Beta
SOR-2013-211:en
SOR-2013-211:en — Explosives Regulations, 2013
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI1 This Part sets out the scheme and application of these Regulations and exempts some explosives from provisions of the Explosives Act. It also defines certain terms that are used in the Regulations, including “explosives”.
4 (1) These Regulations are divided into 20 Parts. Some Parts apply to all explosives and some apply only to specific types of explosive. The final Part applies to restricted components.
(2) Part 2 sets out the general requirements, prohibitions and safety precautions that apply to every person who is carrying out an activity involving an explosive or is in the vicinity of an explosive.
(3) Part 3 indicates how to obtain an authorization of an explosive, how an authorized explosive is classified, how to obtain permission to change an authorized explosive, when an authorization may be cancelled and when an authorized explosive must be recalled.
(4) Part 4 indicates how to obtain a permit to import or export explosives or to transport them in transit and sets out the requirements for carrying out those activities.
(5) Part 5 indicates how to obtain a factory licence or manufacturing certificate and sets out the circumstances in which explosives may be manufactured without a licence or certificate. It also sets out the requirements for manufacturing explosives.
(6) Part 6 indicates how to obtain a magazine licence and sets out the requirements for storing explosives in a licensed magazine.
(7) Part 7 sets out the terms and conditions that apply to all holders of licences, permits and certificates, indicates how to obtain an amendment or renewal and sets out the circumstances in which a licence, permit or certificate may be suspended or cancelled.
(8) Part 8 sets out the screening and supervision requirements that apply to people who have, or could have, access to high risk explosives.
(9) Part 9 sets out the requirements for transporting explosives, including transporting them in transit.
(10) Parts 10 to 15 set out the requirements for the acquisition, storage and sale of the following types of explosives:
(a) military explosives and law enforcement explosives – Part 10;
(b) industrial explosives – Part 11;
(c) blank cartridges for tools – Part 12;
(d) special purpose explosives – Part 13;
(e) small arms cartridges, propellant powder and percussion caps – Part 14; and
(f) model, high-power and advanced high-power rocket motors – Part 15.
Part 14 also authorizes, and sets out requirements for, the manufacture of small arms cartridges and black powder cartouches.
(11) Parts 16 to 18 set out the requirements for the acquisition, storage, sale and use of the following types of fireworks:
(a) consumer fireworks – Part 16;
(b) special effect pyrotechnics – Part 17; and
(c) display fireworks, including firecrackers – Part 18.
Parts 17 and 18 also indicate how to obtain a fireworks operator certificate.
(12) Part 19 sets out the fees to be paid for obtaining an authorization, permit, licence or certificate.
(13) Part 20 restricts the sale and acquisition of certain components of explosives and sets out requirements for their sale and storage.
5 (1) These Regulations apply to all explosives except the following, to which only Part 5 applies:
(a) safety and strike-anywhere matches;
(b) life-saving devices (for example, signals, flares and parachute release devices) that are being carried in an aircraft, train, vessel or vehicle as equipment that is necessary for its safe operation or for the safety of its occupants;
(c) explosives classified as UN 3268 by the competent authority of their country of origin under the Model Regulations on the Transport of Dangerous Goods, published by the United Nations;
(d) explosives diluted to less than 1% by weight, including diluted explosives used as reagents (for example, 1H-tetrazole), training kits for sniffer dogs and kits to test the functioning of machines that detect trace levels of explosives; and
(e) Christmas crackers containing less than 2 mg of explosive substance.
(2) Paragraphs 6(b) to (d) and subsections 9(2) and (3) of the Explosives Act do not apply to the explosives set out in subsection (1).
(3) Paragraph 6(e) and section 20 of the Explosives Act do not apply to the explosives set out in paragraphs (1)(a), (b), (d) and (e).
(4) Section 21 of the Explosives Act applies to the explosives set out in subsection (1) only in respect of the activities referred to in paragraph 6(a) of that Act, and to the explosives set out in paragraph 1(c) only in respect of the activities referred to in paragraph 6(e) of that Act.
(5) Explosives that are under the control of any armed forces that are cooperating with the Canadian Forces are deemed to be under the direction or control of the Minister of National Defence.
6 (1) For the purposes of section 2 of the Explosives Act and these Regulations, explosive includes
(a) an explosive substance or explosive article that is not manufactured or used to produce an explosion, detonation or pyrotechnic effect but is included in Class 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations;
(b) any substance numbered UN 1442, AMMONIUM PERCHLORATE as set out in columns 1 and 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations;
(b.1) any substance numbered UN 3375, AMMONIUM NITRATE EMULSION, GEL, OR SUSPENSION, intermediate for blasting explosives, as set out in columns 1 and 2 of Schedule 1 to the Transportation of Dangerous Goods Regulations; and
(c) a multi-ingredient kit that is used to manufacture an explosive.
(2) For the purposes of section 2 of the Explosives Act, military device means a shell, bomb, projectile, mine, missile, rocket, shaped charge, grenade, perforator and any other explosive article that is manufactured exclusively for military or law enforcement purposes.
(3) The following definitions apply in these Regulations.
activity involving an explosive means acquiring, possessing, selling, offering for sale, storing, manufacturing, transporting, transporting in transit, importing, exporting or delivering an explosive or using fireworks. (activité visant un explosif)
attended means to be constantly monitored by a person and, unless these Regulations provide otherwise, includes monitoring by a person using electronic means. (surveillé)
compatible means, in relation to a material, that the material
(a) will not react chemically with an explosive or raw material so as to affect the functioning of the explosive or raw material or to increase the likelihood of an ignition of the explosive or raw material; and
(b) will not be degraded by an explosive or raw material so as to affect its function or increase the likelihood of an ignition of the explosive or raw material. (compatible)
decontaminate means to completely remove, clean or purge an explosive substance from a building, room, area, vehicle, equipment or container. (décontamination)
explosive article means an article that contains one or more explosive substances. (objet explosif)
explosive substance means a solid or liquid substance — or a mixture of solid and liquid substances — that is capable, by chemical reaction, of producing a gas at a temperature, pressure and speed that is capable of causing damage to surrounding structures or infrastructure. It includes a substance — or a mixture of substances — that is designed to produce an effect of heat, light, sound, gas or smoke, or a combination of such effects, by means of a non-detonative self-sustaining exothermic chemical reaction, even if the substance or mixture does not produce a gas. (matière explosive)
industrial explosive has the same meaning as in section 213. (explosif industriel)
law enforcement agency means a police force established for a province, municipality or region, the Royal Canadian Mounted Police, the Correctional Service of Canada or the Canada Border Services Agency. (organisme d’application de la loi)
local authority means, in relation to special effect pyrotechnics or display fireworks, the municipal, provincial or territorial organization or office that has authority to authorize their use in a locality. (autorité locale)
manufacturing has the same meaning as in section 53. (fabriquer)
misfire means the complete or partial failure of a charge to explode as planned. (raté)
product name means the trade name or part number of an explosive, or both in the case of an explosive that has both a trade name and a part number. (nom de produit)
pyrotechnic event has the same meaning as in section 361. (activité pyrotechnique)
small arms cartridge has the same meaning as in subsection 268(1). (cartouches pour armes de petit calibre)
special effect pyrotechnics has the same meaning as in section 361. (pièces pyrotechnique à effets spéciaux)
storage unit means a building, structure, place or container in which explosives are stored and that is not licensed. However, it does not include a dwelling or any structure, place or container in a dwelling. (unité de stockage)
vendor magazine licence has the same meaning as in section 144. (licence de poudrière (vendeur))
vulnerable place refers to
(a) any building or place in which people live, work or assemble;
(b) public roads and pathways, railways and other transportation infrastructure;
(c) communication infrastructure and energy infrastructure, including pipelines and energy transmission lines; and
(d) any place where a substance that increases the likelihood of a fire or explosion is likely to be stored. (lieu vulnérable)
(4) The definition manufacturing in subsection (3) does not apply in Part 20.
7 Nothing in these Regulations has the effect of preventing an inspector from carrying out their duties under the Explosives Act.
8 Any document, other than a document referred to in subsection 173(3) or (4) or 183(3) or section 426, and any information that is required by these Regulations to be in writing, may be delivered in hard copy or by electronic means.
9 This Part sets out requirements, prohibitions and safety precautions that apply to every person who is carrying out an activity involving an explosive or who is in the vicinity of explosives.
10 (1) Unless otherwise indicated in these Regulations, a person must be at least 18 years old to carry out an activity involving an explosive.
(2) Subsection (1) does not apply to the following persons:
(a) a person who acquires small arms cartridges for their own personal use; or
(b) a person under 18 years old who possesses small arms cartridges or black powder cartouches at a federal, provincial or territorial site that holds a division 2 factory licence for the purposes of conducting demonstrations or historical re-enactments sanctioned by the federal, provincial or territorial authority for the site.
11 A person may carry out an activity involving an explosive only if the explosive is authorized under Part 3.
12 The following explosives are, in the opinion of the Minister, intrinsically unsafe and must not be acquired, possessed, used or sold:
(a) trick fireworks (for example, cigarette loads, dancing crackers and exploding golf balls); and
(b) explosives containing chemicals that are not compatible with one another.
13 A person must not sell or otherwise transfer an explosive to another person if they have reasonable grounds to suspect that
(a) the other person is not authorized by the Explosives Act or these Regulations to acquire the explosive;
(b) the explosive will be used for a criminal purpose; or
(c) the other person is under the influence of alcohol or another performance-diminishing substance.
14 A person must not acquire an explosive that the Chief Inspector of Explosives has authorized with restrictions unless
(a) if the authorization is restricted to specified people or bodies or classes of people or bodies, they are a person or body or member of a class of people or bodies specified in the authorization;
(b) if the authorization is restricted to specified purposes, they intend to use the explosive for a purpose specified in the authorization; or
(c) if the authorization is restricted to specified people or bodies or classes of people or bodies and to specified purposes, they are a person or body or member of a class of people or bodies specified in the authorization and intend to use the explosive for a purpose specified in the authorization.
15 A person must not carry out an activity involving an explosive if they are under the influence of alcohol or another performance-diminishing substance. A person who has taken a prescription drug may carry out such an activity if they have medical proof that they need the drug and that it will not impede their ability to safely carry out the activity.
16 A person must not smoke while they are carrying out an activity involving an explosive or if they are within 8 m of an explosive.
17 (1) A person must not alter, deface or obscure any printing or label on an explosive or its packaging unless they are ordered to do so by an inspector to correct an error.
(2) However, after removing an explosive from its packaging, a person may alter the printing or label on the packaging to reflect the remaining quantity.
18 A person must not include in a document required by these Regulations any information that is false or misleading. A person must not submit a document that, by reason of non-disclosure of facts, is false or misleading.
19 A person who is carrying out an activity involving an explosive must ensure that they, and any person under their supervision, have knowledge of the activity being carried out and of the measures that must be taken to minimize any likelihood of harm to people and property that could result from the activity, including measures to
(a) prevent an accidental ignition;
(b) limit the spread of any fire or the extent of any explosion; and
(c) protect people from the effects of any fire or explosion.
20 A person who is carrying out an activity involving an explosive must take measures that minimize the likelihood of harm to people or property that could result from the activity, including measures to
(a) prevent an accidental ignition;
(b) limit the spread of any fire or the extent of any explosion; and
(c) protect people from the effects of any fire or explosion.
21 A person who is in control of an explosive must ensure that only people authorized by them or by law have access to the explosive.
22 A person may use fireworks only for the purpose for which they were designed.
23 This Part sets out activities involving an explosive that may be carried out even if the explosive is not authorized. It also sets out the procedure for obtaining authorization of an explosive and when permission is required to change an explosive that has been authorized. It deals as well with the classification and reclassification of explosives, their recall and the cancellation of an authorization.
24 The duties and functions of the Chief Inspector of Explosives that are set out in sections 32 to 40 may be performed by an inspector designated by the Chief Inspector.
25 Despite section 11, the following activities involving an explosive may be carried out even though the explosives are not authorized:
(a) the manufacture, possession and storage of up to 1 kg of explosives to be used in conducting an experiment, demonstration, test or analysis at a school, college, university or other learning institution;
(b) the manufacture, possession and storage of up to 5 kg of explosives to be used in conducting an experiment, demonstration, test or analysis by a government or law enforcement agency;
(c) the manufacture, possession and storage of up to 5 kg of explosives to be used in conducting an experiment, test or analysis at a private or commercial laboratory;
(d) the manufacture, possession and storage of black powder charges for ceremonial use;
(e) the manufacture, possession, storage, transportation and delivery of small arms cartridges or black powder cartouches for personal use;
(f) the assembly, possession and use of special purpose pyrotechnics, as defined in section 361;
(g) the sending of a sample of an explosive for authorization testing to the Chief Inspector of Explosives, at his or her request, and the possession, importation, transportation, delivery and storage of that sample;
(h) the importation of an explosive, if the conditions set out in section 45 or 45.1 are met, and, if necessary, the possession, delivery, storage and transportation of that explosive;
(i) the exportation, possession, delivery, storage and transportation of an explosive, if the conditions set out in section 45 are met;
(j) the transportation in transit of an explosive and, if necessary, the transportation, possession, storage and delivery of that explosive;
(k) the transportation of set pieces, that is to say, lattices intended to be fixed to the ground and arrayed with ground-level fireworks that form an image, word or design; and
(l) the transportation of explosives within Canada for the Department of National Defence, the Canadian Armed Forces or any armed forces cooperating with the Canadian Armed Forces, if the following conditions are met:
(i) the explosives have been classified for the purposes of transportation by a competent authority under the Recommendations on the Transport of Dangerous Goods — Model Regulations, published by the United Nations, as amended from time to time, and
(ii) the competent authority has been recognized by the Chief Inspector of Explosives as having a transport classification process equivalent to that set out in the Transportation of Dangerous Goods Regulations.
26 (1) An explosive may be authorized for an indefinite period or for a specified period.
(2) An authorization for an indefinite period is issued if the explosive is intended to be used in ongoing or recurring activities. The authorization may be issued with restrictions.
(3) An authorization for a specified period is issued if the explosive is intended to be used for a specific purpose within a specified period (for example, a chemical analysis, a product trial, scientific research or a special event, tour or international competition involving fireworks).
27 The following people may apply to have an explosive authorized:
(a) a person who proposes to manufacture the explosive;
(b) a foreign manufacturer of the explosive; or
(c) a person who has permission to apply from a manufacturer of the explosive.
28 An applicant for an authorization for an indefinite period must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must include the following information:
(a) the name, address, telephone number and email address of the applicant as well as of the manufacturer if the applicant is not the manufacturer;
(b) a short description of the explosive and its properties, as well as its product name;
(c) a description of the circumstances in which it will be used;
(d) for an explosive article, a technical drawing of the article, prepared to scale, that sets out its dimensions, its components and the materials of its construction;
(e) the composition of the explosive and the percent tolerance or range of each of its ingredients;
(f) the composition of any substitute explosive and the percent tolerance or range of each of its ingredients;
(g) the results of any tests conducted by or on behalf of a foreign state that has authorized the explosive or a similar explosive, or the classification of the explosive by a foreign state;
(h) the anticipated classification of the explosive under section 36;
(i) in the case of an explosive to be manufactured in Canada for the first time, a description of the manufacturing operations that will be used;
(j) for an explosive article, a description of its performance characteristics, the way in which it functions and the instructions for its use;
(k) a description of any packaging or container in which the explosive will be handled, used, stored or displayed for sale;
(l) a description of the packaging or container in which the explosive will be transported and stored, and the safety standards to which the packaging or container must conform under the Transportation of Dangerous Goods Act, 1992;
(m) the information that will be printed on the explosive and its packaging;
(n) the safety instructions, in both English and French, that will accompany the explosive, including procedures for preventing accidents when handling, storing, using or destroying the explosive and the procedures to follow if the explosive is lost or stolen; and
(o) the period after the manufacture of the explosive during which it will remain suitable for use in the circumstances described in paragraph (c).
29 An applicant for an authorization for a specified period, if the explosive is for use other than at a special event, tour or international competition involving fireworks, must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must include the following information:
(a) the name, address, telephone number and email address of the applicant as well as of the manufacturer if the applicant is not the manufacturer;
(b) the period for which the authorization is requested;
(c) a short description of the explosive and its properties, as well as its product name;
(d) a description of the circumstances in which it will be used;
(e) the quantity of the explosive that will be used during the period;
(f) every location where it will be used;
(g) in the case of a product trial, the location where the explosive will be manufactured;
(h) for an explosive article, a technical drawing of the article prepared to scale that includes its dimensions, its components and the materials of its construction;
(i) the composition of the explosive and the percent tolerance or range of each of its ingredients;
(j) the composition of any substitute explosive and the percent tolerance or range of each of its ingredients;
(k) for an explosive article, a description of its performance characteristics, the way in which it functions and instructions for its use;
(l) a description of any packaging or container in which the explosive will be handled, used or displayed for sale;
(m) a description of the packaging or container in which the explosive will be transported and stored and the safety standards with which the packaging or container must comply under the Transportation of Dangerous Goods Act, 1992;
(n) the safety instructions, in both English and French, that will accompany the explosive, including procedures for preventing accidents when handling, storing, using or destroying the explosive and the procedures to follow if the explosive is lost or stolen;
(o) the delivery system, if the explosive is to be transported in bulk;
(p) the method to be used to destroy any of the explosive that is not used before the authorization expires; and
(q) the results of any tests conducted by or on behalf of a foreign state that has authorized the explosive or a similar explosive, or the classification of the explosive by a foreign state.
30 An applicant for an authorization for a specified period, if the explosive is for use at a special event, tour or international competition involving fireworks, must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must include the following information:
(a) the name, address, telephone number and email address of the applicant as well as of the manufacturer if the applicant is not the manufacturer;
(b) a short description of the explosive and its properties, as well as its product name;
(c) the transport classification issued by the country of origin;
(d) the places and dates of the special event, tour or international competition at which the explosive will be used;
(e) the controls that will be put in place to ensure that the explosive is used only for the special event, tour or international competition for which it is authorized;
(f) the precautions that will be taken to minimize the likelihood of harm to people and property; and
(g) the method to be used to destroy any of the explosive that is not used before the authorization expires.
31 The applicant for an authorization must pay the applicable fees set out in Part 19.
32 (1) The Chief Inspector of Explosives must authorize the use of an explosive for an indefinite period if the Chief Inspector determines, on the basis of the results of one or more of the following tests, that the explosive can be safely manufactured, handled, stored, transported, used and destroyed:
(a) a test listed in the table to this Part that is conducted on the explosive;
(b) a test listed in the table to this Part that is conducted on a similar explosive; or
(c) a test that was conducted on this or a similar explosive by or on behalf of a foreign state that has authorized the explosive or similar explosive and that is equivalent to a test listed in the table to this Part.
(2) The authorization must be given with restrictions if the Chief Inspector determines, based on the type, hazard classification, UN number and the circumstances in which the explosive will be used, that it can safely be used only by a specific person, body or class of people or bodies, or for a specific purpose.
33 The Chief Inspector of Explosives must authorize an explosive for a specified period if the Chief Inspector determines, on the basis of the information in the application and the results of one or more of the following tests, that the explosive can be safely manufactured, handled, stored, transported, used and destroyed:
(a) any sample testing; or
(b) a test that was conducted on the explosive or a similar explosive by or on behalf of a foreign state that has authorized the explosive or similar explosive and that the Chief Inspector of Explosives has determined is the equivalent to a test listed in the table to this Part.
34 (1) If a sample of an explosive is required for a test listed in the table to this Part, the Chief Inspector of Explosives must notify the applicant, specify the quantity of the explosive required and indicate the address to which the sample may be sent.
(2) A person must not send a sample of an explosive for testing unless they have been requested to do so by the Chief Inspector.
35 (1) The Chief Inspector of Explosives must give the applicant written notice of whether the explosive has been authorized.
(2) If the explosive has not been authorized, the notice must include the reasons for the refusal to authorize.
(3) If the explosive has been authorized, the notice must include the following information:
(a) the classification of the explosive;
(b) in the case of an authorization for an indefinite period, any restrictions respecting the people or bodies or classes of people or bodies that may use the explosive and any restrictions respecting the purposes for which it may be used;
(c) in the case of an authorization for a specified period, the period for which the explosive is authorized, the quantity authorized, the place of manufacture and the place of use; and
(d) the date on which the explosive was authorized.
36 (1) The Chief Inspector of Explosives must classify each authorized explosive by type, hazard category and UN number in accordance with this section.
(2) Each authorized explosive is classified according to its intended use as one of the following types:
(a) E — high explosives:
(i) E.1 — blasting explosives,
(ii) E.2 — perforating explosives,
(iii) E.3 — special-application explosives;
(b) I — initiation systems;
(c) P — propellant powder:
(i) P.1 — black powder and hazard category PE 1 black powder substitutes,
(ii) P.2 — smokeless powder and hazard category PE 3 black powder substitutes;
(d) C — cartridges:
(i) C.1 — small arms cartridges,
(ii) C.2 — blank cartridges for tools,
(iii) C.3 — percussion caps;
(e) D — military explosives and law enforcement explosives;
(f) F — fireworks:
(i) F.1 — consumer fireworks,
(ii) F.2 — display fireworks,
(iii) F.3 — special effect pyrotechnics,
(iv) F.4 — fireworks accessories,
(v) F.5 — novelty devices;
(g) R — rocket motors:
(i) R.1 — model rocket motors,
(ii) R.2 — high-power rocket motors,
(iii) R.3 — rocket motor accessories,
(iv) R.4 — advanced high-power rocket motors; or
(h) S — special purpose explosives:
(i) S.1 — low-hazard special purpose explosives,
(ii) S.2 — high-hazard special purpose explosives.
(3) Each authorized explosive is also classified for the purposes of manufacturing and storage into one or more of the following potential effects (PE) categories, if applicable. The classification is made according to hazard, determined on the basis of manufacturing operations, the quantity of explosive and how the explosive will be packaged:
(a) PE 1 — mass explosion hazard;
(b) PE 2 — serious projection hazard but not a mass explosion hazard;
(c) PE 3 — fire hazard and either a minor blast or minor projection hazard, or both, but not a mass explosion hazard; or
(d) PE 4 — fire hazard or slight explosion hazard, or both, with only local effect.
(4) Each authorized explosive may be assigned a UN number as set out in column 1 of Schedule 1 to the Transportation of Dangerous Goods Regulations on the basis of its type, hazard category and the circumstances in which it will be used.
37 (1) A person who has obtained the authorization of an explosive must obtain the written permission of the Chief Inspector of Explosives before changing the explosive in a way that would render any of the following information inaccurate:
(a) in the case of an authorization for an indefinite period, any information required under paragraphs 28(d) to (f) or (l) to (n); and
(b) in the case of an authorization for a specified period, any information required under paragraphs 29(h) to (j), (m) or (n).
(2) The Chief Inspector of Explosives must give permission if the proposed change would not affect the performance or classification of the explosive. The Chief Inspector must notify the holder in writing when permission is given.
(3) If permission is refused, the Chief Inspector must notify the holder in writing that permission is refused and that a new application for authorization is required.
(4) Subsection (1) does not apply to type C.2, C.3 or S.1 explosives if
(a) for the purposes of transportation, the explosive has been classified as Class 1.4S under the Model Regulations on the Transport of Dangerous Goods, published by the United Nations;
(b) the UN number assigned to the explosives by the competent authority of the country of origin has not changed; and
(c) the Chief Inspector of Explosives has received a written notice of any change to the explosive.
38 (1) The Chief Inspector of Explosives must reclassify an authorized explosive if periodic testing or new information reveals that its classification is no longer appropriate.
(2) The Chief Inspector must give the person who obtained the authorization written notice of the explosive’s new classification.
39 The Chief Inspector of Explosives must cancel the authorization of an explosive in any of the following circumstances:
(a) the person who obtained the authorization has not paid the applicable fee within 30 days after the date of an invoice from the Department of Natural Resources;
(b) periodic testing or new information reveals that the explosive can no longer be safely manufactured, handled, stored, transported, used or destroyed;
(c) the Chief Inspector is unable to determine whether the explosive can still be safely manufactured, handled, stored, transported, used or destroyed;
(d) the person who obtained the authorization requests the cancellation; or
(e) the manufacturer is no longer in business and the Chief Inspector has reasonable grounds to believe that the explosive is no longer in any person’s possession.
40 (1) If the authorization of an explosive is cancelled because the explosive is no longer safe when manufactured, handled, stored, transported, used or destroyed in the normal way, the Chief Inspector of Explosives must, by written notice, require any manufacturer, any importer and any seller of the explosive to recall any of the explosive that they have manufactured, imported or sold.
(2) If a batch or lot of explosives cannot be safely handled, stored, transported, used or destroyed because of a manufacturing defect, the Chief Inspector of Explosives must, by written notice, require the manufacturer or importer and any seller of the batch or lot to recall it.
(3) A person who receives a notice to recall an explosive must immediately recall the explosive and either make it safe or destroy it in a safe manner.
41 (1) The Minister must keep an up-to-date list of all explosives that are authorized for an indefinite period. The list must set out the following information for each explosive:
(a) the name of the person who obtained the authorization;
(b) the product name and classification of the explosive; and
(c) any restrictions imposed by the Chief Inspector of Explosives.
(2) However, the Minister is not required to include on the list an explosive that is classified as a military explosive or law enforcement explosive.
42 The Minister must remove from the list of authorized explosives any explosive for which the authorization is cancelled.
43 This Part sets out
(a) the circumstances in which explosives may be imported, exported or transported in transit without a permit;
(b) the information that a person must include in an application for a permit to import or export explosives or transport them in transit; and
(c) the requirements that permit holders must meet, including the information that permit holders must provide to the Chief Inspector of Explosives after explosives are imported, exported or transported in transit.
44 (1) The following definitions apply in this Part.
annual permit means a permit for multiple importations, exportations or transportations in transit during a one-year period. (permis annuel)
secure storage site means a site at which the Minister or a province has authorized storage of the type and quantity of explosive that is to be transported in transit. (lieu de stockage sûr)
single use permit means a permit for a single importation, exportation or transportation in transit. (permis à utilisation unique)
(2) A reference to the mass of an explosive in this Part is a reference to its net quantity (the mass of the explosive excluding the mass of any packaging or container and, in the case of an explosive article, also excluding any component that is not an explosive substance).
45 A person may import, export or transport in transit an explosive set out in the table to this section without a permit if the following conditions are met:
(a) the explosive is imported, exported or transported in transit for personal use and not for commercial purposes;
(b) the explosive enters or leaves Canada with the person importing or exporting it or, if the explosive is transported in transit, it remains with the person transporting it at all times; and
(c) in the case of small arms cartridges, the cartridges do not include a tracer, incendiary or similar military component or device; and
(d) the quantity of the explosive being imported, exported or transported in transit is not more than the quantity set out in the table.
45.1 A person may import explosives without a permit if the following conditions are met:
(a) the explosives have been procured by the Department of National Defence, the Canadian Armed Forces or any armed forces cooperating with the Canadian Armed Forces;
(b) the shipper and the carrier have ensured that nothing other than the explosives are transported in the same vehicle;
(c) the carrier or driver is in possession of an approval letter or equivalent document issued under Part 8;
(d) the Department of National Defence, the Canadian Armed Forces or any armed forces cooperating with the Canadian Armed Forces has informed the carrier of the transportation requirements under Part 9; and
(e) the carrier transports the explosives directly from the Canadian port of entry to the Department of National Defence, the Canadian Armed Forces or any armed forces cooperating with the Canadian Armed Forces.
46 (1) An applicant for an import permit must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must state whether a single use permit or an annual permit is requested and include the following information:
(a) the applicant’s name, address, telephone number and email address;
(b) if the applicant has a customs broker, the broker’s name, address, telephone number and email address and the name of a contact person;
(c) the product name and UN number of each explosive to be imported;
(d) the quantity of each explosive to be imported or, if the application is for an annual permit, the estimated quantity of each explosive to be imported during the year;
(e) the purpose for which each explosive is imported (personal, industrial or commercial use, reloading, field trial or other testing, sale, consignment, pyrotechnic event, fireworks display or other purpose);
(f) the name of the person who obtained the authorization of each explosive;
(g) the country of origin of each explosive;
(h) the location of the Canadian port of entry through which each explosive will pass;
(i) the address of the person to whom each explosive will be delivered and the location where it will be stored;
(j) in the case of an explosive to be stored in a licensed factory or a licensed magazine, the number and expiry date of the factory or magazine licence and, for each explosive that will be stored there, the quantity of that explosive authorized by the licence to be stored;
(k) in the case of an explosive to be stored in a magazine owned by a person other than the applicant, proof that the other person has agreed to have the explosive stored in their magazine; and
(l) the date of the application.
(2) An applicant for an import permit must pay the applicable fees set out in Part 19.
47 (1) A holder of an import permit must ensure that the following requirements are met:
(a) the quantity of each explosive to be imported must not exceed the quantity of the explosive that the holder is authorized by a factory licence, a magazine licence or these Regulations to store; and
(b) the packaging in which each explosive is imported must conform to the description of the packaging set out in the explosive’s authorization.
(2) A holder of an import permit must ensure that the following information is displayed on each explosive to be imported:
(a) the name and address of the person who obtained the explosive’s authorization;
(b) either the date of its manufacture and the shift during which it was manufactured, if any, or its lot number;
(c) its product name; and
(d) instructions, in both English and French, for its safe handling, storage, use and destruction.
(3) A holder of an import permit must ensure that the information
(a) is legibly printed on the explosive;
(b) is legibly printed on a label affixed to the explosive, if it is not possible to comply with paragraph (a);
(c) is contained in a barcode or matrix code that is printed on the explosive, or on a label affixed to it, and can be read by a device that is available to the general public (for example, a smartphone), if it is not possible to comply with paragraph (a) and (b); or
(d) is legibly printed on the packaging containing the explosive or on a label affixed to the packaging, if it is not possible to comply with paragraphs (a) to (c).
(4) Paragraph 2(d) does not apply in the case of fireworks that are imported for use at a special event, tour or international competition if the instructions are printed in a language understood by the person who will use the fireworks.
(5) A holder of an import permit must ensure that the following information is legibly printed on the packaging, or on a label affixed to the packaging, of each explosive to be imported:
(a) the words “Ammunition/Munitions”, “Explosives/Explosifs”, “Fireworks/Pièces pyrotechniques”, “Pyrotechnics/Pièces pyrotechniques” or “Rocket Motors/Moteurs de fusée”, or other descriptive wording, as the case may be, on the outer packaging and any inner packaging;
(b) the product name of the explosive and the name and address of the person who obtained its authorization, on the outer packaging;
(c) in the case of a type F explosive, whether it is type F.1, F.2, F.3, F.4 or F.5, on the outer packaging; and
(d) in the case of a type S explosive, whether it is type S.1 or S.2, on the outer packaging.
(6) A holder of an import permit must ensure that the information to be printed on an explosive and its packaging is printed on them before the explosive is distributed and in any case no later than 15 days after the date on which the explosive is released under section 31 of the Customs Act.
(7) A holder of an import permit must complete, sign and send to the Chief Inspector of Explosives a report using the form provided by the Department of Natural Resources. The report must include the following information:
(a) the holder’s name, address, telephone number and email address;
(b) the holder’s permit number and its expiry date;
(c) the product name and UN number of each explosive that was imported and the name of the person who obtained its authorization;
(d) the quantity and UN number of each type of explosive;
(e) the country of origin of each explosive;
(f) the means of transport used;
(g) the location of the Canadian port of entry through which each explosive passed; and
(h) the date of the report and the name of the person who completed the report.
(8) A holder of an annual permit must submit the report before the permit is renewed or, if the permit is not renewed, within a year after it expires. The report must be submitted even if no explosives were imported during the year for which the permit was valid.
(9) A holder of a single use permit must submit the report within 30 days after the date on which the explosives were imported.
(10) Subsections (7) to (9) do not apply to a holder that reports the importation of explosives by electronic means in accordance with section 4 of the Reporting of Imported Goods Regulations.
48 An applicant for an export permit must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must state whether a single use permit or an annual permit is requested and include the following information:
(a) the applicant’s name, address, telephone number and email address;
(b) if the applicant has a freight forwarder, their name, address, telephone number and email address and the name of a contact person;
(c) the product name and UN number of each explosive to be exported;
(d) the quantity of each explosive to be exported or, if the application is for an annual permit, the estimated quantity of each explosive to be exported during the year;
(e) the name of the person who obtained the authorization of each explosive;
(f) the country of origin of each explosive;
(g) the location of the Canadian port of exit through which each explosive will pass;
(h) the name, address, telephone number and email address of the person to whom each explosive will be delivered;
(i) a copy of a permit, or other proof, establishing that each explosive may lawfully enter the country of destination;
(j) a copy of a permit, or other proof, establishing that each explosive may lawfully transit any country through which it will be transported if the country requires permission for the in transit transportation of the explosive; and
(k) the date of the application.
49 (1) A holder of an export permit must ensure that the following information is legibly printed on the packaging, or on a label affixed to the packaging, of each explosive to be exported:
(a) the words “Ammunition/Munitions”, “Explosives/Explosifs”, “Fireworks/Pièces pyrotechniques”, “Pyrotechnics/Pièces pyrotechniques” or “Rocket Motors/Moteurs de fusée”, or other descriptive wording, as the case may be, on the outer packaging and any inner packaging;
(b) the product name of the explosive and the name and address of the person who obtained its authorization, on the outer packaging;
(2) A holder of an export permit must complete, sign and send to the Chief Inspector of Explosives a report using the form provided by the Department of Natural Resources. The report must include the following information:
(a) the holder’s name, address, telephone number and email address;
(b) the holder’s permit number and its expiry date;
(c) the product name and UN number of each explosive that was exported and the name of the person who obtained its authorization;
(d) the quantity and UN number of each type of explosive that was exported;
(e) the country of origin of each explosive;
(f) the means of transport used;
(g) the location of the Canadian port of exit through which each explosive passed; and
(h) the date of the report and the name of the person who completed the report.
(3) A holder of an annual permit must submit the report before the permit is renewed or, if the permit is not renewed, within a year after it expires. The report must be submitted even if no explosives were exported during the year for which the permit was valid.
(4) A holder of a single use permit must submit the report within 30 days after the date on which the explosives were exported.
(5) Subsections (2) to (4) do not apply to a holder that reports the importation of explosives by electronic means in accordance with section 4 of the Reporting of Imported Goods Regulations.
50 An applicant for an in transit permit must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must state whether a single use permit or an annual permit is requested and include the following information:
(a) the applicant’s name, address, telephone number and email address;
(b) if the applicant has a freight forwarder, their name, address, telephone number and email address and the name of a contact person;
(c) the product name and UN number of each explosive to be transported in transit;
(d) if an explosive to be transported is not on the list of authorized explosives referred to in subsection 41(1), the name or product name of the explosive, a description of the explosive and its UN number;
(e) the quantity of each explosive to be transported or, if the application is for an annual permit, the estimated quantity of each explosive to be transported during the year;
(f) the name of the manufacturer of each explosive;
(g) the country of origin of each explosive;
(h) the anticipated dates of entry into and departure from Canada;
(i) the location of the Canadian port of entry and port of exit through which each explosive will pass;
(j) the location in Canada of secure storage sites that may be used if the transportation is interrupted and, if any of the sites is a licensed factory or a licensed magazine, the number and expiry date of the factory or magazine licence and, for each explosive that might be stored there, the quantity of that explosive that is authorized by the licence to be stored;
(k) if any of the secure storage sites is a magazine that is owned by a person other than the applicant, proof that the other person has agreed to have the explosive stored in their magazine if an interruption in transportation occurs;
(l) the name, address, telephone number and email address of the person to whom each explosive will be delivered;
(m) a copy of a permit, or other proof, establishing that each explosive may lawfully enter the country of destination;
(n) a copy of a permit, or other proof, establishing that each explosive may lawfully transit any country through which it will be transported if the country requires permission for the in transit transportation of the explosive; and
(o) the date of the application.
51 (1) A holder of an in transit permit must ensure that the following information is legibly printed on the packaging, or on a label affixed to the packaging, of each explosive to be transported in transit:
(a) the name or product name of the explosive;
(b) a description of the explosive;
(c) the UN number of the explosive; and
(d) the quantity to be transported.
(2) If anything interrupts an in transit transportation of explosives and, as a consequence, the explosives need to be stored, the holder of the in transit permit must ensure that they are stored in a licensed magazine, storage unit or dwelling in accordance with these Regulations or at a secure storage site.
(3) A holder of an in transit permit must complete, sign and send to the Chief Inspector of Explosives a report using the form provided by the Department of Natural Resources. The report must include the following information:
(a) the permit holder’s name, address, telephone number and email address;
(b) the holder’s permit number and its expiry date;
(c) the name or product name, the UN number and a description of each explosive that was transported in transit; and
(d) the quantity and UN number of each type of explosive that was transported in transit;
(e) the country of origin of each explosive;
(f) the means of transport used;
(g) the location of the Canadian port of entry and port of exit through which each explosive passed; and
(h) the date of the report and the name of the person who completed the report.
(4) A holder of an annual permit must submit the report before the permit is renewed or, if the permit is not renewed, within a year after it expires. The report must be submitted even if no explosives were transported in transit during the year for which the permit was valid.
(5) A holder of a single use permit must submit the report within 30 days after the date on which the explosives entered Canada.
52 (1) This Part sets out the rules for manufacturing explosives. However, it does not apply to the manufacture of small arms cartridges or black powder cartouches for personal use or to repackaging under a vendor magazine licence.
(2) Division 1 (sections 55 to 105) sets out how to obtain a division 1 factory licence or a satellite site certificate, as well as the requirements for holders of the licence or certificate and for workers at, and visitors to, the factory or satellite site.
(3) Division 2 (sections 106 to 132) sets out how to obtain a division 2 factory licence or a manufacturing certificate, as well as the requirements for holders of the licence or certificate and for workers at, and visitors to, the workplace.
(4) Division 3 (sections 133 to 142) sets out the manufacturing activities that do not require a factory licence or manufacturing certificate and the requirements for people who carry out those activities.
53 In this Part, manufacturing includes the following activities:
(a) making or manufacturing an explosive substance from raw material or from another explosive substance;
(b) making or manufacturing an explosive article, including the assembly of an article from explosive and non-explosive components;
(c) altering or remaking an explosive substance or explosive article by modifying its chemical composition (for example, by gassing or blending) or by subjecting it to physical processes with the input of energy (for example, pneumatic handling, pumping, shearing or thickening);
(d) dividing an explosive into its components or unmaking, breaking up or in any manner destroying it;
(e) packaging explosives; and
(f) testing an unauthorized explosive or testing an explosive to assess its potential for a use other than its authorized use.
54 A reference to the mass of an explosive in this Part is a reference to its net quantity (the mass of the explosive excluding the mass of any packaging or container and, in the case of an explosive article, also excluding any component that is not an explosive substance).
55 The following definitions relating to sites and authorizations apply in this Division.
client site means
(a) a blast site where a mobile process unit is used to manufacture explosives away from a factory or satellite site; or
(b) a point-of-use site where jet perforating guns are manufactured. (site client)
division 1 factory licence means a licence that is issued under paragraph 7(1)(a) of the Explosives Act and authorizes the manufacture of explosives at a factory. (licence de fabrique de la section 1)
satellite site means a site that is located away from a factory and at which explosives that are intended for use at a client site are manufactured and temporarily stored. (site satellite)
satellite site certificate means a manufacturing certificate that is issued to the holder of a division 1 factory licence under paragraph 7(1)(c) of the Explosives Act and authorizes the manufacture of explosives at a satellite site. (certificat de site satellite)
56 The following definitions relating to facilities and equipment at factories, satellite sites or client sites apply in this Division.
factory magazine means a magazine that is located at a factory or satellite site. (poudrière de fabrique)
mobile process unit means a vehicle or portable machine that is used at a factory, satellite site or client site to carry out an explosives manufacturing operation. (unité de fabrication mobile)
process unit means a building, structure, room or place in which an explosives manufacturing operation is carried out at a factory. (unité de fabrication)
raw material storage facility means a facility where non-explosive raw material and packaging material are stored at a factory or satellite site. (installation de stockage de matières premières)
transport unit means a vehicle or container in which explosives or raw material are conveyed from one place to another at a factory or satellite site without using a public road. It includes a tow motor, forklift, wagon, handcart and basket, but does not include a conveyor or pipeline. (unité de transport)
57 The following definitions relating to people at factories, satellite sites or client sites apply in this Division.
competent person means a person who has been certified as trained in accordance with section 83. (personne compétente)
worker means a person who is at a factory or satellite site to carry out a manufacturing operation or some other kind of work (for example, maintenance of facilities or repair of equipment) for the holder of a division 1 factory licence. (travailleur)
58 (1) A holder of a division 1 factory licence may manufacture explosives if the holder complies with this section.
(2) Each explosive to be manufactured must be specified in the division 1 factory licence or a satellite site certificate.
(3) Explosives must be manufactured at one of the following locations:
(a) the factory specified in the division 1 factory licence;
(b) a satellite site specified in a satellite site certificate; or
(c) a client site specified in the licence or a certificate.
(4) A manufacturing operation may be carried out in a process unit or factory magazine, and maintenance and other work may be done to a process unit, factory magazine, raw material storage facility or transport unit, only if the manufacturing operation, maintenance or other work is specified in the division 1 factory licence or a satellite site certificate. However, the minor servicing authorized by these Regulations does not have to be specified in the licence or certificate.
59 (1) A holder of a division 1 factory licence may acquire and store explosives and may sell explosives without a vendor magazine licence.
(2) A holder who acquires or sells explosives must comply with Parts 10 to 18. However, they are not required to comply with the provisions of those Parts that apply to the storage of explosives if the explosives are stored at the factory or a satellite site.
60 (1) An applicant for a division 1 factory licence or a satellite site certificate must complete, sign and send to the Chief Inspector of Explosives the application form provided by the Department of Natural Resources. The application must state whether a licence or a certificate is requested and must include the following information:
(a) the name, address, telephone number and email address of both the applicant and a contact person;
(b) each type of explosive to be manufactured;
(c) if the application is for a satellite site certificate, the number of the applicant’s division 1 factory licence and the dates on which the operations at the satellite site will begin and end;
(d) the address of the factory or satellite site; and
(e) the name, address, telephone number and email address of a contact person at the factory or satellite site.
(2) The application must include the following documents:
(a) a factory site plan or a satellite site plan that shows
(i)
(ii) the location of every process unit, factory magazine and raw material storage facility, and every building or structure that contains such a unit, magazine or facility,
(iii) the location of any other building or structure, and
(iv) the distance in metres between each process unit, factory magazine, raw material storage facility, building and structure;
(v) the area surrounding the site that is exposed to the hazards (for example, debris or blast effect) that could result from an ignition of the explosives to be manufactured or stored at the site,
(vi) each vulnerable place within that area, and
(vii) the distance in metres between each vulnerable place and each process unit, factory magazine and raw material storage facility;
(b) layout sketches, diagrams or drawings that show
(i) the workplace areas, storage areas and emergency exits of every process unit, factory magazine, raw material storage facility and every building or structure that contains such a unit, magazine or facility,
(ii) the equipment to be used in each process unit, including piping and instrumentation diagrams and equipment layout drawings, and
(iii) the manufacturing operations to be carried out, including process flow sheets or process schematic drawings.
(3) The application must include the following information about the factory or satellite site:
(a) its geographical coordinates;
(b) the size of, and construction materials used for, each building at the site and all lighting, heating, ventilation and air conditioning systems, electrical installations, grounding and measures for protection from fire and lightning;
(c) a description of all site and building security features (for example, fencing, barriers and warning signs);
(d) a description of the principal manufacturing equipment to be used and its safety features;
(e) a description of each mobile process unit to be used;
(f) a description of any other mobile equipment, including transport units, to be used and how the equipment will be powered; and
(g) a description of any safety features at the site to be put in place to minimize the likelihood of harm to people or property (for example, diking, sumps, blowout panels, means of blast containment, barriers, alarms or pressure relief and control systems).
(4) If the manufacture of explosives, other than jet perforating guns, is to be carried out at a client site, the application must include the following information:
(a) the name, address, telephone number and email address of a contact person at the client site;
(b) except at a mine site or quarry, a description of the client site that includes
(i) a site plan that shows each vulnerable place within the client site, and
(ii) the distance in metres between each vulnerable place and each mobile process unit
The text continues in the official source.
