LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2025-12:en

    SOR-2025-12:en — China Surtax Remission Order (2024)

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the China Surtax Order (2024) in respect of the goods referred to in Schedule 1 or 2. (2) Remission referred to in subsection (1) is granted on the following conditions: (a) in the case of a good referred to in Schedule 1 (i) it is not the subject of an order or finding, as defined in subsection 2(1) of the Special Import Measures Act, on the date of importation, and (ii) it is imported into Canada during the period beginning on October 22, 2024 and ending on December 31, 2026; (b) in the case of a good referred to in column 3 of Schedule 2 that is classified under the tariff item listed in column 2, it is imported into Canada by an importer listed in column 1 during the period specified in column 4, and any other applicable condition listed in column 5 is met; (c) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; (d) the good is not subsequently exported to the United States in the same condition in which it was imported; and (e) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation. 2 This Order comes into force on the day on which it is registered. SCHEDULE 1(Subsection 1(1) and paragraph 1(2)(a))Column 1Column 2ItemTariff ItemDescription of Goods17210.12.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated, or coated with tin, of a thickness of less than 0.5 mm27210.70.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished, or coated with plastics37212.10.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated, or coated with tin3.17212.30.00.10Flat-rolled products manufactured from non-alloy steel that have a width of less than 600 mm, are plated or coated with zinc, are of Grade DX51D or an equivalent grade and have a thickness of 0.14 mm47219.22.00.10Stainless steel plates, hot-rolled, not in coils, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 600 mm or more but not exceeding 1,830 mm57219.23.00Stainless steel sheets and plates, hot-rolled with 2B finish, of type 304 or 304L, with 11 gauge thickness, width of 5 feet, length of 20 feet, of specification ASTM A24067219.23.00Stainless steel sheets and plates, hot-rolled with 2B smooth finish, of type 304 or 304L, with 11 gauge thickness, width of 6 feet, length of 12 feet, of specification ASTM A24077219.31.00Stainless steel sheets and plates, cold-rolled with 2B smooth finish, of type 304 or 304L, with 3/16 inch thickness, width of 5 feet, length of at least 10 feet but not exceeding 20 feet, of specification ASTM A2407.17219.33.00.10Polished stainless steel coils and sheets of the following grades and finishes: – grade 304, finish No. 4 – grade 316, finish No. 2B – grade 316, finish No. 4 – grade 304, finish BA1 7.27219.33.00.90Polished stainless steel coils and sheets of grades 304 or 430 and finish No. 47.37219.34.00.10Polished stainless steel coils and sheets of grade 304 and finish No. 47.47219.34.00.90Polished stainless steel coils and sheets of grade 430 and finish No. 487220.20.00Flat-rolled stainless steel products, with a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), for use in the production of goods classified under tariff item 7310.10.0097222.19.00.21Stainless steel flat bars, not further worked than hot-rolled, hot-drawn, or extruded107222.20.00Stainless steel metric round bars, of type 304, cold-rolled, h9 tolerance, with an outer diameter of 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm or 60 mm, of specification ASTM A27610.17222.20.00.91Stainless steel bars and rods, not further worked than cold-formed or cold-finished, of grade 304 or 304L117222.30.00Stainless steel metric square bars of 30 mm or 40 mm, of type 304, cold-rolled, of length 4000 mm, of specification ASTM A276127223.00.00Stainless steel lashing wire or rebar tie wire137223.00.00Ultra-fine stainless steel wire, with a diameter of 0.15 mm or 0.28 mm13.17223.00.00.90Stainless steel wire with a triangular (delta) profile and a solid cross-section that is manufactured from grade 304, 304L, 316 or 316L stainless steel, and that has a hardness of 28 to 32 HRC, a cross-sectional area greater than 0.787 mm² and dimensions of 0.090 inch by 0.105 inch147225.11.00Silicon grain-oriented steel, with a width of 600 mm or more157225.99.00Specialty steel products: S-7 VRM steel plates, D-2 VRM steel plates or A-2 VRM steel plates167226.11.00Silicon grain-oriented steel, with a width of less than 600 mm177226.19.00Silicon amorphous steel, with a width of less than 600 mm187226.99.00Specialty steel products of grade 4140, heat-treated, annealed197228.30.00Round specialty steel products, of the following grades: of grade 4340, heat-treated, of grade 8620, of grade 3312, hot-rolled, annealed, of grade 1045, hot-rolled, of grade 1018, hot-rolled or of grade EN30B207228.40.00Alloy steel bars and rods217228.50.00Other bars of other alloy steel, not further worked than cold-formed or cold-finished21.017228.50.00.20Tool steel flat bars that are manufactured from alloy grades A8 MOD or H13 and that have a thickness of 1.375 inches or 3.00 inches21.027228.50.00.20Tool steel round bars that are manufactured from alloy grades D2 or A2 and that have diameters of at least 5.50 inches but not exceeding 13.00 inches21.17228.60.00Bars, of alloy or non-alloy steel, with an outside diameter of at least 25 mm but not exceeding 203 mm, with a wall thickness of at least 5 mm but not exceeding 38 mm and a length not exceeding 12 m, with forged or machined ends21.27304.11.00Seamless stainless steel tubes, of circular cross-section, with an external diameter not exceeding 114.3 mm227304.19.00Unfinished seamless carbon or alloy steel mother tubes that have an outside diameter of at least 184 mm but not exceeding 610 mm, a wall thickness of at least 9 mm but not exceeding 110 mm and a length of at least 7.72 m but not exceeding 15.24 m, that are not stenciled as meeting any line pipe product specification and that are suitable for use in the production, and not solely the finishing, of seamless line pipes manufactured to API 5L, CSA Z245.1, ISO 3183, ASTM A333, ASTM A335, ASTM A106, or ASTM A53237304.23.00Drill pipes, other than of stainless steel, of specification API 5DP or API 7-1247304.29.00.79Tubes, pipes and hollow profiles, seamless, of iron — other than cast iron — or steel: coupling stock, with an outside diameter of at least 2.875 inches but not exceeding 37 inches24.17304.31.00Cold-drawn seamless mechanical tube of grade C1026, with an outside diameter of at least 2.625 inches but not exceeding 4.25 inches, with an inside diameter of at least 1.75 inches but not exceeding 4 inches, and a wall thickness of at least 0.313 inch but not exceeding 1 inch24.27304.39.00Steel coupling stock, of specification API 5CT L80, no coating24.37304.39.00.70Seamless tubes and pipes, of iron or non-alloy steel, for use in oil and gas applications, with an outside diameter of at least 25 mm but not exceeding 406 mm, with a wall thickness of at least 3 mm but not exceeding 50 mm, with lengths not exceeding 12 m24.47304.49.00.90Seamless tubes and pipes, of stainless steel, annealed and pickled or bright finish, for oil and gas service, with an outside diameter of at least 25 mm but not exceeding 273 mm, with a wall thickness of at least 2 mm but not exceeding 30 mm, with lengths not exceeding 12 m24.57304.51.00 (a)Seamless tubes and pipes, of alloy steel, cold-drawn or cold-rolled, for use in drill pipe and completions equipment, with lengths up to 12 m, with an outside diameter of at least 25 mm but not exceeding 355 mm, with a wall thickness of at least 3 mm but not exceeding 40 mm; (b)Seamless or ERW carbon steel tubes, of grade 1010 or 1020, with an outside diameter of at least 4.95 inches but not exceeding 14.00 inches 24.67304.59.00Seamless tubing of alloy-steel, hot-finished, of an outside diameter of 5.50 inches and an inside diameter of 3.865 inches257304.59.00.60 (a)Alloy mechanical tubes of grade 4140 or 4130 Mod, of specification ASTM A519, with an external diameter of at least 3.5 inches but not exceeding 10 inches, of a wall thickness of at least 0.3 inch but not exceeding 1.5 inches, and black lacquer protective coating; (b)Seamless tubes, of alloy steel, with lengths not exceeding 12 m, of a kind used for oil or gas pipelines with an outside diameter of at least 25 mm but not exceeding 355 mm 25.017304.90.00.10Seamless non-alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m25.027304.90.00.20Seamless alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m25.17305.31.00.19Longitudinally welded pipes of grade 3 ASTM A25225.27305.39.00.20Spiral welded steel pipes, of circular cross-sections25.217306.30.00.41Welded steel tubes drawn over mandrel (DOM) that have circular cross-sections, and that have outer diameters of at least 4.95 inches but not exceeding 14.35 inches, a wall thickness of at least 0.185 inch but not exceeding 0.250 inch and inner diameters of at least 4.58 inches but not exceeding 13.85 inches25.37306.29.00Welded tubes of iron or non-alloy steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, and a wall thickness of at least 2.0 mm but not exceeding 7.6 mm25.47306.30.00.51Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A51925.57306.30.00.59Carbon steel DOM (drawn over mandrel) tubing, other than structural, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A51925.67306.30.00.61Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 168.28 mm but not exceeding 273.05 mm, of specification ASTM A513, A106 or A51925.77306.40.00.00Stainless steel of grade 304L flared tubes267306.40.00.10Stainless steel tubes, circular, of type 304L, with an external diameter not exceeding 25.3 mm277306.40.00.20Stainless steel tubes, circular, of type 304L, with an external diameter exceeding 25.3 mm but not exceeding 114.9 mm27.17306.50.00Welded tubes of circular cross-section, of alloy steel other than stainless steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, with a wall thickness of at least 2.0 mm but not exceeding 7.6 mm287306.61.00.39Steel tubes — other than galvanized — rectangular, of type 304L, with an external periphery not exceeding 812.8 mm297604.21.00Aluminum alloy hollow profiles with a powder coating finish on the interior and exterior surfaces307604.29.00Aluminum alloy bars, rods and profiles: Die #C300X110, Die #C410X110 or Die #169330.17604.29.00.11Bars of aluminum alloys, of round cross-section, with a cross-sectional dimension exceeding 12.7 mm317605.19.00Non-alloyed aluminum wire, with cross-sectional dimension not exceeding 7 mm, of grade AL-1350, compliant with the chemical requirements referred to in Table 2 of specification ASTM B233-97, of any of the following dimensions: – 0.175 inches in length by 0.075 inches in width – 0.175 inches in length by 0.095 inches in width – 0.200 inches in length by 0.105 inches in width – 0.250 inches in length by 0.105 inches in width – 0.256 inches in length by 0.128 inches in width – 0.312 inches in length by 0.130 inches in width – 0.250 inches in length by 0.150 inches in width – 0.312 inches in length by 0.165 inches in width 327606.11.00Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils337606.11.00Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, used as cathode sheets in zinc electrowinning processes347606.11.00Non-alloyed aluminum plates, sheets and strip, rectangular, of grade 1050 Aluminum “O” Coil or grade 1350 Aluminum “O” Coil, compliant with the chemical requirements of specification ASTM B233-97, with a thickness of at least 0.020 inches but not exceeding 0.060 inches, a width of at least 2 inches but not exceeding 33.5 inches, and a mill finish357606.12.00Aluminum alloy plates, sheets and strip, of a thickness exceeding 0.2 mm, rectangular35.17606.12.00Rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint367606.12.00.11 (a)Aluminum checker plate sheets of alloy 3003, with a base thickness of 4 mm, width of 4 feet and length of 10 feet; (b)Pre-painted aluminum coils, 3003-H24 with 8 or 12 µm polyester coating in black, brown or white, with a thickness of 0.5 mm and width of 610 mm; (c)Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness exceeding 0.2 mm but less than 7 mm; (d)Pre-painted aluminum coils, 3105-H26, with a thickness of at least 0.7 mm but not exceeding 0.8 mm, and a width of at least 1,240 mm but not exceeding 1,250 mm 37[Repealed, SOR/2025-210, s. 12]37.1[Repealed, SOR/2025-210, s. 12]387606.12.00.12Aluminum alloy plates, sheets and strip, with a thickness of 7 mm or more, rectangular, not clad, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils38.17606.12.00.12Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness of 7 mm or more38.27606.91.00.90Aluminum plates, in sheets and strips, that are manufactured from non-alloyed aluminum, have a thickness of at least 3.0 mm but not exceeding 5.5 mm, are circular and have a diameter of at least 100 mm38.217606.92.00Non-rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint38.37607.11.00Aluminum foil, rolled but not further worked, not backed, in coils or reels, with a thickness of at least 0.004 inch but not exceeding 0.010 inch, and a width of at least 0.98 mm but not exceeding 22 inches, whether or not surface-treated38.47607.11.00.20Aluminum foil, in rolls, that have a thickness of at least 0.013 mm but not exceeding 0.017 mm, a width of at least 5 inches and a maximum length of 1700 feet, and that are manufactured from alloy 1145, 1235, 8011, 8079, or 8066397607.19.00.00 (a)Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of alloys 3003, 3004, 3104, 8011 or 8111; (b)Aluminum foil, in precut sheets, that has a thickness of at least 0.013 mm but not exceeding 0.017 mm, a minimum width of 5 inches and a maximum length of 16 inches, and that is manufactured from alloy 1145, 1235, 8011, 8079, or 8066 39.17608.20.00Rigid aluminum conduit, threaded, in 10-foot lengths, in trade sizes of at least 0.5 inch but not exceeding 6 inches, with coupling on one end407609.00.00Aluminum tube or pipe fittings, of the following specifications: Wall thickness: approximately 0.106 inches at the thinnest point to approximately 0.783 inches at the thickest point Outer diameter: at least 1 inch but not exceeding 10 inches Length: at least 2 inches but not exceeding 12 inches Cylindrical shape, of the following grades and specifications: Grade: AA383, Specification: B85 Grade: AA713, Specification: B26 Grade: AA356 / AA356-T6, Specification: B108 Grade: 413.2, Specification: B179 NoteIf the description in column 2 covers only a subset of goods classified under the tariff item referred to in column 1, remission is granted only for the goods described in column 2. SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))Column 1Column 2Column 3Column 4Column 5ItemBusiness NumberTariff ItemDescription of GoodsPeriodConditions11026450827607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further workedFrom October 22, 2024 to December 31, 20261.11035693727229.90.00Chrome silicon wire, round, with a diameter of at least 1.5 mm but not exceeding 8.51 mmFrom October 22, 2024 to December 31, 20261.21054892727212.40.00Steel strapping, with open or closed steel sleevesFrom October 22, 2024 to August 31, 20257217.90.00Steel black annealed wire coils, rebar tie wire and galvanized black annealed wire coilsFrom October 22, 2024 to December 31, 20261.31054972427223.00.00.90Stainless steel wires of alloy 304L, cold drawn and annealedFrom October 22, 2024 to July 1, 202521194468477228.30.00.72Hot-rolled steel bars, of special bar qualityFrom October 22, 2024 to December 31, 202631229602227606.91.00.10Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, circular, with circumference from at least 6 inches but not exceeding 20 inchesFrom October 22, 2024 to December 31, 202641378642297305.31.00Coated permanent steel piles, longitudinally welded, with a pipe outer diameter of 1.219 m, a thickness of 25.4 mm and lengths not exceeding 95 mFrom October 22, 2024 to December 31, 20267305.39.00Spiral-welded steel piles that are used as temporary piles, and that have an outer diameter of at least 0.914 m but not exceeding 1.067 m and a length of at least 41 m but not exceeding 75 m4.11405159587604.29.00.30Extruded 5-star (blade) turbulator, with a diameter of 8.30 mm of alloy 6063, of temper T5, of straight lengths of up to 4877 mmFrom October 22, 2024 to December 31, 20267606.12.00.20Extruded rectangular micro channel tubes, 76.2 mm x 9.04 mm, with a wall thickness of 0.51 mm, of alloy 3003, of temper F, of straight lengths of up to 4877 mmFrom October 22, 2024 to December 31, 20267608.20.00Extruded round thin-walled aluminum tubes, of alloy 3003, of temper O, with an outside diameter of 9.09 mm, with a wall thickness of 0.51 mm, spooled on level wound coilsFrom October 22, 2024 to December 31, 20265 7095145097304.39.00Steel coupling stock or mechanical tubes, no coating, with diameter of at least 4 inches but not exceeding 20 inches, with a wall thickness of at least 0.5 inch but not exceeding 2 inches, imported in lots of random length tubes not exceeding 30 feet, and that are: (a)of specification ASTM A519/A513, of grade 1026, 4140, or 4130; (b)of specification API 5CT, of grade K55, L80, P110, C110, or Q125 From October 22, 2024 to December 31, 20255.17234293207305.39.00.20Welded tubes manufactured from non-alloy steel that have circular cross-sections and an outer diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 m, and that are used as single-wall steel casing in drilling foundation pilesFrom October 22, 2024 to December 31, 20267305.31.00.19Longitudinally welded tubes manufactured from non-alloy steel that have an outside diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 mFrom October 22, 2024 to December 31, 202667292403417606.12.00Flat-rolled aerospace-grade aluminum, of alloys 7475, 7075 or 2024From October 22, 2024 to December 31, 2025Imported for sale to company with business number 87136136677292403417606.12.00.12Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or moreFrom October 22, 2024 to March 31, 2025Imported for sale to company with business number 86107216387364012907223.00.00.90Stainless steel profile wire with a solid cross-sectional area greater than 0.787 mm2From October 22, 2024 to December 31, 20267306.40.00.10Stainless steel capillary line97371517207604.21.00.10Aluminum hollow profiles, unworkedFrom October 22, 2024 to December 31, 20267606.12.00.20Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, clad9.017415195247222.11.00.10Stainless steel rebarFrom October 22, 2024 to December 31, 20269.17475457477217.10.00Non-alloy steel wire, not plated or coated, whether polished or notFrom October 22, 2024 to December 31, 20257217.30.00Copper plated steel wires, plated or coated with other base metalFrom October 22, 2024 to June 1, 20269.27565509017604.29.00.30Aluminum profiles, extruded, with a cross-sectional dimension exceeding 254 mm, supplied in straight lengthsFrom October 22, 2024 to December 31, 2026107588332977210.70.00.90Pre-painted steel coils PPGI or PPGL, with a thickness of at least 0.37 mm but not exceeding 0.45 mm, AZ100 g/M² with polyester and epoxy coating in black or brown, and a width of at least 590 mm but not exceeding 1220 mmFrom October 22, 2024 to December 31, 202611 7610941197607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further workedFrom October 22, 2024 to December 31, 2026127697928707607.11.00Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding a length of 0.2 mm, rolled but not further worked, of alloy 3003 or 3004, with food-safe lubricationFrom October 22, 2024 to December 31, 2026137783404067606.12.00.20Aluminum sheets, with a thickness exceeding 0.2 mm, rectangular, clad, of alloy 3003 or 4045From October 22, 2024 to December 31, 20267606.92.00.00Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, of alloy 4043, 4045, 3003, 3005 or 70727607.11.00.20Aluminum foil, not backed, rolled but not further worked, with a thickness of 0.005 mm or more but less than 0.127 mm, of alloy 3003147828896047210.12.00Electrolytic tinplate of iron or non-alloy steel, batch annealed materials or box annealed materials, with a thickness of less than 0.50 mm and width of more than over 600 mmFrom October 22, 2024 to December 31, 2026Imported for sale to company with business number 10470840914.017950064287304.39.00.90Seamless steel tubes of non-alloy steel, of a circular cross-section, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 25 mm but not exceeding 30 mm, meeting specifications equivalent to CSA G40.20-13/G40.21-13 or ASTM A572From October 22, 2024 to December 31, 202614.027977996737306.30.00Steel electrical metallic tubing (EMT), galvanized, non-threaded, in 10-foot lengths, trade size of at least 1.5 inches but not exceeding 4 inchesFrom October 22, 2024 to December 31, 202614.17980450847604.21.00.90Aluminum bars, rods and profiles, hollow profiles, otherFrom October 22, 2024 to December 31, 2026158087395777607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further workedFrom October 22, 2024 to December 31, 202615.18137924627607.11.00.20Aluminum foil, not backed, rolled but not further worked, with a thickness of at least 0.005 mm but not exceeding 0.127 mm, of alloy 8079From October 22, 2024 to December 31, 2026168424742497217.10.00.43Spring wire, with a diameter of 1.0 mm or more but less than 1.5 mmFrom October 22, 2024 to December 31, 20267217.10.00.44Spring wire, with a diameter of 1.5 mm or more but less than 3 mm178582999287606.91.00Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, non-alloyed, of the 1000, 5000 or 8000 seriesFrom October 22, 2024 to December 31, 20267606.92.00Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, alloyed, of the 1000, 5000 or 8000 series7607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked, of the 1000, 5000 or 8000 series7607.19.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of the 1000, 5000 or 8000 series188610721637606.12.00.12Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or moreFrom April 1, 2025 to December 31, 2026198612064237306.50.00.00Steel tubes, circular, cold-rolled, of specification ASTM A500 gr AFrom October 22, 2024 to December 31, 20267306.61.00.39Steel tubes, rectangular, cold-rolled, of specification ASTM A500 gr A7306.69.00.39Steel tubes, oval, of specification ASTM A500 gr A208635798277607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further workedFrom October 22, 2024 to December 31, 2026218723212037606.12.00Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangularFrom October 22, 2024 to December 31, 2026228728895147228.40.00Steel bars with an outer diameters of at least 7.1 inches but not exceeding 26.6 inches, of grade 4130, of specification API 6AFrom October 22, 2024 to December 31, 2026238766863207607.11.00Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further workedFrom October 22, 2024 to December 31, 2026248820925627219.90.00#301 Full Hard Stainless Steel coil, with thickness of 0.02 inches (0.5 mm), width of 1 inch (25 mm), grounded edges, purchased in large coilsFrom October 22, 2024 to December 31, 202524.018913893897225.40.00Flat-rolled products of other alloy steel, hot-rolled, of a width of at least 600 mm, including plates and other flat-rolled formsFrom October 22, 2024 to December 31, 202624.18921834768703.40.90Non-plug-in hybrid passenger vehicles, with both a spark-ignition internal combustion piston engine and an electric motor for propulsion, with a cylinder capacity of 1000 cm³ or moreFor goods imported on or after October 1, 2024Remission limited to a maximum of 554 vehicles24.28959302877607.11.00.20Rolls of aluminum foil with a thickness ranging from 7 µm to 70 µm and a width of at least 40 inches but not exceeding 60 inchesFrom October 22, 2024 to December 31, 2026258969644007219.90.00Stainless steel sheets, of the following specifications: Grade: 430 BA Specification: ASTM A240 Thickness: of at least 0.048 inches but not exceeding 0.073 inches Width: 26.25 inches Length: at least 60 inches but not exceeding 155 inches No coating but protective SPV or PVC on one side From October 22, 2024 to July 31, 20267606.12.00Aluminum alloy sheets, rectangular, of the following specifications: Grade: 3003 H14 Specification: ASTM B209 Thickness: 0.085 inches Width: of at least 28 inches but not exceeding 34.5 inches Length: at least 60 inches but not exceeding 190 inches 268997710427606.12.00Pre-painted aluminum coil, of alloy 3003 or 3105, with a thickness of 0.012 inches, 0.017 inches, 0.0234 inches, 0.027 inches or 0.32 inchesFrom October 22, 2024 to December 31, 2026Imported for sale to company with business number 100980127 NoteIf the description in column 3 covers only a subset of goods classified under the tariff item referred to in column 2, remission is granted only for the goods described in column 3.

    Related guides, FAQ and contract templates