LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2022-140:en

    SOR-2022-140:en — Clean Fuel Regulations

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 (1) The following definitions apply in these Regulations. account holder, with respect to any account opened under section 28, means the primary supplier or registered creator for whom the Minister opened the account. (titulaire) Act means the Canadian Environmental Protection Act, 1999. (Loi) authorized agent means, (a) in respect of a corporation, any officer of the corporation who is authorized to act on its behalf; (b) in respect of an individual, that individual or any person authorized to act on behalf of that individual; and (c) in respect of any other entity, any person authorized to act on behalf of that entity. (agent autorisé) baseline carbon intensity means the weighted average carbon intensity of the gasoline or diesel used in Canada for the year 2016, as set out in subsection 5(3). (intensité en carbone de base) biogas means a gaseous mixture that is recovered from the anaerobic decomposition of biomass and that consists primarily of methane and carbon dioxide and contains other constituents that prevent it from meeting the standard for injection into the nearest natural gas pipeline. (biogaz) biomass means the biodegradable fraction of products, waste and residues of a biological origin — including plant and animal substances — originating from agriculture, forestry and other industries, such as fishing and aquaculture, as well as the fraction of waste, including industrial and municipal waste, of a biological origin. (biomasse) carbon intensity, in relation to a fuel, energy source, or material input that is renewable natural gas, biogas, renewable propane or hydrogen, means the quantity in grams of CO2e per megajoule of energy contained in that fuel, energy source or material input that is released over the life cycle of that fuel, energy source or material input, including during the activities carried out during the stages of the life cycle, such as (a) the extraction or production of the feedstock used to produce the fuel, energy source or material input; (b) the processing, refining or upgrading of the feedstock to produce the fuel, energy source or material input; (c) the transportation or distribution of the feedstock, of intermediary products or of the fuel, energy source or material input; and (d) the combustion of the fuel. (intensité en carbone) carbon-intensity contributor means a person who applies for the approval of a carbon intensity under subsection 80(1) for a set of activities carried out over the life cycle of a fuel in the liquid class or a low-carbon-intensity fuel with the intention to transfer the approved carbon intensity to a registered creator or foreign supplier or to another carbon-intensity contributor. (contributeur à l’intensité en carbone) charging-network operator means a person who operates a communication platform that collects data on the electricity supplied by a charging station and who is the owner of that data. (exploitant d’un réseau de recharge) charging-site host means a person who owns or leases a charging station and who has the legal right to have the charging station installed.  (hôte d’une station de recharge) charging station means a device that is used in Canada to charge the battery on board an electric vehicle by supplying electricity to the electric vehicle and that is capable of communicating with a server, whether through the Internet or using a cellular signal or connected vehicle communications, to report the quantity of electricity supplied and the time at which it is supplied. (borne de recharge) CO2e means the quantity of carbon dioxide, expressed in grams or tonnes, that would be required to produce a warming effect equivalent to another greenhouse gas over a particular period of time, as set out in the Fuel LCA Model. (CO2e) compliance-credit transfer system means the system administered by the Minister for the transfer of credits in accordance with sections 105 to 112.  (mécanisme de cession des unités de conformité) compliance period means (a) the period that begins on the day on which these Regulations are registered and ends on December 31, 2022; (b) the period that begins on January 1, 2023 and ends on June 30, 2023; (c) the period that begins on July 1, 2023 and ends on December 31, 2023; or (d) after December 31, 2023, each calendar year. (période de conformité) co-processed low-carbon-intensity fuel means the portion of a fuel that is produced from a mixture of a petroleum feedstock and a non-petroleum feedstock that are used simultaneously in the same processing unit of a petroleum refinery or upgrader facility and that is a low-carbon-intensity fuel derived from a non-petroleum feedstock.  (combustible cotraité à faible intensité en carbone) co-processed low-carbon-intensity propane means a co-processed low-carbon-intensity fuel that is a mixture that is gaseous at standard conditions and consists primarily of propane. (propane cotraité à faible intensité en carbone) crop includes a woody biomass crop with a rotational period that is not more than 25 years. (culture) deferred portion of the reduction requirements, with respect to a compliance period, means the portion of the sum of the reduction requirements in respect of gasoline and diesel for that compliance period that has been deferred by a primary supplier in accordance with section 16, as increased in accordance with section 17 and as reduced in accordance with section 18. (partie reportée des exigences de réduction) diesel means liquid petroleum fuel that (a) is sold or represented as diesel or as a fuel suitable for use in a diesel engine; or (b) evaporates at atmospheric pressure, has a boiling point between 130°C and 400°C and is suitable for use in a diesel engine. (diesel) diesel replacement means a liquid low-carbon-intensity fuel that is suitable for use in a diesel engine, furnace or open flame burner or that is used in aviation. (substitut du diesel) electric vehicle means a vehicle that is propelled by an electric motor whose source of electricity is a rechargeable battery that is charged from a source of electricity that is not on board the vehicle. It includes a plug-in hybrid electric vehicle. (véhicule électrique) eligible feedstock means a feedstock that is eligible under section 46 and meets the requirements set out in sections 48 to 52, except if it is exempted under any of sections 53 to 55, as well as the requirements set out in section 57.  (charge d’alimentation admissible) EPA means the United States Environmental Protection Agency.  (EPA) foreign supplier means the owner of a facility outside Canada at which a low-carbon-intensity fuel is produced or the person who leases, operates, controls or manages such a facility. (fournisseur étranger) Fuel LCA Model means the fuel life-cycle assessment model that is developed by the Minister in accordance with ISO Standard 14040 and that consists of the procedures that must be followed to determine the carbon intensity of a fuel, energy source or material input using life-cycle inventories for various pathways. (modèle ACV des combustibles) fuelling station means a facility in Canada at which vehicles are supplied with fuel or with hydrogen used as an energy source and includes a mobile facility. (station de ravitaillement) gaseous class means a class of fuel consisting of propane and natural gas. (catégorie des combustibles gazeux) gasoline means liquid petroleum fuel that (a) is sold or represented as gasoline, as a fuel suitable for use in a spark-ignition engine or as a fuel requiring only the addition of a low-carbon-intensity fuel or an oxygenate to make it suitable for use in a spark-ignition engine; or (b) is suitable for use in a spark-ignition engine and has, as determined by the applicable test method listed in National Standard of Canada CAN/CGSB-3.5-2021, entitled Automotive Gasoline, the following characteristics: (i) a vapour pressure of no less than 38 kPa, (ii) an anti-knock index of no less than 80, (iii) a distillation temperature at which 10% of the fuel has evaporated of no less than 35°C and no more than 70°C, and (iv) a distillation temperature at which 50% of the fuel has evaporated of no less than 65°C and no more than 120°C. (essence) gasoline replacement means a liquid low-carbon-intensity fuel that is suitable for use in a spark-ignition engine.  (substitut de l’essence) GPS means global positioning system. (GPS) hydrogen fuel cell vehicle means a vehicle propelled solely by an electric motor that uses electricity produced by an electrochemical cell from hydrogen. (véhicule à pile à hydrogène) ISO/IEC Standard 17011 means International Standard ISO/IEC 17011, entitled Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies, published by the International Organization for Standardization. (norme ISO/IEC 17011) ISO/IEC Standard 17021-1 means the International Standard ISO/IEC 17021-1, entitled Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements, published by the International Organization for Standardization (norme ISO/IEC 17021-1) ISO/IEC Standard 17065 means the International Standard ISO/IEC 17065, entitled Conformity assessment — Requirements for bodies certifying products, processes and services, published by the International Organization for Standardization. (norme ISO/IEC 17065) ISO Standard 14040 means the International Standard ISO 14040, entitled Environmental management — Life cycle assessment — Principles and framework, published by the International Organization for Standardization. (norme ISO 14040) ISO Standard 14044 means the International Standard ISO 14044, entitled Environmental management — Life cycle assessment — Requirements and guidelines, published by the International Organization for Standardization. (norme ISO 14044) ISO Standard 14064-2 means the International Standard ISO 14064-2, entitled Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements, published by the International Organization for Standardization. (norme ISO 14064-2) ISO Standard 14064-3:2019 means the International Standard ISO 14064-3:2019, entitled Greenhouse gases — Part 3: Specification with guidance for the verification and validation of greenhouse gas statements, published by the International Organization for Standardization, as it read on May 1, 2019. (norme ISO 14064-3:2019) ISO Standard 19011 means the International Standard ISO 19011, entitled Guidelines for auditing management systems, published by the International Organization for Standardization. (norme ISO 19011) liquid class means a class of fuel consisting of the fossil fuels that are liquid at standard conditions.  (catégorie des combustibles liquides) low-carbon-intensity fuel means a liquid or gaseous fuel that is not a fuel in the liquid class or gaseous class and that has a carbon intensity, for the compliance period during which the fuel was produced or imported, that does not exceed (a) 90% of the reference carbon intensity set out for that compliance period in item 1, column 2, of Schedule 1, in the case of a fuel that is in the liquid state at standard conditions; (b) the reference carbon intensity set out for that compliance period in item 2, column 2, of Schedule 1, in the case of compressed renewable natural gas and liquefied renewable natural gas referred to in subsection 99(1), renewable natural gas referred to in subsection 100(1) or hydrogen referred to in paragraph 104(1)(b); (c) the reference carbon intensity set out for that compliance period in item 3, column 2, of Schedule 1, in the case of renewable propane referred to in subsection 99(1) or 100(1) and co-processed low-carbon-intensity propane referred to in subsection 99(1); (d) 90% of the reference carbon intensity set out for that compliance period in item 2, column 2, of Schedule 1, in the case of biogas or in the case of renewable natural gas and hydrogen that is not referred to in paragraph (b); or (e) 90% of the reference carbon intensity set out for that compliance period in item 3, column 2, of Schedule 1, in the case of renewable propane and co-processed low-carbon-intensity propane that is not referred to in paragraph (c). (combustible à faible intensité en carbone) marine vessel means any boat, ship or other vessel that is designed, used or capable of being used for navigation in, on or through water but is not designed for self-propulsion out of water. (navire) Methods for Verification and Certification means the document entitled Methods for Verification and Certification — Clean Fuel Regulations that is developed and published by the Minister. (Méthodes de vérification et de certification) misstatement means an error, ommission or misreporting, as defined in Methods for Verification and Certification, in an application or report referred to in these Regulations.  (déclaration erronée) participant means a primary supplier who is registered with the Minister in accordance with subsection 10(1) or a registered creator who participates in the compliance-credit transfer system. (participant) petroleum feedstock means crude oil or a substance derived from crude oil or natural gas, if it is primarily used as a feedstock to produce a fossil fuel in a petroleum refinery or upgrader facility, but it does not include any feedstock that is derived from petrochemicals or other hydrocarbon streams that have undergone additional processing, such as gas-to-liquid processing. (charge d’alimentation à base de pétrole) primary supplier means a person who (a) owns, leases, operates, controls or manages a fuel production facility in Canada at which gasoline or diesel is produced; or (b) imports gasoline or diesel into Canada. (fournisseur principal) provisional compliance credit means a compliance credit referred to in subsection 23(1). (unité de conformité provisoire) reduction requirement means the reduction requirement determined in accordance with section 9. (exigence de réduction) registered creator means a person registered with the Minister in accordance with subsection 25(1). (créateur enregistré) renewable natural gas means gas that meets the standard for injection into the closest natural gas pipeline and that is either synthetic natural gas derived from biomass or gas derived from the processing of biogas. (gaz naturel renouvelable) renewable propane means a mixture that is gaseous at standard conditions, is recovered from the processing of biomass and consists primarily of propane, but it does not include co-processed low-carbon-intensity propane. (propane renouvelable) residue means a substance that is produced in a production process but whose production is not a primary aim of the process. It does not include any substance that the process has been deliberately modified to produce. (résidu) scheme owner has the same meaning as in subclause 3.11 of ISO/IEC Standard 17065. (propriétaire du régime) Specifications for Fuel LCA Model CI Calculations means the specifications that are developed and published by the Minister in respect of the calculation of the carbon intensity of a fuel, energy source or material input using the Fuel LCA Model. (spécifications pour le calcul de l’IC au moyen du modèle ACV des combustibles) standard conditions means a temperature of 15°C (59°F) and a pressure of 101.325 kPa (14.696 psia). (conditions normales) total reduction requirement means the sum of the reduction requirements in respect of gasoline and diesel for the compliance period that ended most recently, and the deferred portion of the reduction requirements for each preceding compliance period. (exigence de réduction totale) verification body means a verification body referred to in section 137.  (organisme de vérification) (2) For the purposes of these Regulations, hydrogen referred to in paragraph 104(1)(a) is deemed to be a low-carbon-intensity fuel if the carbon intensity of the hydrogen, for the compliance period during which the hydrogen is used, does not exceed the reference carbon intensity set out for that compliance period in item 2, column 2, of Schedule 1. (3) In these Regulations, (a) a reference to hydrogen includes compressed hydrogen and liquefied hydrogen; (b) a reference to natural gas includes compressed natural gas and liquefied natural gas; and (c) a reference to renewable natural gas includes compressed renewable natural gas and liquefied renewable natural gas. (4) The following provisions do not apply in respect of a co-processed low-carbon-intensity fuel: (a) paragraphs 19(1)(b) and (c); (b) paragraphs 20(b) and (c); (c) paragraphs 57(1)(b) and (2)(d); (d) subsection 59(2); (e) section 75; (f) section 76; (g) subsection 86(2) and (8); (h) section 91; (i) section 94; (j) section 95; (k) subsection 97(2); (l) section 100; (m) section 108; (n) section 123; (o) sections 5 and 6 of Schedule 3; and (p) sections 1 to 6 of Schedule 14; and (q) section 8 of Schedule 15. 2 (1) A standard or method that is incorporated by reference in these Regulations, other than ISO Standard 14064-3:2019, is incorporated as amended from time to time. (2) For the purpose of interpreting any document that is incorporated by reference in these Regulations, a reference to “should” in the English version of the document is to be read as “must” and any recommendation or suggestion is to be read as an obligation unless the context requires otherwise. For greater certainty, in the case of the accuracy or precision of a measurement, the context never requires otherwise. (3) In the event of an inconsistency between a provision in a document incorporated by reference into these Regulations and any provision of these Regulations, the provision of these Regulations prevails to the extent of the inconsistency. 3 Unless otherwise specified, a reference in these Regulations to a volume or quantity of gas or liquid that is expressed in cubic metres is a reference to the volume or quantity of that gas or liquid at standard conditions. 4 (1) A primary supplier who produces in Canada or imports into Canada a volume of less than 400 m3 of gasoline or a volume of less than 400 m3 of diesel during a compliance period is exempt from the application of these Regulations with respect to that fuel for that compliance period. (2) These Regulations do not apply in respect of gasoline or diesel that is (a) aviation gasoline; (b) exported from Canada; (c) used for scientific research, other than research on consumer preferences in respect of various properties of fuels or market research; or (d) sold or delivered for the purpose of supplying the engine of a vehicle, including a marine vessel, that is used exclusively for competition. (3) However, a primary supplier who, during a compliance period, produces in Canada or imports into Canada a volume of 400 m3 or more of gasoline or diesel must record the volume of every fuel referred to in paragraphs (2)(a) to (d) that is produced or imported during that compliance period and must include that information in the compliance report submitted to the Minister under section 127. (4) For greater certainty, the fuels referred to in paragraphs (2)(a) to (d) are not included when determining, for the purposes of subsection (1), the volume of fuel that is produced in Canada or imported into Canada by a primary supplier. 5 (1) For the purposes of section 139 of the Act, a primary supplier’s pool — as determined in accordance with section 8 — of a liquid fossil fuel that is set out in column 1 of the table to this subsection must not have a carbon intensity that is greater than the corresponding limit set out in column 2 for the corresponding compliance period. (2) A primary supplier must comply with subsection (1) with respect to a fuel for a compliance period by lowering the carbon intensity of their pool of that fuel for that compliance period by an amount that is equal to the difference between the baseline carbon intensity for that fuel and the limit set out in the table to subsection (1) for that fuel and that compliance period. The carbon intensity must be lowered by using compliance credits in accordance with section 11 to satisfy the reduction requirement for that compliance period. (3) For the purposes of subsection (2), the baseline carbon intensity of gasoline is 95 gCO2e/MJ and the baseline carbon intensity of diesel is 93 gCO2e/MJ. (4) Subsection (1) does not apply in respect of a fuel that is produced in Canada or imported into Canada before July 1, 2023. 6 (1) For the purposes of section 139 of the Act, at least 5% of the volume of a primary supplier’s pool of gasoline — as determined in accordance with section 8 — must, for each compliance period, be displaced by an equivalent volume of a gasoline replacement. (2) For the purposes of subsection (1), the primary supplier may, for a compliance period, subtract from their pool of gasoline determined in accordance with section 8 any volume of gasoline that, during the compliance period, the primary supplier produced in or imported into Newfoundland and Labrador and sold or delivered for use in that province, if the primary supplier records information that establishes that the volume of gasoline met those conditions. (3) Subsection (1) does not apply in respect of gasoline that is produced in Canada or imported into Canada before July 1, 2023. 7 (1) For the purposes of section 139 of the Act, at least 2% of the volume of a primary supplier’s pool of diesel — as determined in accordance with section 8 — must, for each compliance period, be displaced by an equivalent volume of a diesel replacement. (2) For the purposes of subsection (1), the primary supplier may, for a compliance period, subtract from their pool of diesel determined in accordance with section 8 any volume of diesel that, during the compliance period, the primary supplier produced in or imported into Newfoundland and Labrador and sold or delivered for use in that province, if the primary supplier records information that establishes that the volume of diesel met those conditions. (3) Subsection (1) does not apply in respect of diesel that is produced in Canada or imported into Canada before July 1, 2023. 8 (1) A primary supplier must, for each compliance period, determine the total volume, expressed in cubic metres, of their pool of gasoline or diesel, as the case may be, that was (a) produced by the primary supplier at a fuel production facility in Canada and, during the compliance period, either (i) dispatched from the fuel production facility, or (ii) used to fuel a vehicle or other mobile equipment at the fuel production facility; or (b) imported by the primary supplier into Canada during the compliance period. (2) However, a primary supplier may, for each compliance period, subtract from their pool of gasoline or diesel, as the case may be, any volume of that fuel, if the primary supplier, before the August 1 of the calendar year that follows the end of the compliance period, records information that establishes that the volume of fuel met any of the following conditions during the compliance period: (a) it was sold or delivered for a use other than combustion; (b) it was sold or delivered for use in a marine vessel that had a non-Canadian port as its destination; (c) it was sold or delivered for use for non-industrial purposes in a geographic area that is served by neither an electrical distribution network that is subject to the standards of the North American Electric Reliability Corporation nor a natural gas distribution system; (d) it was sold or delivered for the purpose of space heating; (e) it was sold or delivered for use in the generation of electricity in a geographic area that is served by neither an electrical distribution network that is subject to the standards of the North American Electric Reliability Corporation nor a natural gas distribution system. 9 The carbon intensity of a pool of gasoline or diesel for a compliance period is considered to be lowered for the purposes of subsection 5(2) if the number of tonnes of CO2e released over the life cycle of that fuel is reduced by the value of the reduction requirement for that compliance period, as determined by the formula is the difference, expressed in gCO2e/MJ, between the baseline carbon intensity of that fuel, as set out in subsection 5(3), and the limit for that fuel for that compliance period, as set out in column 2 of the table to subsection 5(1); is the volume of that pool for the compliance period, as determined in accordance with section 8 and expressed in cubic metres; and is, at the election of the primary supplier, the energy density of the fuel as set out in column 2 of Schedule 2 or as set out in the Specifications for Fuel LCA Model CI Calculations. 10 (1) A primary supplier must register with the Minister by submitting a registration report to the Minister that contains the information referred to in sections 1 to 3 of Schedule 3 no later than 45 days after the day on which they have produced in Canada or imported into Canada, during a compliance period, a total volume of 400 m3 or more of gasoline or a total volume of 400 m3 or more of diesel. (2) However, the registration report may be submitted at any time during the period that begins on the day on which these Regulations are registered and ends 90 days after that day. (3) If there are any changes in the information referred to in section 1 of Schedule 3 that is provided in the registration report, the primary supplier must send a notice to the Minister that provides the updated information within 30 days after the day on which the change occurs. (4) A primary supplier who is not required by subsection (1) to be registered for a given compliance period and who has complied with the requirements set out in these Regulations for all of the previous compliance periods, including the volumetric requirements set out in subsections 6(1) and 7(1) and the reduction requirement, may cancel their registration as a primary supplier by sending a notice to that effect to the Minister. (5) If, after receiving the notice referred to in subsection (4), the Minister is satisfied that the primary supplier has complied with these Regulations for all previous compliance periods, the Minister must (a) if the primary supplier is not a registered creator, cancel any compliance credits in their accounts opened under section 28; (b) cancel their registration as a primary supplier; and (c) send a notice to the primary supplier informing them that their registration has been cancelled. (6) For greater certainty, subsection (1) applies to a primary supplier whose registration was cancelled by the Minister under subsection (5). 11 (1) A primary supplier must use the compliance credits that they create under sections 19 and 20, or that are transferred to them under the compliance-credit transfer system, to satisfy the total reduction requirement. (2) The use of one compliance credit by a primary supplier for gasoline or diesel that is produced in Canada or imported into Canada during a compliance period is deemed to reduce by one tonne the quantity of CO2e released over the life cycle of that fuel during that compliance period. (3) The primary supplier must use only the compliance credits that are created as provisional compliance credits before the end of a compliance period or the compliance credits that they create under subsection 19(2) to satisfy the reduction requirement for that compliance period. (4) The Minister must cancel a compliance credit immediately after it is used. 12 (1) For the purposes of subsection 6(1), a compliance credit that was created under paragraph 19(1)(a), (b) or (c) by producing in Canada or importing into Canada a volume of a gasoline replacement, and that is used by a primary supplier in accordance with section 11 for a compliance period, is deemed to displace, for that compliance period, the use of an equivalent volume of the primary supplier’s pool of gasoline. (2) For the purposes of subsection 7(1), a compliance credit that was created under paragraph 19(1)(a), (b) or (c) by producing in Canada or importing into Canada a volume of a diesel replacement, and that was used by a primary supplier in accordance with section 11 for a compliance period, is deemed to displace, for that compliance period, the use of an equivalent volume of the primary supplier’s pool of diesel. (3) The primary supplier must use only the compliance credits that are created as provisional compliance credits before the end of a compliance period to comply with the volumetric requirements set out in subsections 6(1) and 7(1) for that compliance period. 13 (1) For the purposes of subsection 12(1), a primary supplier must, no later than the July 31 that follows the end of a compliance period, use — in accordance with subsection 12(3) — the compliance credits that are in their account opened under paragraph 28(a), until (a) the volumetric requirement set out in subsection 6(1) is met for that compliance period; or (b) no such compliance credits remain in that account. (2) For the purposes of subsection 12(2), a primary supplier must, no later than the July 31 that follows the end of a compliance period, use — in accordance with subsection 12(3) — the compliance credits that are in their account opened under paragraph 28(a), until (a) the volumetric requirement set out in subsection 7(1) is met for that compliance period; or (b) no such compliance credits remain in that account. (3) For the purposes of section 11 and subject to subsection 15(1), a primary supplier must, no later than the July 31 that follows the end of a compliance period, use all of the compliance credits that they created by contributing to a registered emission-reduction funding program in accordance with paragraph 118(1)(a) to satisfy the reduction requirement for that compliance period. (4) For the purposes of section 11 and subject to subsections 15(2) and (3), a primary supplier must, no later than the July 31 that follows the end of a compliance period, use the compliance credits that are in their accounts opened under section 28, until (a) the reduction requirement is satisfied for that compliance period; or (b) no such compliance credits remain in those accounts. (5) Subject to subsections (1) and (2), if the circumstances described in paragraph (4)(a) occur before the circumstances described in paragraph (4)(b), the primary supplier must satisfy the reduction requirement by using compliance credits that are chosen by them and indicated in the report submitted under subsection 127(1). (6) On the August 1 that follows the end of a compliance period, if any of the compliance credits referred to in subsection (3) have not been used by the primary supplier, the Minister must cancel those credits. (7) Subsections (1) to (4) do not apply in respect of any compliance period that ends before July 1, 2023. 14 (1) For the purposes of subsection 12(1), if a primary supplier, on the August 1 that follows the end of a compliance period, has not complied with the volumetric requirement set out in subsection 6(1) for that compliance period, the primary supplier must, no later than the following December 15, comply with that requirement by using the compliance credits transferred to them under section 112. (2) For the purposes of subsection 12(2), if a primary supplier, on the August 1 that follows the end of a compliance period, has not complied with the volumetric requirement set out in subsection 7(1) for that compliance period, the primary supplier must, no later than the following December 15, comply with that requirement by using the compliance credits transferred to them under section 112. (3) For the purposes of section 11 and subject to subsection 15(1), if a primary supplier, on the August 1 that follows the end of a compliance period, has not satisfied the reduction requirement for that compliance period, the primary supplier must, no later than the December 15 that follows the end of that compliance period, use the compliance credits that were transferred to them under section 112, or that they created by contributing to a registered emission-reduction funding program in accordance with paragraph 118(1)(b), to satisfy that reduction requirement. (4) Subject to sections 16 to 18, a primary supplier must, no later than the December 15 that follows the end of a compliance period, use the compliance credits in their accounts opened under section 28 to satisfy the total reduction requirement and comply with the volumetric requirements set out in subsections 6(1) and 7(1) for that compliance period. (5) On the December 16 that follows the expiry of a compliance period, if any of the compliance credits that are referred to in subsection (3) have not been used by the primary supplier, the Minister must cancel those credits. (6) Subsections (1) to (4) do not apply in respect of any compliance period that ends before July 1, 2023. 15 (1) The primary supplier must ensure that the total number of compliance credits created under subsection 19(2) — that are used in accordance with subsections 13(3) and 14(3), paragraph 18(1)(a) and subsection 18(3) during the calendar year that follows the end of a compliance period — does not exceed 10% of the primary supplier’s total reduction requirement. (2) The primary supplier must ensure that the total number of compliance credits in their account opened under paragraph 28(b) — that are used in accordance with subsection 13(4) and paragraph 18(1)(b) during the calendar year that follows the end of a compliance period — does not exceed 10% of the primary supplier’s total reduction requirement. (3) The primary supplier must ensure that the total number of compliance credits created under paragraph 19(1)(a) in respect of a project for which a generic emission-reduction quantification method is applicable — that are used in accordance with subsection 13(4) and paragraphs 18(1)(b) and (c) during the calendar year that follows the end of a compliance period — does not exceed 10% of the primary supplier’s total reduction requirement. 16 (1) A primary supplier may, no later than the December 15 that follows the end of a compliance period, defer satisfaction of their reduction requirements for that compliance period by any number of compliance credits that does not exceed the greater of zero and the result of the formula is the sum of their reduction requirements in respect of gasoline and diesel for that compliance period; and is the sum of all deferred portions of the reduction requirements in respect of gasoline and diesel for previous compliance periods. (2) The primary supplier may defer a portion of their reduction requirements for a compliance period under subsection (1) only if (a) the Minister has sent a notice in accordance with subsection 111(2) for that compliance period or the primary supplier has acquired by transfer through the compliance-credit clearance mechanism the number of compliance credits determined in accordance with paragraph 112(5)(b) for that compliance period; and (b) the primary supplier has created enough compliance credits by contributing to a registered emission-reduction funding program to satisfy 10% of the total reduction requirement for that compliance period in respect of all types of fuels. (3) A primary supplier who defers under subsection (1) a portion of their reduction requirements for a compliance period must satisfy the deferred portion no later than the December 15 that follows the fifth anniversary of the end of that compliance period. 17 On each December 16 that follows the end of a compliance period for which a portion of the reduction requirements is deferred under subsection 16(1) and that precedes the fifth anniversary of the end of that compliance period, the deferred portion of the reduction requirements is to be multiplied by 1.05. 18 (1) In order to reduce a deferred portion of the reduction requirements in accordance with section 11, the primary supplier must, during the period that begins on the day after a compliance period expires and ends on the July 31 that follows that day, use the following compliance credits that are in their accounts opened under section 28 and that exceed the number required to satisfy the reduction requirements for the compliance period that ended most recently: (a) subject to subsection 15(1), all of the compliance credits that they created by contributing to a registered emission-reduction funding program in accordance with paragraph 118(1)(a); (b) subject to subsections 15(2) and (3), any compliance credits in their account opened under paragraph 28(b); and (c) subject to subsection 15(3), any compliance credits in their account opened under paragraph 28(a). (2) If the primary supplier has more credits than the number required to satisfy the deferred portion of the reduction requirements in accordance with subsection (1), they may elect to use any number of compliance credits referred to in paragraphs (1)(b) and (c) to satisfy the deferred portion of the reduction requirements. (3) Subject to subsection 15(1), if a primary supplier, on the August 1 that follows the end of a compliance period, has not satisfied the deferred portion of the reduction requirements for a previous compliance period in accordance with subsection (2), the primary supplier must, no later than the following December 15, reduce the deferred portion of the reduction requirements by using all of the compliance credits in their account opened under paragraph 28(a) — that were transferred to them through the compliance-credit clearance mechanism under section 112 or that they created by contributing to a registered emission-reduction funding program in accordance with paragraph 118(1)(b) — that exceed the number of compliance credits required to satisfy their reduction requirements for the compliance period that ended most recently. (4) If a primary supplier has not satisfied the deferred portion of the reduction requirements for more than one previous compliance period, they must not use any compliance credits to reduce the deferred portion of the reduction requirements in accordance with subsection (1) or (3) for a particular compliance period unless they have satisfied the deferred portion of the reduction requirements for every compliance period that precedes that particular compliance period. (5) Subsections (1) to (4) do not apply before January 1, 2025. 19 (1) A registered creator may create a compliance credit in respect of the liquid class in the following cases: (a) the registered creator, or a person with whom they have entered into an agreement under section 21, lowers the carbon intensity of a fuel in the liquid class by carrying out, in respect of that fuel, a CO2e-emission-reduction project that is described in section 30 and that is recognized under subsection 35(1), 36(1), 37(3), 39(1) or 40(3), as the case may be; (b) the registered creator imports into Canada a quantity of low-carbon-intensity fuel to which may be attributed a reduction in the number of tonnes of CO2e that would otherwise have been emitted by the use of a fuel in the liquid class, if the low-carbon-intensity fuel (i) is in the liquid state at standard conditions, (ii) is one referred to in section 94, (iii) is used or sold for use as a fuel in Canada whether as neat fuel or as part of a blend, and (iv) meets the requirements set out in section 56; (c) the registered creator, or a person with whom they have entered into an agreement under section 21, produces in Canada a quantity of low-carbon-intensity fuel to which may be attributed a reduction in the number of tonnes of CO2e that would otherwise have been emitted by the use of a fuel in the liquid class, if the low-carbon-intensity fuel (i) is in the liquid state at standard conditions, (ii) is one referred to in section 94, (iii) is used or sold for use as a fuel in Canada whether as neat fuel or as part of a blend, and (iv) meets the requirements set out in section 56; or (d) the registered creator, or a person with whom they have entered into an agreement under section 21, reduces the number of tonnes of CO2e emissions by displacing the use in Canada of a quantity of fuel in the liquid class as a fuel for a vehicle with the use in Canada of (i) a quantity of propane, compressed natural gas or liquefied natural gas as a fuel for a vehicle, in accordance with section 98, (ii) a quantity of renewable propane, co-processed low-carbon-intensity propane, compressed renewable natural gas or liquefied renewable natural gas that meets the requirements set out in section 56 as a fuel for a vehicle, in accordance with section 99, (iii) a quantity of renewable propane or renewable natural gas that meets the requirements set out in section 56 as a fuel for a vehicle, in accordance with section 100, (iv) a quantity of electricity as an energy source for an electric vehicle, in accordance with sections 101 and 102, or (v) a quantity of hydrogen that meets the requirements set out in section 56, in accordance with section 104, (A) as an energy source for a hydrogen fuel cell vehicle, or (B) as a fuel for a vehicle other than a hydrogen fuel cell vehicle. (2) A primary supplier may create a compliance credit in respect of the liquid class if they make a contribution to a registered emission-reduction funding program in accordance with section 118. 20 A registered creator may create a compliance credit in respect of the gaseous class in the following cases: (a) the registered creator, or a person with whom they have entered into an agreement under section 21, lowers the carbon intensity of a fuel in the gaseous class by carrying out, in respect of that fuel, a CO2e-emission-reduction project described in paragraph 30(d) that reduces the carbon intensity of a fuel in the liquid class and is recognized under subsection 36(1), 37(3), 39(1) or 40(3), as the case may be; (b) the registered creator imports into Canada a quantity of low-carbon-intensity fuel to which may be attributed a reduction in the number of tonnes of CO2e that would otherwise have been emitted by the use of a fuel in the gaseous class, if the low-carbon-intensity fuel (i) is biogas, renewable natural gas, renewable propane or hydrogen, (ii) is one referred to in section 95, (iii) is used or sold for use as a fuel in Canada whether as neat fuel or as part of a blend, and (iv) meets the requirements set out in section 56; or (c) the registered creator, or a person with whom they have entered into an agreement under section 21, produces in Canada a quantity of low-carbon-intensity fuel to which may be attributed a reduction in the number of tonnes of CO2e that would otherwise have been emitted by the use of a fuel in the gaseous class, if the low-carbon-intensity fuel (i) is biogas, renewable natural gas, renewable propane or hydrogen, (ii) is one referred to in section 95 or 96, as the case may be, (iii) is used or sold for use as a fuel in Canada whether as neat fuel or as part of a blend, and (iv) meets the requirements set out in section 56. 21 (1) A registered creator may, before they have created any provisional compliance credits, enter into an agreement to create compliance credits for a compliance period (a) with a person who is carrying out a CO2e-emission-reduction project described in section 30 or a person who is referred to in subsection 98(1), 99(1), 101(1), 102(1) or 104(1); or (b) with a producer who is referred to in subsection 94(1), 95(1), 96(1) or 100(1), if the agreement applies only to the creation of compliance credits through the production of a quantity of low-carbon-intensity fuel in Canada. (2) The agreement is not valid unless it is signed by the authorized agents of each of the parties to the agreement and contains the following information: (a) with respect to each party to the agreement, (i) their name, civic address, postal address, telephone number and, if any, email address, (ii) the name, title, civic address, postal address, telephone number and, if any, email address of their authorized agent, and (iii) the name, title, civic address, postal address, telephone number and, if any, email address of a contact person, unless the contact person is the authorized agent; (b) an indication of the compliance period to which the agreement relates; (c) if the agreement relates to a CO2e-emission-reduction project described in section 30, (i) the name of the facility at which the project is carried out or, if the equipment with which it is carried out is not within a facility, the name of that equipment, (ii) the GPS coordinates to the fifth decimal place and, if any, civic address of that facility or equipment, and (iii) an indication of the type of co-processed low-carbon-intensity fuel produced at the facility, if applicable; (d) if the agreement relates to the production of the fuel referred to in subsection 94(1), 95(1), 96(1) or 100(1) in a facility, with respect to each facility where the fuel is produced, (i) the name, GPS coordinates to the fifth decimal place and, if any, civic address of that facility, and (ii) an indication of the type of fuel produced at the facility; (e) if the agreement relates to the supply of a fuel referred to in subsection 98(1) or 99(1) at fuelling stations, with respect to each fuelling station, (i) the name, GPS coordinates to the fifth decimal place and, if any, civic address of the fuelling station, and (ii) an indication of the type of fuel supplied by the fuelling station; (f) if the agreement is with a charging-network operator referred to in subsection 102(1), with respect to each charging station in the charging-network operator’s network, (i) an indication of the province in which it is located, and (ii) an indication of whether it is intended primarily for use by the occupants of a private dwelling-place, for use by the public or for another use; (g) if the agreement is with a charging-site host referred to in subsection 101(1), with respect to each charging station that the charging-site host owns or leases, (i) an indication of the province in which it is located, and (ii) the name of the charging-network operator, if any, who operates the communication platform that collects data from the charging station; and (h) if the agreement is with an owner or operator referred to in subsection 104(1) of one or more hydrogen fuelling stations, the name, GPS coordinates to the fifth decimal place and, if any, civic address of each fuelling station. 22 (1) A registered creator who enters into an agreement referred to in section 21 must submit the agreement to the Minister and, subject to subsection (2), must not create provisional compliance credits under the agreement until the day after the day on which it is submitted. (2) If the agreement is submitted to the Minister during the first 60 days of the compliance period to which the agreement relates, the registered creator may create provisional compliance credits under the agreement as of the first day of that compliance period unless the agreement provides for a later date. 23 (1) Any compliance credit created under subsection 19(1) or section 20 is considered to be a provisional compliance credit at the time that it is created. (2) A primary supplier must not use a provisional compliance credit to satisfy a total reduction requirement or to comply with any of the volumetric requirements set out in subsections 6(1) and 7(1) and must not transfer a provisional compliance credit under the compliance-credit transfer system. (3) A quantity of a fuel or an energy source that has been used by a person to create provisional compliance credits under subsection 94(1), 95(1), 96(1), 98(1), 99(1), 100(1), 101(1), 102(1) or 104(1) must not be used by another person to create compliance credits under the same subsection, and any quantity that is used more than once under the same subsection is deemed not to create any provisional compliance credits. (4) A provisional compliance credit that is the subject of a credit-creation report submitted under section 120 or 121 ceases to be provisional when the Minister deposits it into a compliance-credit account under subsection 24(1) or (2). (5) On creation, a provisional compliance credit is owned by the registered creator who created it. (6) At any given time, a provisional compliance credit may only have a single owner. 24 (1) The compliance credits that are the subject of a credit-creation report submitted under section 120 or 121 must be deposited by the Minister as soon as feasible after the reception of the report into the registered creator’s account that was opened under (a) paragraph 28(a), in the case of a compliance credit created under subsection 19(1); and (b) paragraph 28(b), in the case of a compliance credit created under section 20. (2) The compliance credits created under section 88, 89 or 90 that are the subject of a credit-creation report submitted under section 120 or a credit-adjustment report submitted under section 122 must be deposited by the Minister as soon as feasible after the reception of the report into any of the registered creator’s compliance-credit accounts opened under section 28. (3) The Minister must assign an identification number to each compliance credit when it is deposited into a compliance-credit account. 25 (1) A person who wishes to create compliance credits under subsection 19(1) or section 20 or under an agreement referred to in section 21 may register with the Minister as a registered creator by submitting to the Minister a registration report containing the information referred to in section 1 of Schedule 3 and any applicable information referred to in sections 4 to 12 of that Schedule. (2) A registered creator must not create provisional compliance credits under subsection 19(1) or section 20 until the day after the day on which they become a registered creator. (3) However, a person who submits a registration report to the Minister during the period that begins on the day on which these Regulations are registered and ends 60 days after that day may create provisional compliance credits as of that day. 26 (1) If there are any changes in the information referred to in section 1 of Schedule 3 that is provided in the registration report, the registered creator must send a notice to the Minister that provides the updated information within 30 days after the day on which the change occurs. (2) If there are any changes in the information referred to in sections 4 to 12 of Schedule 3 that is provided in the registration report, the registered creator must send a notice to the Minister that provides the updated information no later than on the next day on which they are required to submit a report under subsection 120(1) or 121(1). (3) A registered creator who enters into an agreement under section 21 must send a notice to the Minister that contains, in respect of the activities carried out by the person with whom they have entered into the agreement, the information referred to in section 1 of Schedule 3 and any applicable information referred to in sections 4 to 12 of that Schedule. 27 (1) A registered creator may cancel their registration as a registered creator if they (a) send to the Minister a notice that indicates their intention to cancel their registration; and (b) submit to the Minister any report or send any notice that they are required by these Regulations to submit or send. (2) If, after receiving the notice referred to in paragraph (1)(a), the Minister is satisfied that the registered creator has complied with these Regulations, the Minister must (a) in the case of a registered creator who is not a primary supplier, cancel any compliance credits in any of the registered creator’s accounts opened under section 28; (b) cancel the registered creator’s registration as a registered creator; and (c) send a notice to the registered creator informing them that their registration is cancelled. 28 On the registration of a primary supplier under subsection 10(1) or a registered creator under subsection 25(1), the Minister must open the following accounts for the primary supplier or the registered creator in the compliance-credit transfer system: (a) a liquid-fuel-compliance-credit account; and (b) a gaseous-fuel-compliance-credit account. 29 A compliance credit that is deposited into an account must remain in that account until the compliance credit is cancelled or transferred. 30 A CO2e-emission-reduction project must consist of a series of activities that, when carried out, result in (a) a reduction of the number of tonnes of CO2e emissions that are released during the activities carried out over the life cycle of a fossil fuel in the liquid state at standard conditions, including all emissions associated with the extraction of the hydrocarbons used to produce the fuel, with the processing, refining or upgrading of those hydrocarbons to produce the fuel, with the transportation or distribution of those hydrocarbons or the fuel and with the combustion of the fuel; (b) the sequestration of any CO2e emissions that are released during the activities carried out over the life cycle of a fossil fuel in the liquid state at standard conditions, including all emissions associated with the extraction of the hydrocarbons used to produce the fuel, with the processing, refining or upgrading of those hydrocarbons to produce the fuel, with the transportation or distribution of those hydrocarbons or the fuel and with the combustion of the fuel; (c) the use of any CO2e emissions that are released during the activities carried out over the life cycle of a fossil fuel in the liquid state at standard conditions, including all emissions associated with the extraction of the hydrocarbons used to produce the fuel, with processing, refining or upgrading those hydrocarbons to produce the fuel, with the transportation or distribution of those hydrocarbons or the fuel and with the combustion of the fuel; or (d) the production of a quantity of co-processed low-carbon-intensity fuel to which may be attributed a reduction in the number of tonnes of CO2e that would otherwise have been emitted by the use of a fuel in the liquid class or gaseous class, if the co-processed low-carbon-intensity fuel (i) is used or sold for use as a fuel in Canada whether as neat fuel or as part of a blend, and (ii) meets the requirements set out in section 56. 31 (1) The Minister may establish a generic emission-reduction quantification method that is applicable to any project for which no specific emission-reduction quantification method is applicable on the day on which the project is recognized under subsection 35(1) or 39(1). (2) The generic emission-reduction quantification method must (a) be consistent with ISO Standard 14064-2; (b) establish a period of 10 years, beginning on the later of the day on which the Minister recognizes a project to which it is applicable and any preferred day referred to in paragraph 34(2)(b), at the end of which the carrying out of the project ceases to create compliance credits; and (c) indicate that it is applicable to projects carried out in Canada or indicate that it is applicable to projects carried out in a specified foreign country or subdivision of a foreign country that has an agreement with Canada referred to in paragraph 39(1)(b). 32 (1) The Minister may establish a specific emission-reduction quantification method that is applicable to a project of a specific type. (2) The specific emission-reduction quantification method must (a) be consistent with ISO Standard 14064-2; (b) be based on data that are verifiable for a specified period (c) be based on emission factors that are considered by generally recognized scientific sources (i) to be appropriate for the quantification of the reduction, sequestration or use of CO2e emissions for the project, and (ii) to not result in an overestimate of that quantification; (d) establish a period of no less than 10 years, beginning on the later of the day on which the Minister recognizes the project and any preferred day referred to in paragraph 34(2)(b), at the end of which the carrying out of the project ceases to create compliance credits; (e) identify the data that are necessary to determine the number of compliance credits created under paragraph 19(1)(a) or 20(a) by the carrying out of the project for a specified period; and (f) indicate that it is applicable to projects carried out in Canada or indicate that it is applicable to projects carried out in a specified foreign country or subdivision of a foreign country that has an agreement with Canada referred to in paragraph 39(1)(b). 33 Despite sections 31 and 32, no emission-reduction quantification method is applicable to, and no compliance credits are created under paragraph 19(1)(a) or 20(a) by any of the following types of projects: (a) projects that include an operational or physical change that is solely for the purpose of reducing the production of fuel; (b) projects that are maintenance activities; (c) projects that include a reduction in the number of tonnes of CO2e emissions by displacing the use of a type of crude oil processed by a facility with the use of another type of crude oil; (d) projects that consist of current practices that would be carried out in the ordinary course of business; (e) projects that include a reduction in the number of tonnes of CO2e emissions that are released during the extraction of the hydrocarbons used to produce a fuel, during the processing, refining or upgrading of those hydrocarbons to produce the fuel, during the transportation or distribution of those hydrocarbons or the fuel and during the combustion of the fuel by displacing the use of that fuel with the use of fuel, hydrogen or electricity for which compliance credits may be created under any of sections 94, 96, 98 to 102 and 104. 34 (1) A registered creator may apply to the Minister for the recognition of a CO2e-emission-reduction project described in section 30 as a project that may create compliance credits when carried out in Canada. (2) The application must be signed by the authorized agent of the registered creator and contain (a) the information referred to in Schedule 4; (b) if the registered creator prefers that the carrying out of the project may create provisional compliance credits only as of a particular day, which must be no later than 18 months after the day on which the application is made, an indication of that preferred day; and (c) an indication that the registered creator is applying to use a generic emission-reduction quantification method or a specific emission-reduction quantification method, whichever is applicable to the project, and the name of that method. 35 (1) In the case of an application under subsection 34(1) for the recognition of a CO2e-emission-reduction project and the use of a generic emission-reduction quantification method that is applicable to the project, the Minister must recognize the project as a project that may create compliance credits when carried out if the Minister is satisfied, based on the information provided by the registered creator, that (a) the activities that result in the reduction, sequestration or use of CO2e emissions will be carried out in Canada; (b) the project’s reduction, sequestration or use of CO2e emissions will be determined using the generic emission-reduction quantification method; (c) the activity specified in the generic emission-reduction quantification method that allows the project to begin to reduce, sequester or use CO2e emissions was or will be carri

    The text continues in the official source.

    Related guides, FAQ and contract templates