LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2021-248:en

    SOR-2021-248:en — Canada–Nova Scotia Offshore Area Occupational Health and Safety Regulations

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 (1) The following definitions apply in these Regulations. accommodations area means the area of a marine installation or structure that contains the sleeping quarters, dining areas, food preparation areas, general recreation areas, office areas and medical rooms, and includes all washrooms in that area. (aire d’habitation) Act means the Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation Act. (Loi) advanced first aid certificate means a certificate evidencing the holder’s successful completion of a training program whose curriculum conforms to the curriculum for advanced first aid set out in CSA Group standard Z1210, First aid training for the workplace – Curriculum and quality management for training agencies, or, in the case of marine crew on a vessel, whose curriculum conforms to Chapter 4 of Department of Transport publication TP 13008, Training Standards for Marine First Aid and Marine Medical Care. (certificat en secourisme avancé) ANSI means the American National Standards Institute. (ANSI) ASME means the American Society of Mechanical Engineers. (ASME) biological exposure index means the biological exposure index established for a substance or agent by the American Conference of Governmental Industrial Hygienists in its publication TLVs and BEIs: Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices. (indice biologique d’exposition) competent person means a person who, in respect of a task, (a) has the knowledge, training and experience necessary to do the task in a manner that protects the health and safety of all persons at the workplace; and (b) has knowledge of the provisions of the Act, these Regulations and the occupational health and safety program that apply to the task and of the potential or actual danger that the task poses to the health or safety of persons. (personne compétente) confined space means an enclosed or partially enclosed space that (a) is not designed or intended for human occupancy except on a temporary basis for the purpose of performing a specific task; (b) is or may become hazardous to a person in it, including by reason of its design, construction, location or atmosphere or the materials or substances it contains, without regard to any protection that may be afforded to the person through the use of personal protective equipment or additional ventilation; and (c) has restricted means of access and egress, or an internal configuration, that could make first aid, evacuation, rescue or other emergency response services difficult to provide. (espace clos) de-energized, in respect of any equipment, machine, device or system, or any component of one of those things, means that it is disconnected from all energy sources and void of any residual or stored energy. (hors tension) dive project means any work or activity for which an authorization to dive has been issued. (projet de plongée) electrical equipment means equipment that uses electricity or that is used for the generation or distribution of electricity. (équipement électrique) energized, in respect of an electrical conductor, a circuit part or electrical equipment, means that it is a source of voltage or is electrically connected to a source of voltage. (Version anglaise seulement) energy includes electrical, mechanical, hydraulic, pneumatic, chemical, radiant, thermal and gravitational energy. (énergie) energy-isolating device means a device that physically prevents the transmission or release of energy or a substance that is a source of energy, including (a) a manually operated electrical circuit breaker; (b) a disconnect switch; (c) a manually operated switch by means of which the conductors of a circuit can be disconnected from all ungrounded supply conductors; (d) a valve; or (e) a blind, blank or blocking seal. (dispositif d’isolation des sources d’énergie) environmental conditions means meteorological, oceanographical and other natural conditions, including ice conditions, that may affect operations at a workplace. (conditions environnementales) first aider means a person who holds a valid standard first aid certificate or advanced first aid certificate or who meets the requirements referred to in subsection 33(1) but is not a medic. (secouriste) hazard information, in respect of a hazardous substance, means information respecting the health and physical hazards posed by the substance and respecting its proper and safe storage, handling, use and disposal. (renseignements sur les risques) hazardous product has the same meaning as in section 2 of the Hazardous Products Act. (produit dangereux) high-pressure washing means the use of water or another liquid delivered from a pump at a pressure exceeding 10 MPa, with or without the addition of solid particles, to remove unwanted matter from a surface. (lavage sous haute pression) hot work means any work or activity, other than the use of explosives, that involves the use of or is likely to produce fire, sparks or another source of ignition. (travail à chaud) IMO Resolution MSC.81(70) means the annex to International Maritime Organization Resolution MSC.81(70), Revised Recommendation on Testing of Life-Saving Appliances. (résolution MSC.81(70) de l’OMI) lockout means the securing, in accordance with the procedures referred to in paragraph 142(b), of a lockout device on an energy-isolating device that is being used to isolate the energy source of a piece of equipment, machine, device or system. (cadenassage) lockout device means a device that prevents the manipulation or removal of an energy-isolating device. (dispositif de cadenassage) LSA Code means the annex to International Maritime Organization Resolution MSC.48(66), International Life-Saving Appliance (LSA) Code. (recueil LSA) materials handling equipment means equipment, other than an elevator or personnel lift, that is used to transport, lift, move or position things or persons and includes gear and devices used in conjunction with other equipment in carrying out those functions. (équipement de manutention) medic means a person designated under subsection 33(1). (technicien médical) mobile equipment means wheeled or tracked materials handling equipment that is engine- or motor-powered, together with any attached or towed equipment. (équipement mobile) occupational health and safety program means the occupational health and safety program referred to in section 210.02 of the Act. (programme de santé et de sécurité au travail) piping system means an assembly of pipes, pipe fittings, valves or other control or safety devices, pumps, compressors and other fixed equipment. (réseau de canalisations) professional engineer means a competent person who is registered or licensed to engage in the practice of engineering under the laws of the province in which they practise. (ingénieur) rated capacity means the maximum load that equipment can handle or support safely, including, if applicable, in a given operational position or configuration, without regard to environmental conditions. (capacité nominale) safety data sheet has the same meaning as in section 2 of the Hazardous Products Act. (fiche de données de sécurité) specialized dive physician means a physician who is licensed to practise medicine in Canada and (a) meets the competencies of a Level 3 Physician set out in CSA Group standard Z275.4, Competency standard for diving, hyperbaric chamber, and remotely operated vehicle operations; or (b) possesses a diploma in hyperbaric medicine with a focus on diving medicine from the Royal College of Physicians and Surgeons of Canada and has completed training in saturation diving medicine that is recognized by that College. (médecin de plongée spécialisé) standard first aid certificate means a certificate evidencing the holder’s successful completion of a training program whose curriculum conforms to the curriculum for intermediate first aid set out in CSA Group standard Z1210, First aid training for the workplace – Curriculum and quality management for training agencies or, in the case of marine crew on a vessel, whose curriculum conforms to Chapter 3 of Department of Transport publication TP 13008, Training Standards for Marine First Aid and Marine Medical Care. (certificat en secourisme général) threshold limit value means the threshold limit value established for a substance or agent by the American Conference of Governmental Industrial Hygienists in its publication TLVs and BEIs: Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices. (valeur limite d’exposition) work area means the specific area in which an employee carries out their tasks. (espace de travail) work permit means a permit referred to in section 53. (permis de travail) (2) The following definitions apply for the purposes of Part III.1 of the Act. diving operation means any work or activity related to a dive — including any work or activity involving a diver or carried out by a person assisting a diver — that takes place from the start of pressurization or descent to the end of depressurization or ascent. (opération de plongée) incident means an event that resulted in any of the following occurrences or in which any of the following occurrences was narrowly avoided: (a) death; (b) serious injury within the meaning of subsection 210.017(5) of the Act; (c) missing person; (d) fire or explosion; (e) collision; (f) exposure to a hazardous substance in excess of the threshold limit value or biological exposure index for that substance; (g) impairment of any structure, facility, equipment or system critical to the safety of persons; or (h) implementation of emergency response procedures. (événement) 2 (1) In these Regulations, any incorporation by reference of a document is an incorporation by reference of that document as amended from time to time. (2) Despite subsection (1), if a document that is incorporated by reference is available in both official languages, any amendment to it is incorporated only when the amended version is available in both official languages. 3 (1) In the event of any inconsistency or conflict among provisions of these Regulations, including those that incorporate documents by reference, the provision that imposes the most stringent requirement applies. (2) In the event of any inconsistency between an obligation imposed by these Regulations and an obligation in respect of occupational health and safety that is imposed by the Nova Scotia Offshore Petroleum Installations Regulations or the Nova Scotia Offshore Petroleum Drilling and Production Regulations, these Regulations prevail, regardless of whether the obligations are imposed on the same person. 4 The occupational health and safety policy referred to in section 210.011 of the Act must contain (a) the commitment of the operator to cooperate with any committee or coordinator, as the case may be, with regard to health and safety; and (b) an overview of the duties of all persons under Part III.1 of the Act. 5 (1) The occupational health and safety management system referred to in section 210.015 of the Act must set out procedures for (a) setting goals for the improvement of workplace health and safety, identifying specific targets against which the attainment of those goals is to be measured and reviewing those goals and targets at least annually; (b) ensuring that employees (i) are competent persons in respect of all tasks to be carried out by them, (ii) are kept aware of activities and occurrences that may have an impact on their health or safety at the workplace, and (iii) are supervised to ensure that they perform their duties safely; (c) ensuring that the most recent versions of all documents associated with the system are readily available to all persons at the workplace; (d) collecting, managing and analyzing data with respect to occupational health and safety, including hazards, occupational disease, accidents, incidents and other hazardous occurrences, and identifying trends in that data; and (e) keeping training and competency records in respect of employees, including workplace committee members. (2) The audit referred to in paragraph 210.015(2)(g) of the Act must be carried out at as soon as practicable after each of the following occurrences and, in any event, at least once every three years: (a) any change of circumstances that may affect the health and safety of persons at the workplace; (b) the provision by a health and safety officer to the operator of a report under subsection 210.075(1) of the Act indicating non-compliance with Part III.1 of the Act; and (c) the making by a health and safety officer of an order under section 210.093 or 210.094 of the Act in relation to the workplace. (3) The operator must implement any improvements identified during the audit referred to in paragraph 210.015(2)(g) of the Act as soon as practicable. 6 (1) Every occupational health and safety program must (a) set out procedures for ensuring that all employees at the workplace comply with the program and with Part III.1 of the Act and all regulations made under that Part; (b) set out procedures for ensuring that employees are competent persons in respect of all tasks to be carried out by them and are kept aware of activities and occurrences that may have an impact on their health or safety at the workplace; (c) set out procedures for keeping training and competency records in respect of employees; (d) set out procedures for keeping records necessary for the auditing of the program; (e) set out procedures and schedules that conform to paragraph 210.019(1)(p) of the Act for carrying out inspections for the purpose of hazard identification; (f) prioritize the implementation of hazard control measures in the following order: (i) measures that involve the elimination of hazards, (ii) measures that involve the selection of less hazardous means of carrying out work and activities, (iii) measures that involve the use of engineering controls to reduce the risks posed by hazards, (iv) measures that involve the use of administrative controls to reduce the risks posed by hazards, and (v) measures that involve protection from the effects of hazards; (g) identify the persons responsible for implementing hazard control measures, including after an occupational disease, accident, incident or other hazardous occurrence; (h) set out procedures for (i) the reporting of hazards by persons at the workplace to the employer, and (ii) the reporting, by the employer to a committee or to the coordinator, of hazards, occupational diseases, accidents, incidents, other hazardous occurrences and failures to comply with the provisions of Part III.1 of the Act, the regulations made under that Part or the occupational health and safety requirements of any authorization issued in relation to the workplace; (i) set out procedures for the prompt investigation of occupational diseases, accidents, incidents and other hazardous occurrences to determine their root cause and identify any actions that are necessary to prevent their reoccurrence; and (j) set out procedures for implementing corrective and preventive measures following an occupational disease, accident, incident or other hazardous occurrence and verifying the effectiveness of those measures. (2) The audit referred to in paragraph 210.02(2)(h) of the Act must be carried out at as soon as practicable after any of the following occurrences and, in any event, at least once every three years: (a) any change of circumstances that may affect the health and safety of persons at the workplace; (b) any change made by the operator to its management system; (c) the provision by a health and safety officer to the employer of a report under subsection 210.075(2) of the Act indicating non-compliance with Part III.1 of the Act; and (d) the making by a health and safety officer of an order under section 210.093 or 210.094 of the Act in relation to the workplace. (3) The employer must implement any improvements identified during the audit referred to in paragraph 210.02(2)(h) of the Act as soon as practicable. 7 (1) A workplace committee that establishes rules of procedure must include among them (a) the quorum required for committee meetings; (b) the manner in which the committee will address complaints or concerns of employees, work refusals, occupational diseases, accidents, incidents and other hazardous occurrences that are reported to it; (c) a rule whereby a complaint or concern raised with any committee member is to be considered a complaint or concern raised with the committee as a whole; and (d) the time and manner in which complaints and concerns are to be responded to and recommendations made under paragraph 210.043(5)(d) of the Act. (2) Every workplace committee must, for the purpose of paragraph 210.043(4)(d) of the Act, provide a copy of the minutes of its committee meetings to any employee on request. 8 All records that are required under the Act to be kept must be maintained in a manner that ensures their accessibility. 9 (1) The period for which an operator or employer, as the case may be, must ensure that a document is posted under paragraph 210.098(4)(a) of the Act is at least 45 days. (2) If a decision or order is appealed under subsection 210.101(1) of the Act, the operator or employer, as the case may be, must ensure that all related documents referred to in paragraphs 210.098(1)(a) to (d) of the Act remain posted until the 45th day after the day on which the decision or order is revoked, confirmed or varied under subsection 210.101(9) of the Act. 10 An employee who becomes aware of an occupational disease or an accident, incident or other hazardous occurrence at the workplace must, without delay, report it to their supervisor or their employer, orally or in writing. 11 A supervisor to whom or employer to which — if that employer does not have control over the workplace — an occupational disease, accident, incident or other hazardous occurrence is reported under section 10 must, without delay, report it to the employer with control over the workplace, orally or in writing. 12 An employer that becomes aware of an occupational disease or an accident, incident or other hazardous occurrence at a workplace under its control must, without delay, (a) take all measures necessary to ensure the health and safety of all persons at the workplace; and (b) provide to the operator, in writing, a brief description of the occupational disease, accident, incident or other hazardous occurrence, including the name of any affected persons and, if applicable, the date on which and the time and location at which it occurred. 13 An operator that is required under subsection 210.017(1) of the Act to notify the Chief Safety Officer of an occupational disease, accident, incident or other hazardous occurrence must do so in writing. 14 (1) An operator that is required, under subsection 210.017(2) of the Act, to investigate an occupational disease, accident, incident or other hazardous occurrence must obtain, within 14 days after the day on which it becomes known to the operator, a report, prepared by a competent person and accompanied by supporting documentation, that sets out, in respect of the disease, accident, incident or other occurrence and to a level of detail that is proportional to its actual or potential severity, (a) in the case of an accident, incident or other hazardous occurrence, the date on which and the time and location at which it occurred; (b) the name of the affected employee, if any; (c) a description of it and of any resulting symptoms or injury; (d) a description of the treatment provided, if any; (e) its causal factors and root causes; (f) other information relevant to its nature or impact; and (g) corrective and preventive measures that could be taken to prevent a similar situation from reoccurring. (2) The operator must submit a copy of the report and supporting documentation without delay to (a) the workplace committee or the coordinator, as the case may be; and (b) the Chief Safety Officer. (3) If the operator becomes aware of new information that may result in a material change to the report, the operator must obtain an updated report and supporting documentation and submit a copy without delay to the persons referred to in paragraphs (2)(a) and (b). (4) For the purpose of subsection 210.017(2) of the Act, (a) the records that every operator must keep include all reports obtained under subsection (1) or (3) and their supporting documentation; and (b) the period for which each record must be retained is (i) 40 years from the day on which it is made, if it relates to an occupational disease or exposure or potential exposure to a hazardous substance in excess of the threshold limit value or biological exposure index for that substance, (ii) 10 years from the day on which it is made, if it relates to an incident other than the exposure or potential exposure referred to in subparagraph (i), or (iii) five years from the day on which it is made, if it relates to any other accident or hazardous occurrence. 15 The training that every employer must provide to each of its employees includes, (a) before the employee is first transported to a workplace and then as necessary to ensure the training remains valid for the duration of the employee’s employment at the workplace, (i) an offshore survival training program appropriate to the workplace location and to the means of transportation to be used to transport the employee to and from the workplace, (ii) training on the legislation applicable to occupational health and safety, including the rights of employees and the duties of operators, employers, supervisors and employees, and (iii) training on hydrogen sulfide safety, if hydrogen sulfide may be present at the workplace; and (b) without delay on the employee’s arrival at a workplace at which they have not been present in the previous six months and before they perform any work there, (i) an orientation to the hazards and emergency procedures at the workplace, (ii) training in respect of any emergency duties that may be assigned to them at that workplace, and (iii) if the workplace is a marine installation or structure that is equipped with lifeboats, practice in boarding a lifeboat and securing themselves on a seat. 16 Every employer must ensure that all instruction and training that it is required to provide under the Act is developed by and, if applicable, delivered by a competent person. 17 Every employer must retain records of all instruction and training provided under the Act for (a) at least five years after the day on which the person to whom the instruction or training is provided ceases to be employed at any of the employer’s workplaces; or (b) if the person to whom the instruction or training is provided is not an employee of the employer, at least five years after the instruction or training is provided. 18 (1) Every employer must, for each workplace under its control that is a marine installation or structure and having regard to the risk assessment carried out by it for the purpose of the occupational health and safety program, develop, implement and maintain a written emergency response plan in preparation for any reasonably foreseeable emergency that might compromise the health and safety of persons at that workplace or at any other workplace under its control that is a workboat or dive site associated with the marine installation or structure. (2) The emergency response plan must (a) indicate the maximum number of persons who can safely occupy the workplace; (b) indicate the minimum number of persons needed at the workplace to be able to maintain safe operations in the event of an emergency; (c) set out procedures for ensuring that the personnel on board list, which sets out the total number of persons at the workplace each day and the name, position, employer and, if applicable, cabin number of each, is kept up to date; (d) set out the name and contact information of the operator, if the operator is not the employer with control over the workplace; (e) provide for the establishment of emergency response teams; (f) set out the name, position and contact information, including the usual location, of each person responsible for overseeing the emergency response teams and the implementation of emergency response procedures, as well as the name, position and contact information of those persons’ delegates; (g) set out the duties of employees, including members of the emergency response teams, and the procedures to be followed by all persons during an emergency; (h) indicate the muster station or other location where each employee is required to report during an emergency; (i) identify the system to be used for counting employees at each muster station and determining which employees, if any, are missing; (j) include a description of all emergency alarm signals that may be used, including how the order to abandon is to be given; (k) set out contact information for obtaining a means of transportation to be used to evacuate the workplace; (l) identify and set out contact information for all emergency response entities — and other entities operating nearby — that could render assistance in the event of an emergency; (m) include verified drawings of the layout of the workplace that clearly identify the person who verified them, indicate the scale of the drawings and show (i) the location of all exits, fire escapes, stairways, elevators, corridors and other exit routes, (ii) the location of all muster stations, temporary refuge areas, evacuation stations and other locations where lifeboats and life rafts are stored, (iii) the location, quantity and type of all equipment that may be used or worn in implementing emergency response procedures, (iv) the location of manual emergency shutdown and activation devices for all safety critical systems, (v) the location, quantity and type of all emergency communications equipment, (vi) the location of all first aid stations, medical rooms and casualty clearing areas, and (vii) the location of all designated hazardous substance storage areas; and (n) identify all resources necessary for the plan’s implementation. (3) The employer must ensure that a copy of the emergency response plan is made readily available to all employees at the workplace. (4) If an employer has employees at a workplace not under its control, it must ensure that those employees comply with (a) the duties and procedures set out in the emergency response plan developed by the employer with control over the workplace; or (b) emergency duties and procedures that the employer has ensured are aligned with those referred to in paragraph (a). 19 Every employer must ensure that the following items are posted in the specified locations, separately from the emergency response plan, at each workplace under its control that is a marine installation or structure: (a) a station bill containing the information referred to in subsection 7(1) of the Fire and Boat Drills Regulations as well as a description of any additional alarm signals, the membership of all emergency response teams and the location of all evacuation stations (i) in conspicuous places on every deck, and (ii) on the bridge, if the workplace is a vessel, or at the location where the installation manager referred to in section 198.2 of the Act is expected to be during an emergency, if the workplace is not a vessel; (b) the personnel on board list referred to in paragraph 18(2)(c), at the applicable location referred to in subparagraph (a)(ii); and (c) a drawing identifying all emergency escape routes from the location at which it is posted (i) at conspicuous locations around the workplace, and (ii) in every person’s sleeping quarters. 20 The instruction and training that every employer must provide to each of its employees includes (a) training in the procedures to be followed by the employee in the event of an emergency; and (b) instruction on the location of any emergency and fire protection equipment that the employee may be reasonably expected to use and training in the use of that equipment. 21 Every employer must ensure, with respect to each workplace under its control that is a marine installation or structure, that (a) all muster stations, escape routes, exits, stairways and any other means of evacuation are maintained in serviceable condition and, to the extent feasible, are accessible and ready for use at all times; (b) all exits to the exterior, muster stations and evacuation stations are clearly identified by illuminated signs or otherwise clearly visible in all conditions; and (c) all escape routes are clearly identified with light-reflecting or illuminated markings. 22 (1) Every employer must ensure that the location of all equipment to be used or worn in implementing emergency response procedures at each workplace under its control is clearly identified with light-reflecting or illuminated signs. (2) Every employer must provide, in all sleeping quarters at a workplace under its control, a readily available grab bag for each person assigned to the sleeping quarters containing a smoke hood, heat-resistant gloves and a portable light source to enable the person to reach muster stations, temporary refuge areas and evacuation stations in conditions of fire, intense heat or smoke. (3) Every employer must ensure that the emergency escape breathing devices or respirators that it provides in accordance with paragraph 46(a) are provided in appropriate quantities and at appropriate locations at the workplace to facilitate escape, having regard to (a) the maximum number of persons who may be at the workplace; (b) how those persons are generally distributed among various areas at the workplace; and (c) the configuration of the workplace and the potential for a person’s ability to move within it to be impeded by hazards arising from the situation that requires escape or from the escape itself. (4) Every employer must ensure that the immersion suits that it provides in accordance with paragraph 46(b) are provided in appropriate quantities and sizes and at appropriate locations at the workplace to facilitate abandonment, having regard to (a) the maximum number of persons who may be at the workplace; (b) how those persons are generally distributed among various areas at the workplace; (c) those persons’ sizes; and (d) the configuration of the workplace and the potential for a person’s ability to move within it to be impeded by hazards arising from the situation that requires abandonment or from the abandonment itself. (5) Despite subsection (4), the employer must provide the following minimum number of immersion suits: (a) in the case of a workplace that is a marine installation or structure used for drilling or production or as a living accommodation, (i) if it is normally attended, two immersion suits for each person at the workplace, including one in the person’s sleeping quarters, and (ii) if it is normally unattended, one immersion suit for each person at the workplace; (b) in the case of a workplace that is a marine installation or structure used for construction, diving or geotechnical or seismic work, one immersion suit for each person at the workplace, plus two additional suits in each of the bridge and the engine control room; and (c) in the case of any other workplace, one immersion suit for each person at the workplace. 23 Every employer must ensure that each workplace under its control that is a marine installation or structure is equipped with a public address and alarm system that is audible or visible, as the case may be, in all areas of the workplace where a person may be present and is to be used to warn persons if (a) the workplace has to be evacuated; (b) a fire is detected; (c) there is a malfunction of a mechanical ventilation system provided for an area where toxic or combustible gases may accumulate to hazardous levels; (d) there is a person overboard; or (e) there is any other threat to the health or safety of persons at the workplace. 24 Every employer must ensure that each workplace under its control that is a marine installation or structure is equipped with an emergency power source that is sufficient to operate the following to the degree necessary to allow for safe occupancy of or egress from the workplace in the case of a failure of the main power system: (a) the public address and alarm system; (b) the emergency lighting system; (c) internal and external communications systems; and (d) light and sound signals marking the location of the workplace. 25 (1) Every employer must provide, on each derrick or other elevated part of a workplace under its control that is a marine installation or structure, if there is only one usual means of escape from that location, a device that would allow a person to descend from the location by another means at a controlled speed in an emergency. (2) The device must be capable of being operated despite the loss of the main source of power. (3) The employer must ensure that written instructions for operating the device are kept in a conspicuous place near the location where the device is stored. 26 (1) Fire and explosion are prescribed risks for the purpose of paragraph 210.02(2)(a) of the Act and every employer must ensure that each workplace under its control is designed, constructed, arranged and maintained to minimize those risks. (2) The occupational health and safety program in respect of a workplace that is a marine installation or structure must identify (a) all areas at the workplace, as classified according to a comprehensive and documented classification system, in which flammable, explosive or combustible substances are or are likely to be present in sufficient quantities and for sufficient periods of time to require special precautions to be taken in the selection, installation or use of machinery and electrical equipment to prevent a fire or explosion; and (b) the precautions applicable to those areas. (3) The employer with control over the workplace must ensure that signs are posted in conspicuous places at each of the areas referred to in subsection (2), identifying them as areas in which there is a risk of fire or explosion. (4) The employer must ensure that no person uses an open flame or other source of ignition in an area referred to in subsection (2) unless they are carrying out hot work in accordance with Part 26. (5) Every employer must ensure that any temporary or portable heating equipment that is used at a workplace under its control is located, protected and used in a manner that prevents the equipment from being overturned or damaged and any combustible materials in the vicinity from igniting. 27 Every employer must equip each workplace under its control with the firefighting equipment that is appropriate for that type of workplace and all classes of fire that may occur there. 28 (1) The personal protective equipment that every employer with control over a workplace that is a marine installation or structure must provide to each of its employees, and any other individual at the workplace, who is tasked with fighting fires includes (a) a self-contained breathing apparatus with two full spare cylinders that (i) is selected and maintained in accordance with CSA Group standard Z94.4, Selection, use, and care of respirators, (ii) conforms to the design and performance requirements in National Fire Protection Association Standard NFPA 1981, Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services, and (iii) is equipped with a personal distress alarm device; (b) life safety ropes, belts and harnesses that conform to the design and performance requirements in National Fire Protection Association Standard NFPA 1983, Standard on Life Safety Rope and Equipment for Emergency Services, with the provisions of that standard pertaining to flame resistance being read as mandatory; and (c) personal protective clothing — including boots, gloves, helmet and visor, coat and trousers — that conforms to the design and performance requirements in National Fire Protection Association Standard NFPA 1971, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting. (2) The employer must also provide, (a) to each employee referred to in subsection (1), (i) a portable electric safety lamp that can be easily attached to the employee’s clothing and will operate safely in anticipated conditions for at least three hours, and (ii) an axe with an insulated handle and carrying belt; and (b) to the fire team as a whole, at least two two-way portable radiotelephone apparatus that are designed not to produce any spark or other source of ignition. (3) Despite subsection (1) and paragraph (2)(a), if a workplace is a ship used for construction or diving or for geotechnical or seismic work, the employer may instead provide fire-fighter’s outfits that conform to the International Maritime Organization’s International Code for Fire Safety Systems. (4) The number of sets of equipment referred to in subsections (1) and (2) or fire-fighter’s outfits referred to in subsection (3), as the case may be, that the employer must provide at the workplace — and their sizing, if applicable — is to be determined having regard to the risk assessment carried out by the employer for the purpose of the occupational health and safety program. (5) Despite subsection (4), the number of sets of equipment or outfits, as the case may be, that the employer must provide is at least (a) four, if the workplace is a ship used for construction or diving or for geotechnical or seismic work; or (b) ten, in any other case. (6) The employer must ensure that the equipment provided in accordance with this section is kept ready for use and stored in a place that is easily accessible, with at least two sets of equipment or two outfits, as the case may be, being easily accessible from the helicopter deck, if any, of the marine installation or structure. 29 The risk of a person at a workplace falling into the ocean is a prescribed risk for the purpose of paragraph 210.02(2)(a) of the Act and the employer with control over that workplace must (a) provide appropriate life-saving appliances and ensure they are held in readiness; (b) ensure that a competent person is readily available at all times to operate the life-saving appliances; and (c) ensure that a fast rescue boat that meets the requirements of Chapter V of the LSA Code is provided — or available from a standby vessel that is no more than 500 m away — and held in readiness. 30 (1) Every employer must establish, for each workplace under its control that is a marine installation or structure and having regard to the risk assessment carried out by it for the purpose of the occupational health and safety program, a plan that describes the emergency drills and exercises that must be conducted at the workplace in relation to various scenarios and sets out the frequency with which they must be conducted. (2) Despite subsection (1), the employer must ensure that (a) a drill to practise mustering is conducted at least once a week; (b) a fire drill is conducted at least once a month; (c) a drill to practise escape to the location of lifeboats or life rafts in preparation for abandonment of the workplace is conducted at least once a month; (d) if the workplace is equipped with lifeboats, (i) each employee participates, at least once every six months, in a drill that requires them to board a lifeboat while wearing an immersion suit and to secure themselves on a seat, and (ii) if feasible, a lifeboat launching drill is conducted annually to test the integrity and operation of the lifeboats and launching equipment; and (e) all drills and exercises are repeated as soon as practicable after any significant change to the emergency plan or to the work or activities carried out at the workplace with respect to which an authorization has been issued. (3) If compliance with subparagraph (2)(d)(ii) is not feasible, the employer must ensure that additional inspections and testing of all components that would otherwise be tested by the launching drill are carried out in consultation with the lifeboat manufacturer and with the prior approval of the Chief Safety Officer. (4) The employer must schedule drills and exercises to ensure the equitable participation of all employees, regardless of their shift or rotation. (5) The employer must ensure that any person visiting the workplace who has not participated in the emergency drills or exercises is accompanied throughout the visit by someone who has done so. (6) The employer must keep a record of all emergency drills and exercises conducted that contains (a) the date on which and the time at which the drill or exercise was conducted; (b) a description of the drill or exercise scenario; (c) a list of all persons who participated in the drill or exercise; (d) the length of time taken to complete the drill or exercise, including the length of time to achieve a full muster; and (e) observations regarding the execution of the drill or exercise and opportunities for improvement. (7) The employer must retain the records referred to in subsection (6) for at least three years after the day on which the drill or exercise is carried out. 31 Every operator must ensure that (a) a physician who has specialized knowledge in the treatment of illnesses and injuries that may arise at the workplace is readily available at all times to provide medical advice, remotely from a location in Nova Scotia, to any medic or first aider at the workplace and to be transported to the workplace, if necessary, to provide medical care, unless the workplace has a medic who is a physician with that knowledge; (b) an emergency medical evacuation service is available at all times for transporting an injured or ill person from the workplace to a hospital onshore using a means of transportation that (i) is equipped with appropriate first aid and medical supplies, (ii) is capable of accommodating and securing an occupied stretcher, and (iii) has one or more competent persons available on board to provide first aid or medical care to the injured or ill person during transportation; and (c) persons at the workplace have a means of quickly summoning the emergency medical evacuation service. 32 (1) Every employer with control over a workplace must (a) when assessing the risk of illness or injury at the workplace for the purpose of the occupational health and safety program, consult with a medic, if one is required at the workplace, and take into account (i) the location of the workplace and the expected delay in obtaining emergency medical services, (ii) the layout of the workplace, and (iii) environmental factors, including thermal considerations; (b) develop, in consultation with a medic, if one is required at the workplace — and with a specialized dive physician, if a dive project is to be carried out from the workplace — a written medical emergency response plan that addresses all reasonably foreseeable emergencies at the workplace and takes into account the location of the workplace, the time of year at which the work is to be carried out, the expected number of persons at the workplace during normal operations and the workplace’s maximum capacity; (c) determine, in consultation with a medic, if one is required at the workplace — and with a specialized dive physician, if a dive project is to be carried out from the workplace — the type and quantity of first aid and medical supplies and equipment, medication and facilities needed to respond to all reasonably foreseeable injuries and illnesses at the workplace and ensure that those supplies, that equipment, those medications and those facilities are provided, maintained, replenished and replaced as necessary; (d) establish and make readily available to all persons at the workplace written procedures for promptly obtaining first aid or medical care for any injury or illness, including procedures to follow while awaiting that care; (e) keep a diagram indicating the location of all first aid kits and medical rooms conspicuously posted at the workplace; (f) keep an up-to-date list of telephone numbers for use in emergencies conspicuously posted near every fixed telephone at the workplace; (g) keep a list of all medics and first aiders who are present at the workplace, as well as information on how and when they may be contacted and where they may be located, conspicuously posted in every medical room at the workplace; (h) keep a list of all medics who are present at the workplace — or, if no medic is required, of the first aiders who hold the highest level of first aid certificate held by any first aider at the workplace — as well as information on how and when they may be contacted and where they may be located conspicuously posted (i) on the bridge, if the workplace is a vessel, or (ii) at the location where the installation manager referred to in section 198.2 of the Act is expected to be during an emergency, if the workplace is not a vessel; and (i) ensure that the number of first aiders and medics set out in columns 2 to 4 of the following table that correspond to the number of persons at the workplace set out in column 1 are present at the workplace and readily available to provide prompt and appropriate first aid or medical care to persons at the workplace: (2) The first aid supplies referred to in paragraph (1)(c) must include first aid kits that (a) conform to CSA Group standard Z1220, First aid kits for the workplace; (b) contain only the supplies necessary for rendering first aid, which are maintained in a clean, dry and serviceable condition; (c) are inspected at least monthly; and (d) are clearly identified by conspicuous signs and readily accessible at various locations throughout the workplace. (3) If the workplace is a marine installation or structure, the first aid equipment referred to in paragraph (1)(c) must include (a) at least one automated external defibrillator in a common area accessible to all persons at the workplace; and (b) additional automated external defibrillators in the quantities and locations that are necessary, having regard to the risk assessment carried out by the employer for the purpose of the occupational health and safety program. (4) If the workplace is a marine installation or structure, the facilities referred to in paragraph (1)(c) must include a medical room (a) whose location is clearly identified by conspicuous signs; (b) that is supervised by a medic or, if no medic is required at the workplace, a first aider who holds the highest level of first aid certificate held by any first aider at the workplace; (c) whose location and design allow patients on stretchers to be easily transported to it from other locations at the workplace and from it to any deck from which patients may be transported from the workplace; (d) that allows for optimum ease of access to persons carrying a patient on a stretcher; (e) that is maintained in an orderly and sanitary condition and in which all surfaces are easily cleaned and disinfected; (f) that contains or is located adjacent to a washroom; (g) that contains (i) a rectangular treatment table that is accessible from both long sides and at least one short side, (ii) a medical lamp with an adjustable arm, (iii) a means of securing a stretcher in place when it is occupied by a patient, (iv) a handwashing facility supplied with running hot and cold water, (v) a hand-held shower head that can easily reach the patient, (vi) a storage cupboard and counter, (vii) a separate cubicle or curtained-off area with a cot or bed equipped with a moisture-protected mattress and two moisture-protected pillows, (viii) a table and at least two chairs, (ix) a lockable medical chest or cabinet, (x) a waste receptacle and a means of safely disposing of biohazards and sharp objects, (xi) sufficient electrical outlets of the appropriate voltage for the equipment to be used in the room, and (xii) all other medical supplies and equipment that are determined to be necessary under paragraph (1)(c); (h) in which information is accessible regarding (i) first aid procedures in respect of any reasonably foreseeable injury or illness at the workplace, (ii) all hazardous substances at the workplace, including the procedures for treating exposure to them and, in the case of hazardous products, their safety data sheets, if any, or other documents containing hazard information in respect of them, and (iii) procedures for transporting injured or ill persons within and from the workplace; and (i) that contains an effective means of hands-free electronic communication with the physician referred to in paragraph 31(a) and other emergency contacts, as well as an up-to-date list of the names and contact information of those persons for use in emergencies. 33 (1) An employer may designate a person as a medic if that person (a) has experience with helicopter or fixed-wing aircraft evacuation for medical purposes; (b) holds an advanced cardiac life support certificate or basic cardiac life support instructor’s certificate issued by an entity that bases its training on International Liaison Committee on Resuscitation guidelines; and (c) meets one of the following requirements: (i) they hold a licence to practise medicine in Canada and have at least two years’ clinical experience in intensive care or emergency practice, (ii) they hold a registered nursing certificate recognized by a provincial regulatory body and have at least two years’ clinical experience in intensive care or emergency practice, or (iii) they hold an advanced care paramedic certificate or critical care paramedic certificate issued by a college in Canada and have at least three years’ experience as an advanced life support provider. (2) The designation under subsection (1) must be made in writing. (3) The employer must not assign to the medic any other duties that will interfere with the prompt and adequate provision of first aid and medical care. (4) When providing first aid or medical care to an injured or ill person, a medic (a) must not be overruled by anyone other than the physician referred to in paragraph 31(a); and (b) must follow any directions given by the physician referred to in paragraph 31(a). 34 (1) Every employer must allow any first aider — and any other employee that the first aider needs for assistance — to provide prompt and adequate first aid to an injured or ill person and ensure that they have adequate time to do so, with no loss of pay or benefits. (2) When providing first aid to an injured or ill person, a first aider (a) must not be overruled by anyone other than a physician, a medic or, if they hold a standard first aid certificate, a first aider with an advanced first aid certificate; and (b) must remain in charge of the person’s care until the first aid is complete or the person is under the care of a physician, a medic or, if they hold a standard first aid certificate, a first aider with an advanced first aid certificate. 35 (1) Every first aider or medic who provides care to an injured or ill person or from whom treatment is sought must make and sign a record containing the following information: (a) the full name of the injured or ill person; (b) a brief description of the injury or illness — and of the occurrence that gave rise to it, if any — including, as applicable, the date on which and the time and location at which the injury or occurrence occurred or the date on which and the time at which symptoms of the illness were first experienced; (c) a brief description of any treatment provided by the first aider or medic, including the date on which and time at which it was provided; and (d) a brief description of any arrangements made for the treatment or transportation of the injured or ill person. (2) The employer with control over the workplace at which the record is made must retain it, from the day on which the injury or illness is first documented, for (a) 40 years, in the case of treatment for an occupational disease or exposure to a hazardous substance; (b) 10 years, in the case of treatment for an injury resulting from an incident, other than exposure to a hazardous substance, or for a musculoskeletal injury, as defined in subsection 41(3); and (c) five years, in any other case. 36 Every occupational health and safety program must set out measures for promoting mental health and healthy lifestyles and must address substance abuse, the effects on mental health of working in a remote location and the management of mental illness. 37 (1) Impairment, including as a result of fatigue, stress, injury, illness, another physical or psychological condition, alcohol or drugs, is a prescribed risk for the purpose of paragraph 210.02(2)(a) of the Act and every occupational health and safety program must (a) set out the roles and duties of all workplace parties in identifying and preventing the consequences of impairment on the health and safety of employees; (b) identify factors that may contribute to impairment or its causes, such as work and workplace conditions, work scheduling and task type and length; (c) require that the factors referred to in paragraph (b) be regularly monitored at the workplace and taken into account, in conjunction with incident reports, employee complaints, workplace committee reports and records of excess work hours kept under paragraph (e) or subsection 39(3), to identify any potential impairment; (d) require the development, maintenance and implementation of an appropriate work shift design that allows adequate rest periods; (e) require records to be kept of hours worked by an employee beyond their usual shift or rotation; and (f) require that the risk of fatigue be taken into account in developing all workplace procedures. (2) Every employer must ensure that no employee at a workplace under its control is permitted to work if their ability to do so is impaired in a manner that is likely to be hazardous to their health or safety or that of any other person at the workplace. (3) Impairment must be considered as a potential causal factor in the investigation of all incidents at the workplace. 38 The instruction and training that every employer must provide to its employees includes instruction and training on the factors that contribute to fatigue, procedures for identifying and reporting fatigue and the role and duties of employees in managing fatigue. 39 (1) Every employer must ensure that no employee works at a workplace under its control unless they have been provided with a period of at least 11 consecutive hours of rest in the previous 24 hours. (2) An employer may, in extenuating circumstances, allow an employee to work without having had that rest period if the employer has assessed the risk associated with the employee working the extra hours and determined, in consultation with the employee, that the work can be carried out without increased risk to their health or safety. (3) If an employer allows an employee to work without having had that rest period, the employer must ensure that a description of the work, the name of the employee, the hours worked, the reason for the exception and the result of the risk assessment referred to in subsection (2) are recorded. (4) Subsection (1) does not apply in the event of an emergency at the workplace that may be hazardous to the health or safety of employees. (5) Despite subsections (1) and (2), the employer with control over a workplace for which an authorization has been issued for a period of less than six months may alternatively comply, in respect of the marine crew, with the daily hours of work and minimum rest requirements outlined in the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW), 1978. 40 Thermal stress is a prescribed risk for the purpose of paragraph 210.02(2)(a) of the Act and every employer must ensure, in respect of all persons at each workplace under its control who may be exposed to heat or cold, that (a) their exposure is kept below the applicable threshold limit value or action limit established by the American Conference of Governmental Industrial Hygienists in its publication TLVs and BEIs: Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices, as the case may be; (b) they are informed of the risk and advised of measures to be taken to minimize their exposure to it; (c) they are regularly monitored for signs of thermal stress; (d) they are provided with clothing and equipment that offers protection against thermal stress; (e) screens or shelters are provided to protect them against the elements, if applicable; (f) measures are taken to acclimatize them to temperatures at the workplace; (g) hot or cold beverages, as the case may be, are made available to them; and (h) work schedules, including rest periods, are established having regard to thermal stress. 41 (1) Musculoskeletal injury is a prescribed risk for the purpose of paragraph 210.02(2)(a) of the Act and the procedures referred to in that paragraph must include an assessment, in consultation with the following persons, of the extent to which that risk is associated with each type of work carried out at the workplace: (a) a representative sample of employees who are required to carry out that type of work; and (b) employees who have signs or symptoms of musculoskeletal injury. (2) The employer must ensure that interim hazard control measures are implemented without delay after the risks of musculoskeletal injury are assessed and permanent measures, determined with regard to the parameters established by the American Conference of Governmental Industrial Hygienists in its publication TLVs and BEIs: Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices, are implemented as soon as practicable. (3) In this section, musculoskeletal injury means an injury to or disorder of the muscles, tendons, ligaments, joints, nerves, blood vessels or related soft tissue, including a sprain, strain or inflammation. 42 (1) Workplace violence and harassment is a prescribed risk for the purpose of paragraph 210.02(2)(a) of the Act and every employer must develop and post at a place accessible to all employees a policy setting out the employer’s commitment to (a) provide a safe, healthy and violence and harassment-free workplace; (b) dedicate sufficient attention, resources and time to address factors that contribute to workplace violence and harassment; (c) communicate to its employees information in its possession about the factors referred to in paragraph (b); and (d) assist employees who have been exposed to workplace violence and harassment. (2) Every occupational health and safety program must (a) require that the assessment of the risk of violence and harassment at the workplace take into account the nature of the work carried out at the workplace, the conditions under which that work is carried out and previous experiences at the workplace and other similar workplaces; and (b) include procedures for (i) summoning immediate assistance in response to violence that poses an immediate risk of physical injury, (ii) reporting incidents of workplace violence and harassment to the employer or a supervisor, and (iii) investigating and addressing reports of workplace violence and harassment. (3) The training that every employer must provide to each of its employees includes training on the factors that contrib

    The text continues in the official source.

    Related guides, FAQ and contract templates