LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2016-193:en

    SOR-2016-193:en — Surface Coating Materials Regulations

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 The following definitions apply in these Regulations. accessible part means any part of a product that may be touched, licked, mouthed or swallowed during the reasonably foreseeable use of the product. (partie accessible) container means a container in which a surface coating material is sold to a consumer. (contenant) display panel means any part of a container on which the common or generic name of a surface coating material, or the description of its function, is displayed. (aire d’affichage) good laboratory practices means practices that are in accordance with the principles set out in the Organisation for Economic Co-operation and Development document entitled OECD Principles of Good Laboratory Practice, Number 1 of the OECD Series on Principles of Good Laboratory Practice and Compliance Monitoring, ENV/MC/CHEM(98)17, the English version of which is dated January 21, 1998 and the French version of which is dated March 6, 1998. (bonnes pratiques de laboratoire) surface coating material means a paint or other similar material, with or without pigment, that forms a solid film after it is applied to a surface and that can be removed. (revêtement) 2 (1) A surface coating material must not contain more than 90 mg/kg total lead when a dried sample is tested in accordance with a method that conforms to good laboratory practices. (2) Subsection (1) does not apply to a surface coating material that is used (a) as an anti-corrosive or anti-weathering coating on the interior or exterior surface of a building having an agricultural purpose or on equipment having an agricultural purpose; (b) as an anti-corrosive or anti-weathering coating on a structure, other than a building, having an agricultural or public purpose; (c) as a touch-up coating on metal surfaces; (d) in the production of outdoor graphic art, including billboard displays; or (e) in an art, craft or hobby activity, except if the surface coating material is used by children. 3 (1) Subject to subsections (2) and (3), if a surface coating material that is used for a purpose mentioned in subsection 2(2) contains more than 90 mg/kg total lead, the display panel on the container must contain the following warning, or its equivalent, with the italicized portion being replaced by the applicable uses: DANGER CONTAINS LEAD / CONTIENT DU PLOMB DO NOT APPLY TO SURFACES ACCESSIBLE TO CHILDREN OR PREGNANT WOMEN / NE PAS APPLIQUER SUR UNE SURFACE ACCESSIBLE AUX ENFANTS OU AUX FEMMES ENCEINTES Must be used exclusively [Insert the applicable uses mentioned in subsection 2(2)]. / Utiliser uniquement aux fins suivantes : [insérer les fins mentionnées au paragraphe 2(2) qui s’appliquent]. (2) Subject to subsection (3), if the area of the display panel is less than 35 cm2, the display panel may contain only the following warning: DANGER CONTAINS LEAD / CONTIENT DU PLOMB (3) If the warning required by subsection (1) or (2) is displayed in separate English and French display panels, the signal word “DANGER” must be displayed in each display panel, but if the warning is displayed in one bilingual display panel, the signal word “DANGER” need only be displayed once. 4 (1) The warning required by section 3 must appear in (a) a permanent, clear and legible manner; (b) capital letters, except for the portion dealing with uses in the warning under subsection 3(1); (c) bold-face or medium-face sans serif type; and (d) type having the minimum height and size set out in columns 2 and 3 of the table to this subsection according to the display panel area set out in column 1. (2) In the calculation of the area of a display panel, any seam and any convex or concave surface at the top or bottom of the container are to be excluded. (3) In the case of a container that is curved in any way, other than a bag, the display panel area is 40% of the total area of the container, excluding the top and bottom. (4) For the purpose of paragraph (1)(d), the minimum height of type is determined by measuring an upper case letter or a lower case letter that has an ascender or descender, such as “b” or “p”. 5 A surface coating material must not contain more than 10 mg/kg total mercury when a dried sample is tested in accordance with a method that conforms to good laboratory practices. 6 A sticker, film or other similar material that can be removed, or a surface coating material, that is applied to an accessible part of the following products must not contain more than 90 mg/kg total lead when it is tested in accordance with a method that conforms to good laboratory practices: (a) furniture; (b) products for children; (c) pencils; and (d) artist brushes. 7 [Repeal] 8 These Regulations come into force on the day on which they are registered.

    Related guides, FAQ and contract templates