LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2019-107:en

    SOR-2019-107:en — Tobacco Products Appearance, Packaging and Labelling Regulations

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 (1) The following definitions apply in these Regulations. Act means the Tobacco and Vaping Products Act. (Loi) carton means a secondary package in which two or more primary packages containing the same type of tobacco product are placed. (cartouche) cigar means a roll or tubular construction intended for smoking, other than a little cigar, that contains a filler composed of natural or reconstituted tobacco and has a wrapper, or a wrapper and a binder, composed of natural or reconstituted tobacco. (cigare) cigarette includes any roll or tubular construction that contains tobacco and is intended for smoking, other than a cigar, little cigar or tobacco stick. (cigarette) display area means the portion of the surface area of a tobacco product package, leaflet or tobacco product on which a labelling element is to be displayed. (zone d’affichage) drab brown means the colour known as Pantone 448. (brun terne) gray means the colour known as Pantone Cool Gray 2. (gris) health warning, in respect of a tobacco product, means the applicable health warning (a) referred to in subsection 88(1) and displayed on a tobacco product package; or (b) referred to in subsection 118(1) and displayed directly on a tobacco product. (avertissement sanitaire) lower slide-flap means, in respect of a slide and shell package, the lower extremity of the slide that can be folded and is concealed by the shell when the package is closed. (rabat inférieur) manufacturer does not include an individual or entity that only packages or distributes tobacco products on behalf of a manufacturer. (fabricant) primary package means any package — other than an overwrap — that is intended for retail sale in Canada and in which a tobacco product is directly placed. (emballage primaire) secondary package means any package — other than an overwrap — that is intended for retail sale in Canada and in which a primary package is placed. (emballage secondaire) slide means the sliding portion of a slide and shell package. (tiroir) top edge means the edge that is in the horizontal plane and forms the upper limit of the package when the package is used in the customary manner to gain access to the tobacco product. (arête supérieure) upper slide-flap means, in respect of a slide and shell package, the upper extremity of the slide that can be folded and is concealed by the shell when the package is closed and that is visible when the package is used in the customary manner to gain access to the tobacco product. (rabat supérieur) (2) In these Regulations, a reference to a common name is a reference to the common name that is shown on a label in accordance with subparagraph 10(b)(ii) of the Consumer Packaging and Labelling Act. (3) In these Regulations, a reference to a declaration of net quantity is a reference to the declaration of net quantity that is contained on a label in accordance with section 4 of the Consumer Packaging and Labelling Act. (4) In these Regulations, a reference to an exterior surface of a package that contains a tobacco product is a reference, (a) in the case of a package that has a rectangular cuboid shape when it is closed, to the part of the package that forms, as the case may be, the exterior surface of the front, back, top, bottom or any of the sides of the package; (b) in the case of a cylindrical package, (i) to the part of the package that forms, as the case may be, the exterior surface of the top or bottom of the package when it is closed, and (ii) to the part of the package that forms, as the case may be, the exterior curved surface that makes up the front or back of the package around its circumference; and (c) in the case of any other package, to the part of the package that forms, as the case may be, the exterior surface of the front, back, top, bottom or any of the sides of the package when it is closed. (5) 2 (1) These Regulations apply to every tobacco product that is intended for retail sale in Canada, as well as to any package that contains such a tobacco product. (2) Part 1 also applies, in accordance with section 60, to a package that does not contain a tobacco product but is furnished by a manufacturer of a tobacco product so that a tobacco product, primary package or secondary package may be placed in it after the tobacco product, primary package or secondary package is sold at retail in Canada. 3 These Regulations do not apply to a package that contains a tobacco product and that is intended to be distributed to a manufacturer or retailer. 4 (1) For greater certainty, a provision of these Regulations that applies to any interior surface of a primary package that contains cigarettes applies to each surface of the slide of a slide and shell package — including the upper slide-flap and lower slide-flap — with the exception of any surface that forms the exterior surface of the top or bottom of the package when it is closed. (2) For greater certainty, a provision of these Regulations that applies to any interior surface of a secondary package applies to each surface of a carton that forms its flaps and that is visible only when the carton is opened. 5 (1) For the purposes of section 23 of the Act, these Regulations set out the requirements that manufacturers of tobacco products must meet in respect of the plain and standardized appearance, shape and content of tobacco product packages. (2) For the purposes of section 15.3 of the Act, these Regulations set out the requirements that manufacturers of tobacco products must meet in respect of the manner of displaying information on tobacco product packages and on leaflets, including the form and placement of the information. 6 For the purposes of sections 5 and 5.3 of the Act, these Regulations also establish standards that manufacturers of tobacco products must meet in respect of the plain and standardized appearance and shape of tobacco products and set out requirements that manufacturers must meet in respect of the markings that may be displayed on tobacco products. 6.1 For the purposes of sections 15 and 15.2 of the Act, these Regulations set out the labelling requirements that manufacturers of tobacco products must meet in respect of (a) information that is required under the Act to be displayed about tobacco products and their emissions and about the health hazards and health effects arising from the use of the products and from their emissions; and (b) the manner of displaying that information on tobacco products, on packages that contain tobacco products and on leaflets. 7 (1) A primary package may contain only a tobacco product, a lining and a leaflet. (2) A secondary package may contain only a primary package or other secondary package, as well as any overwrap covering those packages. 8 Every secondary package must have a rectangular cuboid shape when it is closed, having six surfaces that meet at right angles and edges that are rigid and straight, without any rounding or bevelling. 9 Except as otherwise provided by or under the Act, any other Act of Parliament or any Act of the legislature of a province, the interior and exterior surfaces of a primary package and of a secondary package must not display any brand element or any colour or information. 10 (1) Except as otherwise provided by these Regulations, every interior and exterior surface of a primary package and of a secondary package must be drab brown. (2) Other colours may be used on the interior and exterior surfaces to display a health warning or other information that is required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province, in accordance with the requirements imposed by or under that Act, other Act of Parliament or Act of the legislature of a province. (3) An interior surface of a primary package that is made of metal or wood may be the natural colour of the metal or wood. 11 (1) Except as otherwise provided by or under the Act, any other Act of Parliament or any Act of the legislature of a province, every interior and exterior surface of a primary package and of a secondary package must have a matte finish. (2) The interior surfaces and exterior surfaces of a primary package that is a pouch or soft package may have a glossy finish if those surfaces include a transparent film. 12 Any adhesive substance that is used on an interior or exterior surface of a primary package or of a secondary package or on any lining or overwrap must be transparent and colourless. 13 (1) Every interior and exterior surface of a primary package and of a secondary package, as well as any overwrap covering the package, must have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities. (2) However, a carton may include a perforated strip for opening that, once torn, may leave serrations on the carton’s interior and exterior surfaces. 14 (1) The interior and exterior surfaces of a primary package and of a secondary package, as well as any lining, leaflet and overwrap, must not include any feature that is designed to change the appearance (such as heat-activated ink) or to change the surface area (such as a fold-out panel) of the package, lining, leaflet or overwrap. (2) A primary package must be designed in such a manner that it may be opened by only one means when the package is used in the customary manner to gain access to the tobacco product. (3) A primary package must not be designed in such a manner that it forms an inner box that can be removed without being damaged. 15 (1) A primary package and a secondary package may display an alphanumeric code that is composed of no more than 10 numeric characters and either the abbreviation “CA” that represents Canada or one of the following internationally approved alpha codes that represents the province or territory where the product is sold: (a) in the case of Ontario, “ON”; (b) in the case of Quebec, “QC”; (c) in the case of Nova Scotia, “NS”; (d) in the case of New Brunswick, “NB”; (e) in the case of Manitoba, “MB”; (f) in the case of British Columbia, “BC”; (g) in the case of Prince Edward Island, “PE”; (h) in the case of Saskatchewan, “SK”; (i) in the case of Alberta, “AB”; (j) in the case of Newfoundland and Labrador, “NL”; (k) in the case of Yukon, “YT”; (l) in the case of the Northwest Territories, “NT”; and (m) in the case of Nunavut, “NU”. (2) The alphanumeric code may be displayed on a primary package and a secondary package if it is displayed in such a manner that the code (a) has a matte finish and is printed in a regular weight and width Lucida Sans Serif font style, without italics, and in black or gray; (b) is printed only once on the primary package and once on the secondary package, in characters of no more than 8 points; and (c) in the case of a package that has a rectangular cuboid shape when it is closed, is displayed on only the exterior surface of the top, bottom or any one of the sides of the package. (3) The alphanumeric code must not convey any information relating to characteristics of the tobacco product that the primary package or secondary package contains or the tobacco product’s emissions. (4) The alphanumeric code must not evoke the tobacco product’s brand elements. 16 (1) A primary package and a secondary package may display a bar code that is rectangular in shape, does not contain any image or design and is no more than 40 mm by 20 mm in size. (2) The bar code may be displayed on a primary package and a secondary package if it is displayed in such a manner that the code (a) has a matte finish and is printed in either black and white or in drab brown and white; (b) is displayed only once on the primary package and once on the secondary package; and (c) in the case of a package that has a rectangular cuboid shape when it is closed, is displayed on only the exterior surface of the top, bottom or any one of the sides of the package. 17 (1) The interior and exterior surfaces of a primary package and of a secondary package, as well as any lining, leaflet and overwrap, must not include any feature that is designed to permit access remotely to any promotion by a means of electronic communication. (2) The surfaces, lining, leaflet and overwrap may include a feature that is designed to permit access remotely to other types of information by a means of electronic communication if the feature becomes visible only through technological means or meets the requirements imposed by or under the Act, any other Act of Parliament or any Act of the legislature of a province. 18 (1) A feature that is designed to prevent counterfeiting may be displayed on an exterior surface of a primary package or of a secondary package if the feature (a) is required under an enactment of a foreign government; (b) is a QR code, DotCode or Data Matrix; (c) is rectangular in shape and does not contain any image or design; (d) is no more than 40 mm by 20 mm in size; (e) has a matte finish and is printed in either black and white or in drab brown and white; (f) is displayed only once on each package; and (g) in the case of a package that has a rectangular cuboid shape when it is closed, is displayed on only the exterior surface of the top, bottom or any one of the sides of the package. (2) For the purposes of this section, QR code, DotCode and Data Matrix have the same meanings as in Article 21 of the Commission Implementing Regulation (EU) 2018/574 of December 15, 2017 on Technical Standards for the Establishment and Operation of a Traceability System for Tobacco Products. 19 Calibration marks that are necessary for the automated manufacturing of a primary package or of a secondary package may be displayed on any of its interior or exterior surfaces, if those marks are not visible when the package is used in the customary manner to gain access to the tobacco product. 20 (1) The interior and exterior surfaces of a primary package and of a secondary package, as well as any lining, leaflet and overwrap, must not be capable of emitting a scent or sound. (2) However, the interior and exterior surfaces of a primary package and of a secondary package that are made of wood may emit the natural scent of the wood. 21 The interior and exterior surfaces of a primary package and of a secondary package must not include any cut-out window that permits the contents of the package to be visible without opening it. 22 (1) Subject to subsections (2) and (5), the interior and exterior surfaces of a primary package and of a secondary package must not include any sticker or tab. (2) The exterior surfaces of a primary package and of a secondary package may include an irremovable sticker that displays information that is required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province, if the sticker is placed on an exterior surface in such a manner that it does not conceal or obscure any such information on the package. (3) The sticker is deemed to form a part of the surface on which it is placed. (4) However, only the requirements of sections 9 to 12, subsections 13(1) and 14(1) and sections 17 and 20 apply to the sticker. (5) An interior and exterior surface of a primary package that is a pouch or a soft package may include a rectangular tab for resealing the package after opening if the tab (a) does not conceal or obscure any information required by or under the Act, any other Act of Parliament or any Act of the legislature of a province; and (b) does not display any brand element or any information. (6) Only the requirements of subsection 10(1) and sections 11 and 12, subsections 13(1), 14(1) and 17(1) and section 20 apply to the tab. (7) Any tab or sticker that covers any information required by or under the Act, any other Act of Parliament or any Act of the legislature of a province must be transparent and colourless. 23 Except as otherwise provided by these Regulations, any lining that is placed in a primary package must (a) be white or drab brown; (b) have a matte finish and no variations in colour tone; (c) not display any brand element or any information; and (d) have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities aside from embossed dots or squares that are required for the automated manufacturing process and that are uniform in size and equidistant. 24 Except as otherwise provided by these Regulations, any overwrap that covers a primary package or secondary package must (a) mould to the primary package or secondary package that it covers; (b) be transparent and colourless; (c) not include any tear tape; (d) not display any brand element; and (e) not display any information or features. 25 If an overwrap covers more than one primary package, the following information and features may be displayed on it: (a) calibration marks that meet the requirements of section 19; (b) a bar code, if it is displayed only once on the overwrap, meets the requirements of subsection 16(1) and paragraph 16(2)(a) and is printed directly on the overwrap or on a label that meets the requirements of subsections 11(1), 13(1) and 14(1) that are applicable to interior and exterior surfaces; (c) a solid black rectangle to cover the bar code on each primary package; (d) the declaration of net quantity and the common name of the tobacco product, printed in white on a black rectangle, if they are oriented parallel to and in the same direction as any information that is displayed on the surface that the overwrap covers; and (e) a health warning and any other information that is required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province. 26 An overwrap that covers a primary package or secondary package may include a single tear tape that (a) is made of plastic, is transparent and is either colourless or the colour required by or under an Act of the legislature of a province; (b) forms a straight line that has a uniform width of no more than 3.5 mm around the package or the width required by or under an Act of the legislature of a province; (c) is parallel to any straight edge of the package and perpendicular to the opening of the package; (d) is designed in such a manner that the entire overwrap is removed once the tear tape is torn; and (e) displays only information that is required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province. 27 (1) Except as otherwise provided by or under the Act, any other Act of Parliament or any Act of the legislature of a province, any text that is displayed on a primary package or secondary package, or on any overwrap covering the package, must have a matte finish and be printed in a regular weight and width Lucida Sans Serif font style, without italics, and in gray. (2) The space between every word that forms part of an expression must be no more than 4 mm. 28 A brand name that is not prohibited by the Act may be displayed in accordance with these Regulations on a primary package and a secondary package, if the brand name does not evoke a colour or a characteristic of a filter. 29 (1) In the case of a primary package or secondary package that has a rectangular cuboid shape when it is closed, the brand name may be displayed only once on each exterior surface of the front, back, top, bottom and sides of the package. (2) Subject to subsection (3), the brand name may be displayed only once on each of the following surfaces of a cylindrical primary package or secondary package: (a) the exterior surface of the top and bottom of the package; and (b) the exterior curved surface of the front and back of the package. (3) The brand name may be displayed only once on a cigar tube. (4) In the case of any other primary package or secondary package, the brand name may be displayed only once on each exterior surface of the package. 30 (1) Any brand name that is displayed on a primary package or secondary package must (a) be printed in alphabetic characters of 14 points; and (b) form only one line of text. (2) Only the first letter of each word in the brand name may be a capital letter. 31 (1) If a brand name is displayed on an exterior surface of a primary package or secondary package and a health warning is also displayed on that surface, the brand name must be oriented parallel to and in the same direction as the health warning and must be centered in the area of that surface that remains unoccupied by the health warning and any other information that is required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province. (2) If a brand name is displayed on an exterior surface of a primary package or secondary package, and no health warning is displayed on that surface, the brand name must be (a) oriented parallel to and in the same direction as any other information that is displayed on that surface and centered in the remaining area of that surface; or (b) centered on that surface, if no other information is displayed on it. (3) Subsections (1) and (2) do not apply to a cigar tube. 32 (1) The manufacturer’s identity and principal place of business may be displayed only once on every primary package and secondary package and must be printed in characters of 10 points. (2) In the case of a primary package or secondary package that has a rectangular cuboid shape when it is closed, the manufacturer’s identity and principal place of business may be displayed on the exterior surface of only one of the sides of the package. 33 In the case of any primary package or secondary package, other than a cylindrical package, the manufacturer’s identity and principal place of business must be oriented parallel to and in the same direction as any other information that is displayed on the same exterior surface. 34 (1) The declaration of net quantity and the common name of a tobacco product may be displayed on every primary package and secondary package. (2) The declaration of net quantity and the common name of a tobacco product may be displayed only once on each principal display panel, as defined in subsection 2(2) of the Consumer Packaging and Labelling Regulations. 35 (1) If the declaration of net quantity and the common name of a tobacco product are displayed on an exterior surface of a primary package or of a secondary package and a health warning is also displayed on that surface, the declaration and the common name must be oriented parallel to and in the same direction as the health warning. (2) If the declaration of net quantity and the common name of the tobacco product are displayed on an exterior surface of a primary package or of a secondary package and no health warning is displayed on that surface, the declaration and the common name must be oriented parallel to and in the same direction as any other information that is displayed on that surface. 36 In the case of a primary package or secondary package that has a rectangular cuboid shape when it is closed, the declaration of net quantity and the common name of the tobacco product must be displayed in such a manner that the last letter of that information is 5 mm from the bottom and right edges of the package. 37 (1) The declaration of net quantity and the common name of the tobacco product must be printed in characters whose height is no more than the minimum height of the numerical quantity in the declaration of net quantity set out in subsection 14(2) of the Consumer Packaging and Labelling Regulations. (2) For the purposes of this section, height has the meaning assigned by subsection 14(1) of the Consumer Packaging and Labelling Regulations. 38 (1) Except as otherwise provided by or under the Act or any other Act of Parliament, a leaflet must have a matte finish and the text that is displayed on it must be printed in a regular weight and width Lucida Sans Serif font style, without italics, and in either black on a white background or gray on a drab brown background. (2) A brand name that is not prohibited by the Act may be displayed on a leaflet in accordance with this section, if the brand name does not evoke a colour or a characteristic of a filter. (3) Subject to subsection 17(2), a leaflet must not display any image other than one that warns consumers of the health hazards arising from the use of the tobacco product or that provides instructions for its use. (4) Any statement respecting a risk arising from the use of the tobacco product may be printed in red. 39 Every primary package that contains cigarettes must have a rectangular cuboid shape when it is closed, having six surfaces that meet at right angles and edges that are rigid and straight, without any rounding or bevelling. 40 A primary package that contains cigarettes must be a slide and shell package. 41 A slide and shell package must meet the following requirements: (a) the only way to open it is by moving the slide vertically; and (b) the edges of its upper slide-flap and lower slide-flap must be rigid and straight, without any rounding or bevelling, except at the corners that are concealed by the shell when the package is closed. 42 (1) A slide and shell package that contains regular size cigarettes must have the following dimensions when it is closed: (a) a height of no less than 72 mm and no more than 77 mm; (b) a width of no less than 81 mm and no more than 106 mm; and (c) a depth of no less than 15 mm and no more than 18 mm. (2) A slide and shell package that contains king size cigarettes must have the following dimensions when it is closed: (a) a height of no less than 84 mm and no more than 89 mm; (b) a width of no less than 81 mm and no more than 106 mm; and (c) a depth of no less than 15 mm and no more than 18 mm. 42.1 (1) The upper slide-flap of a slide and shell package that contains regular size cigarettes must have the following dimensions: (a) a height of 51 mm; and (b) a width of no less than 80 mm and no more than 105 mm. (2) The upper slide-flap of a slide and shell package that contains king size cigarettes must have the following dimensions: (a) a height of 62 mm; and (b) a width of no less than 80 mm and no more than 105 mm. (3) The width of the upper slide-flap of a slide and shell package must be equal to the width of the slide. 43 (1) Every primary package and secondary package that contains cigarettes must be made of rigid cardboard. (2) However, a carton may be made of paper. (3) An overwrap that meets the requirements of sections 24 to 26 may be used, instead of a carton, to cover two or more primary packages that contain cigarettes. 44 Any lining that is placed in a primary package that contains cigarettes must (a) be made of one sheet of silver-coloured foil or paper that is attached to white backing paper and to an interior surface of the primary package in such a manner that it cannot be removed without being damaged; and (b) meet the requirements of paragraphs 23(b) to (d). 45 (1) The declaration of the size of cigarettes as regular size or king size may be displayed on the exterior surface of the front and back of a primary package and of a secondary package. (2) The declaration of the size of cigarettes must be identified by the words “Regular Size” or their abbreviation “RS” or the words “King Size”or their abbreviation “KS”, as the case may be, and be printed in alphabetic characters of 10 points, oriented parallel to and in the same direction as the health warning and positioned in such a manner that the first letter of the declaration is 5 mm from the bottom and left edges of the primary package or secondary package. 46 (1) Every primary package that contains little cigars must have a rectangular cuboid shape when it is closed, having six surfaces that meet at right angles and edges that are rigid and straight, without any rounding or bevelling. (2) However, a primary package that is made of metal and contains little cigars — and any carton that contains such a primary package — may have rounded or beveled corners. 47 (1) Every primary package that contains little cigars must be made of rigid cardboard or metal. (2) Every secondary package must be made of rigid cardboard. (3) However, a carton may be made of paper. (4) An overwrap that meets the requirements of sections 24 to 26 may be used, instead of a carton, to cover two or more primary packages that contain little cigars. 48 Any lining that is placed in a primary package that contains little cigars must (a) be made of one sheet of silver-coloured foil that is attached to white backing paper and to an interior surface of the package in such a manner that it cannot be removed without being damaged; and (b) meet the requirements of paragraphs 23(b) to (d). 49 Despite these Regulations, a package is considered to be a primary package if it is intended for retail sale in Canada and cigars that are individually covered by overwrap are directly placed in it. 50 (1) An overwrap that covers one cigar and an overwrap in which two or more cigars are placed must mould to the cigars and meet the requirements of paragraphs 24(b) to (d). (2) The information and features referred to in section 25 may be displayed on an overwrap in which two or more cigars are placed. (3) Subject to subsections (4) and (5), the interior and exterior surfaces of an overwrap in which two or more cigars are placed must not include any sticker. (4) An exterior surface of an overwrap in which two or more cigars are placed may include an irremovable sticker that displays information required or authorized by or under the Act, any other Act of Parliament or any Act of the legislature of a province, if the sticker is placed on the overwrap in such a manner that it does not conceal or obscure any such information on the overwrap. (5) The requirements of section 9, subsections 10(1) and (2), sections 11 and 12, subsections 13(1) and 14(1), section 17 and subsection 20(1) that are related to interior and exterior surfaces apply to the sticker. 51 An overwrap that meets the requirements of sections 24 to 26 may be used, instead of a carton, to cover two or more primary packages that contain cigars. 52 Any lining that is placed in a primary package that contains cigars must (a) have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities, unless such features are necessary to hold the cigar in place or to remove it from the lining; and (b) meet the requirements of paragraphs 23(a) to (c). 53 Despite these Regulations, a package is considered to be a primary package if it is intended for retail sale in Canada and a device that is necessary for the use of a tobacco product and that is covered by an overwrap is directly placed in it or a part that may be used with such a device and that is covered by an overwrap is directly placed in it. 54 Every primary package that contains a device that is necessary for the use of a tobacco product, or a part that may be used with such a device, must have a rectangular cuboid shape when it is closed, having six surfaces that meet at right angles and edges that are rigid and straight, without any rounding or bevelling. 55 (1) Any overwrap that covers a device that is necessary for the use of a tobacco product, or a part that may be used with such a device, must mould to the device or part and meet the requirements of paragraphs 24(b) to (d). (2) If an overwrap covers more than one device that is necessary for the use of a tobacco product or more than one part that may be used with such a device, the information and features referred to in section 25 may be displayed on the overwrap. 56 Any lining that is placed in a primary package that contains a device that is necessary for the use of a tobacco product, or a part that may be used with such a device, must (a) be made of plastic or rigid cardboard; (b) have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities, unless such features are necessary to hold the device or part in place or to remove it from the lining; and (c) meet the requirements of paragraphs 23(a) to (c). 57 The exterior surfaces of a primary package and of a secondary package that contains a device that is necessary for the use of a tobacco product, or a part that may be used with such a device, may display instructions for the safe handling or storage of the device or part if the instructions (a) do not contain any promotion, image or design; (b) are printed in characters of 10 points; (c) are displayed, in both English and French, only once on the primary package and once on the secondary package; (d) are displayed only on the exterior surface of any side of the package; and (e) are oriented parallel to and in the same direction as any other information that is displayed on the same exterior surface of the package. 58 Every primary package that contains a tobacco product that is made in whole or in part of tobacco and intended for use with a device that is necessary for the use of that product must have a rectangular cuboid shape when it is closed, having six surfaces that meet at right angles and edges that are rigid and straight, without any rounding or bevelling. 59 Any lining that is placed in a primary package that contains a tobacco product that is made in whole or in part of tobacco and intended for use with a device that is necessary for the use of that product must (a) have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities, unless such features are necessary to hold the product in place or to remove it from the lining; and (b) meet the requirements of paragraphs 23(a) to (c). 60 (1) If a manufacturer of a tobacco product furnishes a package so that a tobacco product may be directly placed in it after the product’s retail sale in Canada, the package must meet the requirements of these Regulations that apply to a primary package that contains the tobacco product, other than the requirements of subsection 14(3) and sections 23 and 32 to 37. (2) Despite subsection (1), if a manufacturer of a tobacco product furnishes a bag so that a tobacco product, primary package or secondary package may be placed in it after the tobacco product, primary package or secondary package is sold at retail in Canada, the bag must meet the requirements of (a) section 9; (b) subsections 10(1) and (2); (c) sections 11 and 12; (d) subsection 13(1); (e) subsection 14(1); (f) section 15; (g) subsection16(1) and paragraph 16(2)(a); (h) sections 17 to 19; (i) sections 20 and 21; (j) subsections 22(1) to (4) and (7); (k) sections 27 and 28; (l) subsection 29(4); (m) section 30; and (n) subsection 31(2). 61 Subject to section 62, every tobacco product that is made of tobacco that is rolled in paper or in a wrapper composed of reconstituted tobacco must have a smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities. 62 A filter may have holes or recesses that are not visible. 63 (1) A tobacco product may display an alphanumeric code described in subsection 15(1), printed in black or gray. (2) For the purposes of subsection 5.3(3) of the Act, black and gray colouring agents used to display the alphanumeric code on a tobacco product are prescribed additives. (3) The alphanumeric code must (a) be printed only once on the tobacco product, in characters of no more than 8 points; (b) have a matte finish and be printed in a regular weight and width Lucida Sans Serif font style, without italics; (c) in the case of cigarettes that have tipping paper, little cigars, cigars and tobacco products that are made in whole or in part of tobacco, rolled in paper and intended for use with a device, be oriented parallel to and displayed no more than 38 mm from the end of the tobacco product that is not designed to be lit or heated; (d) in the case of cigarettes that do not have tipping paper, be oriented parallel to and displayed no more than 38 mm from the end of the cigarette that is closest to the health warning’s display area; and (e) be positioned in such a manner that it does not obscure or conceal any health warning, or any attribution referred to in subsection 83(1), that is displayed on the tobacco product. (4) Despite paragraph (3)(a), instead of being printed on a cigar, the alphanumeric code may be printed on a cigar band that meets the requirements of subsection 71(4) if the code is displayed only once on the band and is printed in characters of no more than 10 points. (5) The alphanumeric code must not convey any information relating to characteristics of the tobacco product or its emissions. (6) The alphanumeric code must not evoke the tobacco product’s brand elements. 64 (1) A tobacco product must not include any feature that is designed to permit access remotely to any promotion by a means of electronic communication. (2) The tobacco product may include a feature that is designed to permit access remotely to other types of information by a means of electronic communication if the feature becomes visible only through technological means or meets the requirements imposed by or under the Act, any other Act of Parliament or any Act of the legislature of a province. 65 Cigarettes must have a diameter of no less than 7.65 mm and no more than 8.0 mm and must be (a) no less than 70.0 mm and no more than 73.0 mm in length, in the case of regular size cigarettes; and (b) no less than 82.0 mm and no more than 85.0 mm in length, in the case of king size cigarettes. 66 A cigarette must meet the following requirements: (a) the part of its filter, if any, that is visible under normal conditions of use must be white; (b) the paper that it is made of must be white and have a matte finish; and (c) its tipping paper must have a matte finish and be white or imitate a cork pattern. 67 Despite section 61, the paper that a cigarette is made of, including any tipping paper, may have ventilation holes that do not form any word, image or design. 68 Little cigars must have a diameter of no less than 7.0 mm and no more than 8.5 mm. 69 A little cigar must meet the following requirements: (a) its mouthpiece or tip must have a matte finish and be white or drab brown; (b) the part of its filter, if any, that is visible under normal conditions of use must be white; and (c) its tipping paper must have a matte finish and be white or drab brown, or imitate a cork pattern. 70 A cigar must meet the following requirements: (a) any mouthpiece or tip must have a matte finish and be white or drab brown; and (b) any tipping paper must have a matte finish and be drab brown. 71 (1) The following information may be displayed on a cigar if it is displayed on a band that is fitted around the circumference of the cigar and meets the requirements of this section: (a) a brand name that is not prohibited by the Act, if the brand name does not evoke a colour or a characteristic of a filter; (b) the manufacturer’s identity and principal place of business; and (c) the name of the country in which the cigar was manufactured. (2) The information referred to in subsection (1) may be displayed only once on the band and must (a) have a matte finish and be printed in a regular weight and width Lucida Sans Serif font style, in characters of no more than 10 points, without italics, and in gray; and (b) be displayed horizontally along the length of the band such that the text runs around the circumference of the cigar. (3) A bar code may be displayed only once on the band and must meet the requirements of subsection 16(1) and paragraph 16(2)(a). (4) The band must be drab brown and have a matte finish and smooth texture, without any raised features, embossing, decorative ridges, bulges or other irregularities. 72 (1) The band referred to in section 71 may be placed over another band that does not meet the requirements of these Regulations if it completely covers the other band and is attached to it by adhesive and in such a manner that it cannot be removed without the other band being damaged. (2) A band need not meet the requirements of these Regulations if it is completely covered, in accordance with subsection (1), by the band referred to in section 71. 73 (1) The requirements of section 66 apply to a tobacco product that is made in whole or in part of tobacco, rolled in paper and intended for use with a device. (2) A tobacco product that is made in whole or in part of tobacco and intended for use with a device but that is not rolled in paper must have a matte finish and be drab brown. 74 Despite section 61, any paper in which a tobacco product that is intended for use with a device is rolled, including any tipping paper, may have ventilation holes that do not form any word, image or design. 75 Except as otherwise provided by or under the Act, any other Act of Parliament or any Act of the legislature of a province, the surfaces of a device that is necessary for the use of a tobacco product and of the parts that may be used with the device need not be the natural colour of the materials of which they are made. 76 (1) Except as otherwise provided by or under the Act, any other Act of Parliament or any Act of the legislature of a province, a marking that is not a promotion may be displayed on a device that is necessary for the use of a tobacco product and on a part that may be used with the device. (2) However, a brand name that is not prohibited by the Act may be displayed on a device and on a part that may be used with the device if the brand name does not evoke a colour or a characteristic of a filter. 77 The part of a filter that is visible when the filter is used with a tobacco product under normal conditions of use must be white. 78 The requirements of paragraphs 66(a) to (c) apply to a tube that is intended for use with a tobacco product. 79 (1) Any paper — other than tipping paper — that is intended for use with a tobacco product must have a matte finish and be white. (2) Despite section 61, the paper may have ventilation holes that do not form any word, image or design. 80 Any thread around the circumference of a bidi must be black. 81 The following definitions apply in this Part. health information message, in respect of a tobacco product, means the applicable health information message referred to in subsection 94(1). (message d’information sur la santé) labelling element, in respect of a tobacco product, means (a) a health warning described in section 87, a health information message described in section 92 or the toxicity information described in section 99 that is displayed on a package or leaflet; and (b) a health warning described in section 117 that is displayed directly on a tobacco product referred to in that section. (élément d’étiquetage) source document means the document that sets out labelling elements, as well as the attribution of those labelling elements, entitled Labelling Elements for Tobacco Products, as amended from time to time and published by the Government of Canada in print and electronic form. (document source) toxicity information, in respect of a tobacco product, means the applicable toxicity information referred to in subsection 100(1). (information sur la toxicité) year means a period of 12 consecutive months beginning on the day on which section 89 comes into force or any subsequent anniversary of that day. (année) 82 (1) A manufacturer must obtain from the Minister, in the form of electronic files, the labelling elements and the attribution of the labelling elements, as set out in the source document, and display the labelling elements on tobacco products, packages or leaflets. (2) Subject to the other provisions of this Part, a manufacturer must display labelling elements on tobacco products, packages and leaflets in the same manner as they are presented in the source document published in print form. 83 (1) If a manufacturer attributes a labelling element contained in an electronic file, they must do so by displaying the phrase “Health Canada” with the English version of the labelling element and the phrase “Santé Canada” with the French version of the labelling element. (2) Subject to the other provisions of this Part, a manufacturer must display the attribution of a labelling element on tobacco products, packages and leaflets in the same manner as it is presented in the source document published in print form. 84 The text of labelling elements and attributions that are displayed on a tobacco product, package or leaflet must be legible and displayed in both official languages in the same manner. 85 Labelling elements that are displayed on a tobacco product, package or leaflet must be irremovable. 86 Labelling elements and attributions that are displayed on a tobacco product, package or leaflet must be printed (a) with the greatest clarity possible taking into consideration the printing method used; and (b) in colours that are as close as possible to the colours in which the labelling element and attribution are set out in the source document published in print form. 87 (1) Every primary package and every secondary package that contains a tobacco product, other than papers and filters intended for use with a tobacco product, must display a health warning that consists of three or more of the following components: (a) an image; (b) a warning header; (c) the explanatory text of the warning or related information; and (d) a message about tobacco cessation and the pan-Canadian toll-free telephone number and Government of Canada web address relating to tobacco cessation. (2) Every overwrap in which two or more cigars are placed must also display a health warning that consists of three or more of the components referred to in subsection (1). 88 (1) The health warnings that are required for a tobacco product and must be displayed on packages are the health warnings set out for that type of product in the following Sections of the source document: (a) in the case of cigarettes, Section A; (b) in the case of little cigars, Section B; (c) in the case of cigarette tobacco and tubes, Section C; (d) in the case of cigars, Section D; (e) in the case of pipe tobacco, Section E; (f) in the case of chewing tobacco and snuff, Section F; (g) Section G, in the case of (i) tobacco products that are made in whole or in part of tobacco and intended for use with devices that are necessary for the use of those tobacco products, (ii) devices referred to in subparagraph (i), and (iii) parts that may be used with those devices; (h) in the case of water pipe tobacco, Section H; and (i) in the case of other tobacco products that are made in whole or in part of tobacco, Section I. (2) The health warnings that are set out in the source document for each type of tobacco product must be used in rotation, beginning on the day on which these Regulations come into force, with each of the rotations set out in the source document being applicable during the following periods: (a) in the case of cigarettes, little cigars, cigarette tobacco and tubes, 24 months; and (b) in the case of any other type of tobacco product, 36 months. (3) Despite paragraph (2)(a), in the case of cigarettes, little cigars, cigarette tobacco and tubes, the first rotation of health warnings applies during the period that begins on the day on which these Regulations come into force and ends on July 31, 2026. (4) The health warnings set out in a rotation in the source document may be used during the period of 90 days before the day on which that rotation applies in accordance with subsection (2). (5) Despite paragraph (2)(b), if a new rotation of health warnings becomes applicable in respect of a type of tobacco product referred to in that paragraph that is sold, by a retailer, in a package that displays a health warning of the preceding rotation, the preceding rotation continues to apply. 89 Every manufacturer must, to the extent possible, use each health warning set out in each applicable rotation of health warnings in the source document in respect of an equal number of each type of package of each brand name of tobacco products that they package in a year. 90 (1) A health warning must be displayed on the following display areas: (a) in the case of a primary package that has a rectangular cuboid shape when it is closed, (i) the exterior surface of the front and back of the primary package, or (ii) the exterior surface of the top of the primary package, if the total surface area of the exterior surface of the front and back is less than or equal to the surface area of the exterior surface of the top; (b) in the case of a cylindrical primary package that contains cigarette tobacco, each portion of the surface area of the package that (i) forms the exterior curved surface, around the circumference of the primary package, and makes up the exterior surface of the front or back of the package, (ii) extends from the top edge to the bottom edge, and (iii) forms a rectangle when projected on a flat plane; (c) in the case of a cylindrical primary package that is a cigar tube, the exterior curved surface of the cigar tube; (d) in the case of any other cylindrical primary package, the exterior surface of the top of the package; (e) in the case of a primary package that is a pouch or soft package, the exterior surface of the front of the package; (f) in the case of any other primary package, (i) the exterior surface of the front and back of the primary package, or (ii) the exterior surface of the top of the primary package, if the total surface area of the exterior surface of the front and back is less than or equal to the surface area of the exterior surface of the top; (g) in the case of a secondary package that is a carton, the four largest exterior surfaces of the carton; and (h) in the case of an overwrap, the exterior surface of the front of the overwrap. (2) The health warning and any attribution of the health warning must occupy at least the following portions of the display area of a package: (a) in the case of a primary package that contains cigarettes, little cigars or cigarette tobacco, 75% of the display area; (b) in the case of a primary package that contains cigars, other than a cigar tube, or a primary package that contains pipe tobacco, chewing tobacco or snuff, the greater of (i) 75% of the display area, and (ii) an area of 4 000 mm2; (c) in the case of a primary package that is a cigar tube, the portion that constitutes 50% of the display area around the circumference of the cigar tube and 95% of the length of the display area, measured from the edge of the lid of the cigar tube; (d) in the case of a primary package that contains any other tobacco product, the greater of (i) 75% of the display area, and (ii) an area of 2 500 mm2; (e) in the case of a secondary package that is a carton, 75% of the display area; and (f) in the case of an overwrap, (i) an area of 4 500 mm2, if the display area is no more than 9 000 mm2 in size, (ii) an area of 6 800 mm2, if the display area is more than 9 000 mm2 and no more than more than 12 000 mm2 in size, (iii) an area of 9 000 mm2, if the display area is more than 12 000 mm2 and no more than more than 18 000 mm2 in size, (iv) an area of 13 500 mm2, if the display area is more than 18 000 mm2 and no more than more than 27 000 mm2 in size, and (v) the greater of 50% of the display area and an area of 20 250 mm2, if the display area is more than 27 000 mm2 in size. 91 (1) Health warnings must be displayed on packages in both official languages in such a manner that (a) in the case of a health warning that must be displayed on two display areas of a primary package, the English version is on one display area and the French version is on the other; (b) in the case of a health warning that must be displayed on one display area of a primary package, the English and French versions are side by side; (c) in the case of two health warnings that must be displayed on four display areas of a secondary package that is a carton, the two health warnings are displayed as follows: (i) the English version of one health warning is on the display area on the front or back of the carton and the French version is on the display area on the front or back that remains unoccupied by the English version, and (ii) the English version of the other health warning is on one of the display areas of the carton that remains unoccupied by the health warning referred to in subparagraph (i) and the French version is on the other display area that remains unoccupied by the health warning referred to in that subparagraph; and (d) in the case of a health warning that must be displayed on one display area of an overwrap, the English and French versions are side by side. (2) The health warnings must be positioned parallel to and as close as possible to the top edge of the package or to the hinge opening, depending on the type of package. (3) Despite subsection (2), in the case of a cigar tube, the health warning must be positioned perpendicular to the edge of the lid of the cigar tube. (4) The health warnings must be displayed on packages in one of the following formats: (a) if the height-to-width ratio of the portion of a display area on which a health warning must be displayed is less than 1, the “Landscape” format; (b) if that ratio is more than 1, the “Portrait” format; (c) if that ratio is equal to 1, the “Square” format. 92 (1) Every primary package that contains cigarettes or cigarette tobacco must display a health information message that consists of the following components: (a) an image; (b) the explanatory text of the message or related information; and (c) the pan-Canadian toll-free telephone number and Government of Canada web address relating to tobacco cessation. (2) However, in the case of small primary package that contains cigarette tobacco and whose dimensions do not allow the health information message to be displayed on the package, on the applicable display area described in paragraph 96(1)(b) or (c), the health information message must be displayed on a leaflet that is at least 80 mm by 53 mm in size and is inserted in the package. 93 A health information message consisting of the components referred to in subsection 92(1) must be displayed on a leaflet that is at least 65 mm by 43 mm in size and is inserted in every primary package that contains little cigars. 94 (1) The health information messages that are required for a tobacco product are the health information messages set out for that type of tobacco product in the following Sections of the source document: (a) in the case of cigarettes, Section A; (b) in the case of little cigars, Section B; and (c) in the case of cigarette tobacco, Section C. (2) The health information messages that are set out in the source document for each type of tobacco product referred to in subsection (1) must be used in rotation, beginning on the day on which these Regulations come into force, with each of the rotations set out in the source document being applicable during a period of 24 months. (3) Despite subsection (2), the first rotation of health information messages applies during the period that begins on the day on which these Regulations come into force and ends on July 31, 2026. (4) The health information messages set out in a rotation in the source document may be used during the period of 90 days before the day on which that rotation applies in accordance with subsection (2). 95 Every manufacturer must, to the extent possible, use each health information message set out in each applicable rotation of health information messages in the source document in respect of an equal number of each type of primary package of each brand name of cigarettes, little cigars and cigarette tobacco that they package in a year. 96 (1) A health information message must be displayed on a primary package on the following display areas: (a) in the case of a slide and shell package that contains cigarettes, the exterior surface of the upper slide-flap that is visible when the slide and shell package is used in the customary manner to gain access to the cigarettes; (b) in the case of a cylindrical primary package that contains cigarette tobacco, (i) any portion of the exterior curved surface that remains unoccupied by a health warning, (ii) a removable leaflet that is placed on the interior surface of the lid of the primary package and is in the form of a disc that has a cut-out in its centre, or (iii) the freshness seal of the primary package; (c) in the case of a primary package that has a rectangular cuboid shape when it is closed and that contains cigarette tobacco, any exterior surface that remains unoccupied by a health warning, other than the exterior surface of the bottom; (d) in the case of a primary package that contains cigarette tobacco and that is a pouch or a soft package with a closure that is a longitudinal flap, the interior surface of the flap; and (e) in the case of any other primary package that contains cigarette tobacco, the largest exterior surface of the package that remains unoccupied by a health warning. (2) A portion of the surface of the removable leaflet referred to in subparagraph (1)(b)(ii) may extend beyond the edge of the disc if the extended surface displays the phrases set out in subsection 97(2). (3) The health information message and any attribution of the health information message must occupy the following portions of the display area: (a) in the case of a slide and shell package that contains cigarettes, the entire exterior surface of the upper slide-flap that is visible when the slide and shell package is used in the customary manner to gain access to the cigarettes; (b) in the case of a cylindrical primary package that contains cigarette tobacco, (i) for the exterior curved surface, an area of at least 4 240 mm2, (ii) for a removable leaflet referred to in subparagraph (1)(b)(ii), an area of at least 5 650 mm2, and (iii) for the freshness seal referred to in subparagraph (1)(b)(iii), an area of at least 7 850 mm2; and (c) in the case of any other primary package that contains cigarette tobacco, an area of at least 4 240 mm2. 97 (1) Health information messages must be displayed on primary packages in both official languages in such a manner that (a) in the case of a display area other than a removable leaflet referred to in subparagraph 96(1)(b)(ii), the English and French versions are side by side; and (b) in the case of a removable leaflet referred to in subparagraph 96(1)(b)(ii), the English version is displayed on one side and the French version on the other. (2) The extended surface of the removable leaflet referred to in subparagraph 96(1)(b)(ii) may display the phrase “FRANÇAIS AU VERSO” in the English version and the phrase “ENGLISH ON OTHER SIDE” in the French version, printed in a regular weight and width Lucida Sans Serif font style, in characters of 9 points, in black upper case letters, without italics and in bold type. (3) A health information message that is displayed on the display area of a primary package that contains cigarette tobacco must be (a) in the case of a display area on a pouch or soft package, centered in the display area and positioned parallel and as close as possible to the top edge of the longitudinal flap; and (b) in the case of a display area other than one referred to in paragraph (a) or subparagraph 96(1)(b)(ii) or (iii), centered in the display area and positioned parallel and as close as possible to the top edge of the primary package. (4) If a health information message is displayed on a display area of a primary package on which a health warning is also displayed, the health information message must be oriented parallel to and in the s

    The text continues in the official source.

    Related guides, FAQ and contract templates