226.92.00 (a)Flat-rolled products of other alloy steel, in coils, sheets and plates, not further worked than cold-rolled (cold-reduced), of grade 8620, of specification SAE J404, with a width of less than 600 mm, of a thickness of at least 4.95 mm but not exceeding 5.06 mm, annealed;
(b)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, annealed, of a width of:
(i)at least 83.80 mm but not exceeding 84.05 mm,
(ii)at least 99.75 mm but not exceeding 100.00 mm, or
(iii)at least 153.80 mm but not exceeding 154.22 mm;
(c)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 CR SA, annealed, of a thickness of at least 3.00 mm but not exceeding 3.10 mm, with a width of:
(i)at least 33.80 mm but not exceeding 34.05 mm,
(ii)at least 38.10 mm but not exceeding 38.35 mm, or
(iii)at least 41.80 mm but not exceeding 42.05 mm;
(d)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1050 /55CR SA, of a thickness of at least 3.12 mm but not exceeding 3.22 mm, of a width of at least 47.75 mm but not exceeding 48.00 mm, annealed;
(e)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced) of grade SAE J403 1050 SA, of a thickness of at least 2.95 mm but not exceeding 3.05 mm, of a width of at least 139.50 mm but not exceeding 139.75 mm, annealed;
(f)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J404 4130 CR, of specification SAE, of a thickness of at least 2.95 mm but not exceeding 6.00 mm, with a width of at least 100.75 mm but not exceeding 186.50 mm, annealed;
(g)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J404 4130, of a thickness of at least 4.92 mm but not exceeding 5.00 mm, of a width of at least 97.75 mm but not exceeding 98.00 mm, annealed;
(h)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J404 4130, of a thickness of at least 2.90 mm but not exceeding 3.02 mm, annealed of a width of at least:
(i)at least 75.75 mm but not exceeding 97.00 mm, or
(ii)at least 245.75 mm but not exceeding 246.00 mm;
(i)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1050 SA, of a thickness of at least 3.93 mm but not exceeding 4.07 mm, of a width of at least 149.50 mm but not exceeding 149.75 mm, annealed;
(j)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 6150 SA, of a thickness of at least 3.45 mm but not exceeding 3.55 mm, of a width of at least 103.49 mm but not exceeding 103.74 mm, annealed;
(k)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J404 4130, of a thickness of at least 4.92 mm but not exceeding 5.08 mm, of a width of at least 97.75 mm but not exceeding 98.00 mm, annealed;
(l)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade SAE J404 4130, of a thickness of at least 6.23 mm but not exceeding 6.43 mm, of a width of at least 137.75 mm but not exceeding 138.00 mm, annealed;
(m)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade SAE J404 4130, of a thickness of at least 6.9 mm but not exceeding 7.1 mm, of a width of at least 96.75 mm but not exceeding 97.00 mm, annealed;
(n)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade ASTM A109 C1020, of a thickness of at least 1.9 mm but not exceeding 2.0 mm, of a width of at least 33.800 mm but not exceeding 34.025 mm;
(o)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade SAE J403 1008 CR, of a thickness of at least 1.90 mm but not exceeding 1.98 mm, of a width of at least 201.75 mm but not exceeding 202.00 mm, annealed;
(p)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, of a width of at least 83.80 mm but not exceeding 84.05 mm, annealed;
(q)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold reduced), of grade J403 1050 SA, of a thickness of at least 3.41 mm but not exceeding 3.49 mm, of a width of at least 99.75 mm but not exceeding 100.00 mm, annealed;
(r)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade ASTM A506 4130, of a thickness of at least 6.05 mm but not exceeding 6.25 mm, of a width of at least 83.8 mm but not exceeding 84.0 mm, annealed;
(s)Flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), of grade J403 1018 J403 SP, of a thickness of at least 3.91 mm but not exceeding 4.04 mm, of a width of at least 62.75 mm but not exceeding 63.00 mm, annealed;
(t)Flat‐rolled products of other alloy steel, not further worked than cold‐rolled (cold reduced), of grade SAE J404 4130 CR, of a thickness of at least 2.45 mm but not exceeding 2.57 mm, of a width of at least 75.75 mm but not exceeding 76.00 mm, annealed;
(u)Flat-rolled products, other, of other alloy steel, not further worked than cold-rolled (cold-reduced), annealed, of grade BH180, BH210, BH240, BH270, HSLA500, HSLA550, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, with a thickness not exceeding 3.0 mm, with a width of less than 600 mm, uncoated
38.0027226.99.00 (a)Flat-rolled coils, sheets and plates of carbon steel, with a width of less than 600 mm, of a thickness of at least 0.45 mm but not exceeding 4.00 mm, electrolytically plated or coated with zinc;
(b)Flat-rolled coils, sheets and plates of aluminized alloy steel, of grade ASTM A463 CQ T-125, with a width of less than 600 mm, plated or coated with aluminum or aluminum alloys;
(c)Flat-rolled products, other, of other alloy steel, of grade CQ/CS (CR1), DS/DQ/DQAK (CR2/CR3), DDS/DDQ (CR4), EDDS/EDDQ (CR5), S-EDDS/S-EDDQ (CR6), BH180, BH210, BH240, BH270, DP490, DP590, DP780, DP980, MP980, MP1180, TB980, TRIP590, TRIP690, TRIP780, TRIP980, TRIP1180, MS1300 or MS1500, of a width of less than 600 mm, of a thickness of 0.5 mm or more, electrolytically coated with zinc
38.017227.10.00Bars and rods, of special bar quality, of other alloy steel (other than stainless steel), hot-rolled, in irregularly wound coils, with a diameter of at least 1 inch but not exceeding 10 inches, drawn or extruded of grades ASTM588, ASTM350 or SA350 (VAR- vaccum degassed)38.0117227.90.00.83Bars and rods of other alloy steel, of special bar quality alloy steel, hot-rolled, in irregularly wound coils, of grades AISI 3130M, 4120M, 4320M or 4330M, of a diameter of 0.8125 inch but not exceeding 1.1250 inches, of a coil length of up to 65 inches38.027228.30.00 (a)Other bars and rods of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4130, of specification AISI 4130 or ASTM A29;
(b)Other bars and rods of other alloy steel, not further worked than hot-rolled, hot drawn or extruded, of grade 4140, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108 or UNS.G41400;
(c)Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 4150, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108, AISI 4150 or UNS G41500;
(d)Other bars and rods of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 9310, of specification ASTM A29, ASTM A322, ASTM A304, ASTM A108 or AISI 9310;
(e) and (f)[Repealed, SOR/2026-154, s. 41]
(g)Other bars and rods of other alloy steel, not further worked than hot-rolled or hot-drawn, of grade 4140, of a diameter of 4.75 inches, of a length of 20 feet;
(h)Other bars and rods, of special quality other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 3125, 4130, 4130H, 4140, 4140AQ, 4140H, 4145, 4145H, 4340, 8620, 8620H, 8625, 8630, 8637, 8640 or 8735, of specification AMS 6415 or AMS 2301, of a diameter of at least 1 inch but not exceeding 10 inches, vacuum degassed;
(i)Other bars and rods, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, seamless, of grade 4140 L80, of specification API 6A, with a nominal diameter of 3.25 inches, 3.50 inches or 3.75 inches, uncoated;
(j)Other bars and rods, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, seamless, of grade 4140, of specification API 6A P110 (100 KSI), with a nominal diameter of 3.750 inches, 4.250 inches or 5.125 inches, uncoated;
(k)Other bars and rods, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, seamless, of grade 4140, of specification API 6A L80, with a nominal diameter of 5.125 inches or 6.250 inches, uncoated;
(l)Other bars and rods, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, seamless, of grade 4130, of specification API 6A 75 KSI, with a nominal diameter of 3.5 inches, uncoated;
(m)Other bars and rods, of other alloy steel, not further worked than hot-rolled, hot-drawn or extruded, seamless, of grade 471
The text continues in the official source.
