LEGALDIGMLEGALDIGM
    ← Canada
    Beta
    SOR-2010-120:en

    SOR-2010-120:en — Maritime Occupational Health and Safety Regulations

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    1 The following definitions apply in these Regulations. Act means Part II of the Canada Labour Code. (Loi) ANSI means the American National Standards Institute. (ANSI) approved organization means an organization that is approved by any province for the teaching of first aid, or a recognized institution within the meaning of subsection 1(1) of the Marine Personnel Regulations. (organisme agréé) confined space means an enclosed or partially enclosed space that (a) is not designed or intended for human occupancy, except for the purpose of performing work; (b) has restricted means of access and egress; and (c) may become hazardous to any person entering it owing to (i) its design, construction, location or atmosphere, (ii) the materials or substances in it, or (iii) any other conditions relating to it. (espace clos) crew accommodation means living, eating, recreational or sleeping quarters provided by an employer for the accommodation of employees on a vessel. (logement de l’équipage) CSA means the Canadian Standards Association. (CSA) day vessel means a vessel that is not equipped with accommodation to provide rest for employees. (bâtiment de jour) disabling injury means an employment injury or an occupational illness that (a) prevents an employee from reporting for work or from effectively performing all the duties connected with their regular work on any day after the day on which the injury or illness occurred, whether or not that later day was a work day for that employee; (b) results in an employee’s loss of a body member or part of one or in the complete loss of the usefulness of a body member or part of one; or (c) results in the permanent impairment of a body function of an employee. (blessure invalidante) electrical equipment means equipment for the generation, distribution or use of electricity. (outillage électrique) first aid certificate means the certificate issued by or with the authority of an approved organization for successful completion of a two-day first aid course. (certificat de secourisme) gross tonnage means the volume of a vessel as determined by a tonnage measurer or calculated in accordance with the regulations made under paragraph 77(h) of the Canada Shipping Act, 2001. (jauge brute) ILO means the International Labour Organization. (OIT) IMO means the International Maritime Organization. (OMI) inland voyage has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage en eaux internes) inland waters of Canada has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (eaux internes du Canada) international voyage means a voyage between a place in Canada and a place not in Canada or between places not in Canada. (voyage international) isolation means separation or disconnection from every source of energy that is capable of making equipment dangerous. (isolation) lock out means placement of a lock on equipment, machines or energy-isolating devices in accordance with an established procedure, to indicate that the equipment, machines or devices are not to be operated until the lock is removed in accordance with an established procedure. (cadenasser) marine chemist means a qualified person who (a) is a graduate of a post-secondary education institution who (i) has successfully completed courses in chemical engineering, (ii) has successfully completed a general program with a major in chemistry, or (iii) is a member of the Chemical Institute of Canada; and (b) has at least three years’ experience in chemical or engineering work, after the person has satisfied the requirements of paragraph (a), of which a minimum of 150 working hours were spent under the supervision of a qualified person in work on board a vessel testing tank reservoirs and other containers in the application of gas hazard control standards. (chimiste de la marine) MLC 2006 means the Maritime Labour Convention, 2006. (CTM 2006) near coastal voyage, Class 1 has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage à proximité du littoral, classe 1) NIOSH means the National Institute for Occupational Safety and Health in the United States. (NIOSH) oxygen deficient atmosphere means an atmosphere in which there is less than 19.5 per cent by volume of oxygen at a pressure of one atmosphere or in which the partial pressure of oxygen is less than 148 mm Hg. (air à faible teneur en oxygène) passenger vessel[Repealed, SOR/2023-257, s. 400] personal service room means a change room, sanitary facility, shower room, or other area of the crew accommodation or a combination of those areas. (local réservé aux soins personnels) protection equipment means safety materials, equipment, devices and clothing. (équipement de protection) qualified person means, in respect of a specified duty, a person who, because of their knowledge, training and experience, is qualified to perform that duty safely and properly. (personne qualifiée) readily available means, in respect of a document, present and easily accessible at the work place at all times. (facilement accessible) rest means a period during which an employee is not assigned any duty and has access to sleeping quarters and sanitary facilities. (repos) sanitary facility means a room that contains a water closet or a urinal. (cabinet de toilette) SOLAS means the 2004 consolidated edition of the International Convention for Safety of Life at Sea, 1974. (SOLAS) special purpose vessel[Repealed, SOR/2023-257, s. 400] unlimited voyage has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage illimité) ventilation equipment means a fan, blower, induced draft or other ventilation device used to force a supply of fresh, respirable atmospheric air into an enclosed space or to move ambient air from that space. (matérial de ventilation) vessel has the same meaning as in section 2 of the Canada Shipping Act, 2001. (bâtiment) 2 For the purpose of interpreting any standard incorporated by reference into these Regulations, the use of “should” is to be read as denoting an obligation. 2.1 These Regulations apply to any person who is not an employee but who performs for an employer to which these Regulations apply activities whose primary purpose is to enable the person to acquire knowledge or experience, and to the employer, as if that person were an employee of the employer, and every provision of these Regulations must be read accordingly. 3 These Regulations apply to employees employed (a) on vessels registered in Canada; (b) on uncommissioned vessels of Her Majesty in right of Canada; and (c) in the loading or unloading of vessels. 4 (1) If an employer is required by section 125 or 125.1 of the Act to the employer must keep and maintain the record and make it readily available for examination by the Head of Compliance and Enforcement, the policy committee or, if there is no policy committee, the work place committee or the health and safety representative for the vessel to which it applies. (2) To comply with subsection (1), the employer may use any recording system, including electronic records, if (a) measures are taken to ensure that the records contained in the recording systems are protected, by electronic or other means, against inadvertent loss or destruction and against tampering; and (b) a copy of the records contained in the recording systems can be printed on paper and provided on reasonable notice at the request of the Head of Compliance and Enforcement. 5 In the event of an inconsistency between any standard incorporated by reference in these Regulations and any other provision of these Regulations, that other provision must prevail to the extent of the inconsistency. 6 Any reference to a standard incorporated by reference in these Regulations is a reference to the standard, as amended from time to time. 7 (1) Every employer must (a) arrange that work in a work area is carried out in a manner that does not endanger the health or safety of any person who is engaged or working in that area or in connection with the work; and (b) adopt and carry out appropriate procedures and techniques designed or intended to prevent or reduce the risk of employment injury in the operation or carrying out of the work. (2) Crew accommodation must meet the requirements of the related provisions on health and safety protection and accident prevention, with respect to preventing the risk of exposure to hazardous levels of noise and vibration and other ambient factors and chemicals on board vessels, and provide an acceptable occupational and on-board living environment for employees. (3) Every employer or owner must ensure that a qualified person (a) is in charge in every work area; and (b) inspects every work area or structure and every item of machinery or equipment to ascertain that safe working conditions are maintained. (4) A person must not use any structure, machinery or equipment that has been reassembled after being dismantled, in whole or in part, until it has been examined by a qualified person and found to be in a safe condition. 8 The following definitions apply in this Part. accommodation ladder means a means of access to and egress from a vessel that may include platforms on different levels with ladders between the platforms and that (a) is suspended by a supporting structure of chains or steel wire ropes from its lowest suspension point; (b) is hinged at its top; and (c) can be moved so that the lowest platform is accessible from shore. (échelle de coupée) scaffold means a working platform supported from below. (échafaudage) stage means a working platform supported from above. (plate-forme suspendue) 9 This Part applies to permanent and temporary structures, including means of access, gangways, scaffolds, stages, ladders, guardrails, toe boards and safety nets. 10 The employer must ensure that the design and construction of every structure on a vessel meets the applicable requirements set out in one or more of the following regulations: (a) Vessel Construction and Equipment Regulations; (b) Hull Construction Regulations; or (c) Small Vessel Regulations. (d) [Repealed, SOR/2023-257, s. 401] 11 (1) An employee must not use a temporary structure on a vessel if it is feasible to use a permanent structure. (2) An employee must not use a temporary structure unless (a) they have been trained and instructed in its safe and proper use; and (b) they have their employer’s authority to use it. (3) Tools, equipment and materials used on a temporary structure must be arranged or secured in a manner that they cannot be knocked off the structure accidentally. (4) A qualified person must make a visual inspection of the temporary structure before each work period in which a temporary structure is used by an employee. (5) When a temporary structure is used on a vessel and that structure may be affected by the ingress and egress of the tide, a qualified person must make a visual inspection of the structure at the end of each tide cycle. (6) If the inspection reveals a defect or condition that adversely affects the structural integrity or safe use of a temporary structure, a person must not use the structure until the defect or condition is remedied. 12 (1) Means of access used to board and disembark from a vessel must provide a safe passage between the vessel and shore or between two vessels, as the case may be. (2) Every vessel that is moored alongside a wharf or another vessel must be fitted with at least one means of access between the vessel and the wharf or the other vessel. (3) If a means of access leads to a location on board a vessel that is more than 0.35 m above the deck, safe access to the deck must be provided by means of a series of steps, a ladder or other similar structure. (4) The series of steps, ladder or similar structure must (a) be firmly secured to the bulwark so as to prevent its shifting, slipping or pivoting; (b) be aligned with the means of access to the vessel; (c) have treads that are at least 600 mm in width and 200 mm in depth, with a non-slip surface; and (d) be equipped with two handhold stanchions that are (i) not less than 40 mm in diameter, (ii) extended not less than 1.2 m above the top of the bulwark, and (iii) fitted at the point of boarding or disembarking the vessel not less than 700 mm and not more than 800 mm apart. (5) Every accommodation ladder and gangway must (a) be maintained in a safe condition; (b) be installed in a manner that reduces movement; (c) be rigged and maintained in position to compensate for the movement of the vessel; (d) be lighted in accordance with the Vessel Construction and Equipment Regulations; e) if feasible, be adjusted in such a way that, whatever the state of the tide or the draught of the ship, the accommodation ladder’s angle or the gangway’s angle to the horizontal plane is not more than 40°; (f) be provided with a lifebuoy that has an attached line and is strategically placed and ready for immediate use; and (g) meet the requirements of one of the following standards: (i) ISO Standard 5488:1979, Shipbuilding – Accommodation ladders, (ii) CSA Standard CAN/CSA-S826 SERIES-01 (R2006), Ferry Boarding Facilities, (iii) the applicable standard of a classification society that has been furnished with a certificate by the Minister of Transport under subsection 12(2) of the Canada Shipping Act, 2001, or (iv) if the ladder is part of pilot transfer equipment referred to in Regulation 23 of Chapter V of SOLAS, IMO Resolution A.889(21), Pilot Transfer Arrangements. (6) Paragraph 5(g) does not apply to accommodation ladders or gangways constructed prior to the coming into force of these Regulations. (7) Every means of access must be thoroughly examined by a qualified person at least once every year by a detailed visual examination supplemented, if necessary, by non-destructive testing, dismantling of components, measurement of corrosion, deformation and wear, evaluation of structural and moving parts under working conditions and any other means, in order to arrive at a reliable conclusion as to the safety of the means of access and to ensure that the following conditions are met: (a) the loose gear used with it is in good working order; (b) the parts that align and swivel under load are free; (c) the mechanical, electrical, gearing, hydraulic and pneumatic systems are in good working order; (d) parts are not affected by corrosion to the extent that they are no longer functional; and (e) no defects or signs of permanent deformation are detected. (8) If a means of access is being used by persons to board or disembark from a vessel, at least one end of it must be fastened securely and, if necessary to minimize its movement, an employee, other than an employee engaged in manoeuvring the vessel, must be stationed to assist the persons using it. (9) A safety net must be fitted under every part of a ladder, accommodation ladder or gangway, except if (a) the ladder or gangway and the approaches to it are constructed in a manner that makes the fitting of a safety net unnecessary; or (b) the fitting of a safety net is not possible. (10) Every safety net referred to in subsection (9) must (a) extend on both sides of the ladder, accommodation ladder or gangway for a distance of 1.8 m; (b) be kept taut at all times; (c) if feasible, protect the entire length of the means of access; and (d) meet the standards referred to in section 17. (11) If a platform is provided at the bottom of a means of access, the platform must be flat and horizontal. 13 (1) Unless otherwise permitted by this Part, a scaffold must meet the requirements set out in one or more of the following standards: (a) ANSI/ASSE Standard A10.8-2001, Scaffolding Safety Requirements; (b) ANSI/ALI Standard A14.7-2006, American National Standard for Mobile Ladder Stands and Mobile Ladder Stand Platforms; or (c) CSA Standard CAN/CSA-Z271-98 (R2004), Safety Code for Suspended Elevating Platforms. (2) The erection, use, dismantling and removal of a scaffold must be carried out by or under the supervision of a qualified person. (3) If a scaffold is erected on an uneven surface, it must be provided with base plates that maintain its stability. (4) Every scaffold must be capable of supporting at least four times the load that is likely to be imposed on it. (5) Every scaffold must (a) have a platform that is at least 500 mm wide and securely fastened in place; and (b) have a flat and horizontal working surface. 14 (1) Every stage must (a) have a flat and horizontal working surface capable of supporting any load that is likely to be imposed on it; and (b) be fitted with a means of holding the stage away from the working area. (2) The supporting structure and the ropes or tackle supporting a stage must have a safety factor of not less than six. 15 (1) Commercially manufactured portable ladders must meet the requirements set out in one or more of the following standards: (a) CSA Standard CAN3-Z11-M81 (R2005), Portable Ladders; (b) ANSI/ALI Standard A14.1 -2007, American National Standard for Ladders - Wood - Safety Requirements; or (c) ANSI/ALI Standard A14.2 -2007, American National Standard for Ladders - Portable Metal - Safety Requirements. (2) Every portable ladder, while being used, must be (a) placed on a firm footing; and (b) secured in a manner that it cannot be dislodged accidentally from its position. (3) Every ladder, whether portable or permanently secured, must be positioned in a manner so that it is not necessary for a person to use the underside of the ladder. (4) If a ladder provides access from one level to another, the ladder must extend, if feasible, at least three rungs above the higher level or, if it is not feasible, handholds must be provided. (5) A metal or wire rope ladder must not be used if there is a hazard that it may come into contact with any live electrical circuit or electrical equipment. (6) An employee must not work from any of the three top rungs of any single or extension portable ladder or from either of the two top steps of any step ladder. (7) A non-metallic portable ladder must not be painted. (8) Every rope ladder must be of sufficient length to reach the intended landing point, unless the distance from the water to the point of access is more than 9 m, in which case a rope ladder is not to be used. (9) The means of attaching a rope ladder to a vessel must be securely rigged and maintained in a safe condition. (10) A rope ladder must be equipped with flat wooden treads — at regular intervals with treads wider than the width of the ladder — and be installed in a manner that reduces movement of the ladder. (11) A rope ladder must not be used to provide access to places on shore except in case of emergency. (12) When it is necessary to ensure safety, a person must be stationed at the bottom of a ladder to assist the person using the ladder. 16 (1) A raised structure or a deck opening that has a coaming height of less than 900 mm, from which there is a drop of more than 1.2 m, and to which an employee has access, must have a guardrail. (2) Every guardrail must consist of (a) a horizontal top rail or line not less than 900 mm and not more than 1100 mm above the base of the guardrail; (b) a horizontal intermediate rail or line spaced midway between the top rail or line and the base of the guardrail; and (c) supporting posts spaced not more than 3 m apart at their centres. (3) Every guardrail must be designed to withstand the greater of (a) the maximum load that is likely to be imposed on it, and (b) a static load of not less than 890 N applied in any direction at any point on the top rail or line. (4) If there is risk that tools or other objects could fall from a scaffold, a stage or any other raised structure onto a person, the employer must install (a) a toe board that extends from the floor of the platform or other raised structure to a height of not less than 125 mm; or (b) a solid or mesh panel that extends from the floor of the platform or other raised structure to a height of not less than 450 mm, if the tools or other objects are piled to a height that a toe board will not prevent them from falling. (5) If the installation of a toe board is not feasible on a scaffold, a stage or any other raised structure, all tools or other objects that could fall on a person must be (a) tied in a manner that will protect any persons beneath, if the tools or other objects fall; or (b) placed in a way that they will be caught by a safety net positioned so as to protect from injury any persons on or below the raised area, if the tools or the other objects fall. 17 The design, construction and installation of a safety net referred to in subsection 12(9), paragraphs 16(5)(b) and 147(1)(b) must meet the standards set out in ANSI/ASSE Standard A10.11-1989 (R1998), Safety Requirements for Safety Nets. 18 (1) If feasible, the working surface used by an employee must be kept free of grease, oil or any other slippery substance and of any material or object that may create a hazard to an employee. (2) Every work area used by an employee must be kept free of accumulations of ice and snow while the area is in use. 19 (1) This Part applies to crew accommodation. (2) The following provisions do not apply in respect of a day vessel: (a) sections 20 to 40; (b) sections 42 to 45; and (c) sections 51 to 54. (3) [Repealed, SOR/2023-257, s. 403] (3.1) [Repealed, SOR/2023-257, s. 403] (4) [Repealed, SOR/2023-257, s. 403] (5) [Repealed, SOR/2023-257, s. 403] 20 [Repealed, SOR/2023-257, s. 404] 21 [Repealed, SOR/2023-257, s. 404] 22 [Repealed, SOR/2023-257, s. 404] 23 [Repealed, SOR/2023-257, s. 404] 24 (1) [Repealed, SOR/2023-257, s. 405] (2) [Repealed, SOR/2023-257, s. 405] (3) The deck covering in every crew accommodation must be kept free of grease, oil or any other slippery substance and any material or object that may create a hazard to an employee. 25 [Repealed, SOR/2023-257, s. 406] 26 [Repealed, SOR/2023-257, s. 407] 27 [Repealed, SOR/2023-257, s. 407] 28 [Repealed, SOR/2023-257, s. 407] 29 [Repealed, SOR/2023-257, s. 407] 30 [Repealed, SOR/2023-257, s. 407] 31 [Repealed, SOR/2023-257, s. 407] 32 [Repealed, SOR/2023-257, s. 408] 33 [Repealed, SOR/2023-257, s. 408] 34 [Repealed, SOR/2023-257, s. 408] 35 [Repealed, SOR/2023-257, s. 408] 36 (1) [Repealed, SOR/2023-257, s. 409] (2) The employer must provide a set of clean bedding to be used on board a vessel during the employee’s service. (3) The bedding set must, at a minimum, consist of the following items of appropriate size for the berth: (a) one pillow; (b) one pillow case; (c) two flat bedsheets; and (d) one blanket. (4) The employee must return the bedding set on completion of service on board a vessel. 37 [Repealed, SOR/2023-257, s. 410] 38 [Repealed, SOR/2023-257, s. 410] 39 [Repealed, SOR/2023-257, s. 410] 40 [Repealed, SOR/2023-257, s. 410] 41 (1) If an employee is required to eat on board a vessel there must be, if feasible, a galley or dining area that is equipped with, at a minimum, the following items: (a) [Repealed, SOR/2023-257, s. 411] (b) a microwave oven; (c) a toaster; (d) a refrigerator or a cooler; (e) dish washing facilities; and f) pots, pans, strainers, dishes and utensils, in sufficient number to accommodate the greatest number of employees that could use them at any one time. (2) Every dining area provided by the employer must be (a) [Repealed, SOR/2023-257, s. 411] (b) provided with non-combustible covered receptacles for the disposal of food waste or garbage; and (c) separated from any place where a hazardous substance may contaminate food, dishes or utensils. 42 [Repealed, SOR/2023-257, s. 412] 43 [Repealed, SOR/2023-257, s. 412] 44 [Repealed, SOR/2023-257, s. 412] 45 Non-combustible covered receptacles for the disposal of food waste or garbage must be available at all times in mess rooms when employees are on board a vessel. 46 [Repealed, SOR/2023-257, s. 414] 47 [Repealed, SOR/2023-257, s. 414] 48 [Repealed, SOR/2023-257, s. 414] 49 [Repealed, SOR/2023-257, s. 414] 50 [Repealed, SOR/2023-257, s. 414] 51 [Repealed, SOR/2023-257, s. 414] 52 [Repealed, SOR/2023-257, s. 414] 53 [Repealed, SOR/2023-257, s. 414] 54 If an employee is required to live on board a vessel, a recreational facility must be furnished at a minimum with (a) a bookcase that contains vocational and other books, the inventory of which must be adequate for the duration of the voyage and changed at reasonable intervals together with a facility for reading and writing; (b) a radio capable of receiving broadcast on bands such as AM/FM/SW; and (c) a television set equipped with electronic equipment capable of showing films, the inventory of which must be adequate for the duration of the voyage and changed at reasonable intervals. 55 [Repealed, SOR/2023-257, s. 415] 56 [Repealed, SOR/2023-257, s. 415] 57 [Repealed, SOR/2023-257, s. 415] 58 [Repealed, SOR/2023-257, s. 415] 59 [Repealed, SOR/2023-257, s. 415] 60 In this Part, communicable disease has the same meaning as in section 2 of the Quarantine Act. 61 (1) Every employer must maintain each personal service room, galley and pantry used by employees in a clean and sanitary condition. (2) Each personal service room and galley must be cleaned at least once every day that it is used. 62 (1) If a vessel is in operation, an inspection must be made once a week of (a) the supplies of food and water on the vessel; (b) all spaces and equipment used for the storage and handling of food; and (c) the galley and equipment used for the preparation and service of food. (2) A record of each inspection, made in accordance with subsection (1), must be kept by the employer on the vessel for a period of three years after the day on which the inspection is made. 63 All cleaning and sweeping that may cause dusty or unsanitary conditions must be carried out in a manner that will prevent the contamination of the air by dust or other substances injurious to health. 64 If an interior deck on a vessel is normally wet and employees on the vessel do not use non-slip waterproof footwear, the deck must be covered with a dry false floor or platform or treated with a non-slip product or substance. 65 Each container that is used for solid or liquid waste in a work place must (a) be equipped with a tight-fitting cover; (b) be constructed so that it can be easily cleaned and maintained in a sanitary condition; (c) be leak-proof; and (d) if there may be internal pressure in the container, be designed so that the pressure is relieved by controlled ventilation. 66 (1) If feasible, each enclosed part of a work place, personal service room, galley or pantry must be constructed, equipped and maintained in a manner that will prevent the entry of vermin. (2) If vermin have entered any enclosed part of a work place, personal service room, galley or pantry, the employer must immediately take all steps necessary to eliminate the vermin and prevent their re-entry. 67 A person must not use a personal service room for the purpose of storing equipment or supplies unless a closet fitted with a door is provided in that room for that purpose. 68 (1) All reasonable steps must be taken to ensure that personal service rooms are kept mold and mycosis free. (2) [Repealed, SOR/2023-257, s. 416] 69 [Repealed, SOR/2023-257, s. 417] 70 (1) In every sanitary facility, the employer must provide (a) toilet paper on a holder or in a dispenser in each toilet compartment; (b) powdered or liquid soap or other sanitizing agent in a dispenser at each wash basin or between adjoining wash basins; (c) sufficient sanitary hand drying facilities to serve the number of employees using the sanitary facility; (d) a non-combustible container for used disposable towels if disposable towels are provided; (e) menstrual products, including clean and hygienic tampons and menstrual pads; and (f) a covered container lined with a bag that is impervious to moisture for the disposal of menstrual products. (2) If it is not feasible to provide menstrual products in a sanitary facility, the employer must provide them in another location in the same work place that is controlled by the employer, accessible by employees at all times and offers a reasonable amount of privacy. 71 In every personal service room that contains a wash basin, the employer must provide (a) powdered or liquid soap or other sanitizing agent in a dispenser at each wash basin or between adjoining wash basins; (b) sufficient sanitary hand drying facilities to serve the number of employees using the personal service room; and (c) a non-combustible container for the disposal of used towels if towels are provided. 72 (1) Every shower must be provided with (a) hot and cold water; and (b) soap or other sanitizing agent. (2) If duck-boards are used in showers, they must not be made of wood. 73 (1) Every employer must ensure that employees are provided with potable water for drinking, personal washing and food preparation. (2) The potable water must (a) be in sufficient quantity to meet the purposes set out in subsection (1); and (b) meet the quality guidelines set out in the most recent edition of Guidelines for Canadian Drinking Water Quality, prepared by the Federal-Provincial-Territorial Committee on Drinking Water and published by the Department of Health. (3) Potable water for drinking must be available at all times for the use of every employee working on the vessel. 74 (1) Every employer must develop a potable water quality management program that sets out the testing procedures and frequency and the measures to be taken to prevent contamination. (2) The potable water management program must be made readily available for inspection. 75 (1) Every vessel of 300 gross tonnage or more that is not a day vessel must have on board a supply of water that is available for all wash basins, tubs and showers and is sufficient to provide at least 68 l of water for each employee on the vessel for each day that the employee spends on that vessel. (2) A day vessel must have on board at least 22.7 l of water for each employee on the vessel for each day that the employee spends on that vessel. 76 If it is necessary to transport water for drinking, personal washing or food preparation, only sanitary portable water containers must be used. 77 If a portable storage container for drinking water is used, (a) the container must be securely closed; (b) the container must be used only for storing potable water; (c) the container must not be stored in a sanitary facility; and (d) the water must be drawn from the container by (i) a tap, (ii) a ladle used only for the purpose of drawing water from the container, or (iii) any other means that precludes the contamination of the water. 78 Any ice that is added to drinking water or used for the contact refrigeration of foodstuffs must be made from potable water, and stored and handled so as to prevent contamination. 79 If drinking water is supplied by a drinking fountain, (a) the fountain must meet the standards set out in the Air-Conditioning and Refrigeration Institute (ARI) standard ARI 1010-2002, entitled Self-Contained, Mechanically-Refrigerated Drinking-Water Coolers, as amended from time to time; and (b) the fountain must not be installed in a sanitary facility. 80 Each food handler must be trained and instructed in food handling practices that prevent the contamination of food. 81 A person who is suffering from a communicable disease must not must work as a food handler. 82 [Repealed, SOR/2024-118, s. 19] 83 (1) Foods that require refrigeration to prevent them from becoming hazardous to health must be maintained at a temperature of 4°C or lower. (2) Foods that require freezing to prevent them from becoming hazardous to health must be maintained at a temperature of –18°C or lower. 84 All equipment and utensils that come into contact with food must be (a) designed to be easily cleaned; (b) smooth, free from cracks, crevices, pitting or unnecessary indentations; and (c) cleaned and stored to maintain their surfaces in a sanitary condition. 85 No person must eat, prepare or store food in (a) a place where a hazardous substance may contaminate food, dishes or utensils; (b) a personal service room that contains a water closet, urinal, tub or shower; or (c) any other place where food may be contaminated. 86 Food waste or garbage must not be stored in a galley. 87 Garbage must be held in leak-proof, non-absorptive, easily cleaned containers with tight-fitting covers. 88 Dry food waste and garbage must be removed or incinerated. 89 (1) Food waste and garbage containers must be kept covered and the food waste and garbage removed as frequently as is necessary to prevent unsanitary conditions. (2) Food waste and garbage containers must be cleaned and disinfected in an area separate from the galley each time they are emptied. 90 [Repealed, SOR/2020-130, s. 49] 91 Fire protection equipment must be installed, inspected and maintained on board every vessel. 92 Emergency evacuation equipment must be installed, inspected and maintained on board every vessel. 93 (1) Every employer must prepare emergency procedures, including evacuation procedures. (2) Notices that set out the details of the emergency procedures must be posted in conspicuous places that are accessible to every employee in the work place. 94 Every employee must be trained and instructed in (a) the procedures to be followed by an employee in the event of an emergency; and (b) the location, use and operation of fire protection equipment and emergency equipment provided by the employer. 95 (1) A visual inspection of every vessel must be carried out by a qualified person at least once every six months and must include an inspection of all fire escapes, exits and stairways and fire protection equipment on board the vessel in order to ensure that they are in serviceable condition and ready for use at all times. (2) A record of each inspection must be dated and signed by the person who carried out the inspection and kept by the employer on board the vessel for a period of two years after the day on which it is signed. 96 [Repealed, SOR/2020-130, s. 50] 97 [Repealed, SOR/2020-130, s. 50] 98 [Repealed, SOR/2020-130, s. 50] 99 [Repealed, SOR/2020-130, s. 50] 100 [Repealed, SOR/2020-130, s. 50] 101 [Repealed, SOR/2020-130, s. 50] 102 [Repealed, SOR/2020-130, s. 50] 103 [Repealed, SOR/2020-130, s. 50] 104 [Repealed, SOR/2020-130, s. 50] 105 The following definitions apply in this Part. detached work place means a work place away from a vessel where employees normally employed on the vessel are engaged in work related to the operation of the vessel for extended periods of time. (lieu de travail isolé) first aid room means a room used exclusively for first aid or medical purposes. (salle de premiers soins) health unit means a consultation and treatment facility that is in the charge of a person who is a registered nurse under the laws of any province. (service de santé) medical facility means a medical clinic or the office of a physician. (installation médicale) medicine chest means a container in which an assortment of medicines is stored. (pharmacie de bord) 106 [Repealed, SOR/2021-122, s. 34] 107 (1) A vessel must carry a complete and up-to-date list of radio stations from which medical advice can be obtained. (2) If a vessel is equipped with a system of satellite communication, it must carry a complete and up-to-date list of coast earth stations from which medical advice can be obtained. 108 Employees with responsibility for medical care or first aid must be instructed by the employer in the use of the ship’s medical guide and in the medical section of the most recent edition of the International Code of Signals so that they can understand the type of information needed by the advising doctor and the advice received. 109 Every employer must (a) establish written instructions that provide for the prompt rendering of first aid to an employee for any injury, disabling injury or illness; (b) make a copy of the instructions readily available for examination by employees; and (c) if a cargo that is classified dangerous, within the meaning of the Transportation of Dangerous Goods Act, 1992, has not been included in the most recent edition of the Medical First Aid Guide for Use in Accidents Involving Dangerous Goods published by the IMO, ILO and World Health Organization, make readily available to employees the necessary information on the nature of the substances in the cargo, the risks involved, the necessary personal protection equipment required, the relevant medical procedures and specific antidotes. 110 If an employee sustains an injury or becomes aware that they have a disabling injury or illness, the employee must, if feasible, report immediately for first aid to a person who holds a first aid certificate. 111 (1) The employer must ensure that on board every vessel (a) there is at least one person who holds a first aid certificate and who can immediately render first aid to employees who are injured or ill; and (b) for every work place at which employees are working on live electrical equipment, there is at least one employee who has, in the 12 months before the performance of the work on the electrical equipment, successfully completed a course in cardiopulmonary resuscitation given by an approved organization. (2) Subsection (1) does not apply to shore-based employees for whom a first aid room, a health unit or a medical facility is provided on shore. 112 Emergency medical and dental care while employees are on board a vessel or landed in a foreign port must be provided free of charge. 113 Measures must be taken to ensure that employees have access, when in port, to (a) outpatient treatment for injury and illness; (b) hospitalization when necessary; and (c) dental treatment. 114 (1) The employer must provide and maintain for a work place set out in column 1 of Table 1 to this section the type of first aid kit set out in column 2 and a medical guide. (2) The first aid kit and its contents, as well as the medical equipment and medical guide carried on board a vessel, must be properly maintained and inspected at regular intervals of not more than 12 months, by a qualified person to ensure that supplies and equipment are properly stored and labelled with directions for their use and their expiry date, that all equipment functions as required and that all supplies have not reached or exceeded their expiry dates and are not set to expire before to the next scheduled inspection date. (3) Every first aid kit must be (a) accessible when an employee is on board the vessel; and (b) clearly identified by a conspicuous sign. (4) A first aid kit must contain the supplies and equipment set out in column 1 of Table 2 to this section in the applicable quantities set out in column 2. 115 (1) Every vessel that is engaged on an unlimited voyage, a near coastal voyage, Class 1 or an international voyage of more than three days’ duration, other than an inland voyage, must carry a medicine chest, medical equipment and the most recent edition of the International Medical Guide for Ships, published by the World Health Organization. (2) The medicine chest and its contents, as well as the medical equipment and the International Medical Guide for Ships must be properly maintained and inspected at regular intervals of not more than 12 months by a qualified person to ensure that supplies and medicines are properly stored and labelled with directions for their use and their expiry date, that all equipment functions as required and that all supplies and medicines have not reached or exceeded their expiry dates and are not set to expire before the next scheduled inspection date. (3) Every medicine chest must be (a) accessible when an employee is on board the vessel; and (b) clearly identified by a conspicuous sign. (4) The employer must provide and maintain a medicine chest with supplies and medicine in accordance with the recommendations of the most recent version of the International Medical Guide for Ships, taking into consideration the particulars of the intended voyage. 116 If a hazard of skin or eye injury from a hazardous substance exists in a work place, shower facilities to wash the skin and eye wash facilities to irrigate the eyes must be provided for immediate use by employees or, if it is not feasible to do so, portable equipment must be provided. 117 Before assigning employees to a detached work place, the employer must provide them with the following for that work place: (a) suitable means of transporting an injured employee to the vessel, a medical facility or a hospital; (b) a person who holds a first aid certificate to accompany an injured employee and to render first aid in transit if required; and (c) a means of communication between the detached work place and the vessel. 118 (1) Subject to subsection (2), an employer must post and keep posted in a conspicuous place accessible to every employee on board a vessel (a) a description of the first aid to be rendered for any injury, disabling injury or illness; and (b) information regarding the location of medicine chests. (2) At a detached work place, the information referred to in subsection (1) must be kept inside the first aid kit referred to in section 114. 119 (1) If an injured or ill employee reports for first aid to a person in accordance with section 110 or if a person who holds a first aid certificate renders first aid to an employee, the person must (a) enter in a first aid record the following information: (i) the date and time of the reporting of the injury, disabling injury or illness, (ii) the full name of the injured or ill employee, (iii) the date, time and location of the occurrence of the injury, disabling injury or illness, (iv) a brief description of the injury, disabling injury or illness, (v) a brief description of the first aid rendered, if any, and (vi) a brief description of arrangements made for the treatment or transportation of the injured or ill employee; and (b) sign the first aid record beneath the information entered in accordance with paragraph (a). (2) The employer must keep a first aid record for a period of two years after the day on which information is entered in it. 120 The employer must, in consultation with and with the participation of the policy committee, or, if there is no policy committee, the work place committee or the health and safety representative, develop, implement and monitor a program for the prevention of hazards, including ergonomics-related hazards, in the work place that is appropriate to the size of the work place and the nature of the hazards and that includes the following components: (a) an implementation plan; (b) a hazard identification and assessment methodology; (c) hazard identification and assessment; (d) preventive measures; (e) employee training; and (f) a program evaluation. 121 (1) The employer must (a) develop an implementation plan that specifies the time frame for each phase of the development and implementation of the prevention program; (b) monitor the progress of the implementation of the preventive measures; and (c) review the time frame of the implementation plan regularly and, if necessary, revise it. (2) In implementing the prevention program, the employer must ensure, if feasible, that ergonomics-related hazards are identified and assessed and that they are eliminated or reduced, as required by subsection 124(1), and that any person assigned to identify and assess ergonomics-related hazards has the necessary instructions and training. 122 (1) The employer must develop a hazard identification and assessment methodology, including an identification and assessment methodology for ergonomics-related hazards, taking into account the following documents and information: (a) any hazardous occurrence investigation reports; (b) first aid records and minor injury records; (c) work place health protection programs; (d) results of any work place inspections; (e) any employee reports made under paragraph 126(1)(g) or (h) of the Act or under section 275; (f) any government or employer reports, studies and tests concerning the health and safety of employees; (g) any reports made under the Safety and Health Committees and Representatives Regulations; (h) the record of hazardous substances; and (i) any other relevant information, including ergonomics-related information. (2) The hazard identification and assessment methodology must include (a) the steps and time frame for identifying and assessing the hazards; (b) the keeping of a record of the hazards; and (c) a time frame for reviewing and, if necessary, revising the methodology. 123 (1) The employer must identify and assess the hazards in the work place, including ergonomics-related hazards, in accordance with the methodology developed under section 122 and taking into account (a) the nature of the hazard; (b) in the case of ergonomics-related hazards, all ergonomics-related factors, such as (i) the physical demands of the work activities, the work environment, the work procedures, the organization of the work and the circumstances in which the work activities are performed, and (ii) the characteristics of materials, goods, persons, animals, things and workspaces and the features of tools and equipment; (c) the employees’ level of exposure to the hazard; (d) the frequency and duration of the employees’ exposure to the hazard; (e) the effects, real or apprehended, of the exposure on the health and safety of the employee; (f) the preventive measures in place to address the hazard; (g) any employee reports made under paragraphs 126(1)(g) or (h) of the Act or under section 275; and (h) any other relevant information. (2) The employer must assess a cargo hold in accordance with subsection (1) to determine if it is a confined space and each time there is a change in conditions that may create a hazard. 124 (1) The employer must, in order to address identified and assessed hazards, including ergonomics-related hazards, take preventive measures to address the assessed hazard in the following order of priority: (a) the elimination of the hazard, including by way of engineering controls which may involve mechanical aids, equipment design or redesign that take into account the physical attributes of the employee; (b) the reduction of the hazard, including isolating it; (c) the provision of personal protection equipment, clothing, devices or materials; and (d) administrative procedures respecting, among other things, work permits issued under Part 13, the management of hazard exposure and recovery periods and the management of work patterns and methods. (2) As part of the preventive measures, the employer must develop and implement a preventive maintenance program in order to avoid failures that could result in a hazard to employees. (3) The employer must ensure that any preventive measure must not in itself create a hazard and must take into account the effects on the work place. (4) The preventive measures must include steps to address (a) newly identified hazards in an expeditious manner; and (b) ergonomics-related hazards that are identified when planning implementation of change to the work environment or to work duties, equipment, practices or processes. 125 (1) The employer must provide each employee with health and safety training, including training relating to ergonomics, which must include the following: (a) the hazard prevention program implemented in accordance with this Part to prevent hazards applicable to the employee, including the hazard identification and assessment methodology and the preventive measures taken by the employer; (b) the nature of the work place and the hazards associated with it; (c) the employee’s duty to report under paragraphs 126(1)(g) and (h) of the Act and under section 275; and (d) an overview of the Act and these Regulations. (2) The employer must provide an employee with training (a) when new information in respect of a hazard in the work place becomes available to the employer; and (b) before the employee is assigned a new activity or exposed to a new hazard. (3) The employer must review the employee training program and, if necessary, revise it (a) at least once every three years; (b) when there is a change in conditions in respect of a hazard; and (c) when new information in respect of a hazard in the work place becomes available to the employer. (4) Each time an employee is provided with training, the employee must acknowledge in writing that they received it and the employer must acknowledge in writing that they provided it. (5) The employer must keep, in paper or electronic form, records of the training that each employee is provided with for a period of two years after the day on which the employee ceases to be exposed to a hazard. 126 (1) The employer must evaluate the effectiveness of the hazard prevention program, including its ergonomics-related components, and, if necessary, revise it (a) at least once every three years; (b) when there is a change in conditions in respect of a hazard; and (c) when new information in respect of a hazard in the work place becomes available to the employer. (2) The evaluation of the effectiveness of the prevention program must be based on the following documents and information: (a) conditions related to the work place and the activities of the employees; (b) any work place inspection reports; (c) any hazardous occurrence investigation reports; (d) any safety audits; (e) first aid records and any injury statistics, including records and statistics relating to ergonomics-related first aid and injuries; (f) any observations of the policy and work place committees, or the health and safety representative, on the effectiveness of the prevention program; and (g) any other relevant information. 127 (1) If a program evaluation has been conducted under section 126, the employer must prepare a program evaluation report. (2) The employer must keep every program evaluation report for a period of six years after the day on which the report is prepared and make it readily available for examination for that period. 128 The employer must ensure that all diving operations from a vessel meet the same requirements as those set out in Part XVIII of the Canada Occupational Health and Safety Regulations. 129 The following definitions apply in this Part. boatswain’s chair means a single-point adjustable suspension scaffold consisting of a seat or sling designed to accommodate one employee in a sitting position. (chaise de gabier) persons transfer apparatus includes a platform, bucket, landing boom or basket or boatswain’s chair designed specifically for the purpose of transporting, lifting, moving and positioning persons. (appareil de transbordement de personnes) 130 This Part applies to every persons transfer apparatus used for the purpose of carrying persons on board a vessel, and every safety device attached to that apparatus. 131 (1) Every persons transfer apparatus and every safety device attached to it must (a) if feasible, meet the standards set out in the applicable standard referred to in subsection (2); and (b) be used, operated and maintained in accordance with the standards set out in the applicable standard referred to in subsection (2). (2) For the purposes of subsection (1), the applicable standard for (a) elevators, dumbwaiters and escalators is ASME A17.1-2007/CSA B44-07, Safety Code for Elevators and Escalators, and CSA Standard CAN/CSA-B44.1/ASME-A17.5-04, Elevator and Escalator Electrical Equipment; (b) manlifts is CSA Standard CAN/CSA-B311-02, Safety Code for Manlifts; (c) personnel hoists is CSA Standard CAN/CSA-Z185-M87 (R2006), Safety Code for Personnel Hoists; (d) lifts for persons with physical disabilities is CSA Standard CAN/CSA B355-00 (R2005), Lifts for Persons with Physical Disabilities; (e) descent control devices is CSA Standard Z259.3-99 (R2004), Descent Control Devices; and (f) landing booms is the most recent edition of The Seaway Handbook, issued by St. Lawrence Seaway Management Corporation. 132 (1) A persons transfer apparatus on a vessel must not be used or operated in the following circumstances: (a) with a load in excess of the load that it was designed and installed to move safely; or (b) when the roll of the vessel is more than the maximum roll for the safe operation of the persons transfer apparatus recommended by the manufacturer. (2) A persons transfer apparatus must not be used or operated while any safety device attached to it is inoperative. (3) A safety device attached to a persons transfer apparatus must not be altered, interfered with or rendered inoperative. (4) Subsections (2) and (3) do not apply in respect of a persons transfer apparatus or a safety device that is being inspected, tested, repaired or maintained by a qualified person. 133 (1) A persons transfer apparatus must not be used to transfer freight unless the apparatus is specifically designed for freight and people or if there is an emergency. (2) Every transfer of a person by means of a persons transfer apparatus must be made only when visibility and environmental conditions are such that the transfer can be made safely. (3) If a person is transferred by means of a persons transfer apparatus from one place to another on the vessel or from the vessel to another place off a vessel or vice versa, (a) the person in charge of the transfer operation must be in direct radio contact with the operator of the apparatus; and (b) the person to be transferred must (i) be instructed in the safety procedures to be followed by them, (ii) wear a flotation suit if the conditions warrant, and (iii) must use a life jacket or a personal flotation device unless, if for medical or emergency reasons, it is not feasible to wear one. (4) If a person is transferred by a basket to or from a drilling unit or an offshore production facility, the drilling unit or production facility must be equipped with at least two buoyant baskets. (5) For the purposes of subsection (4), basket, drilling unit, offshore and production facility have the same meaning as in section 1.1 of the Oil and Gas Occupational Safety and Health Regulations. 134 (1) A boatswain’s chair must provide stable and adequate support for the user. (2) A boatswain’s chair must be suspended from a parapet clamp, cornice hook, thrust-out beam or other solid anchorage having a working load limit that is at least equivalent to that of the suspension system for the boatswain’s chair. 135 A boatswain’s chair must only be used when visibility and weather conditions permit its safe use. 136 (1) Every persons transfer apparatus must be inspected and found to be in serviceable condition before each use and all ropes, wires or other vital parts that show signs of significant wear must be replaced before the apparatus is used. (2) Every persons transfer apparatus and every safety device attached to it must be inspected and tested by a qualified person to ascertain that the requirements referred to in section 131 are met (a) before the persons transfer apparatus and any safety device attached to it are operated; (b) after an alteration to the persons transfer apparatus or any safety device attached to it; and (c) once every 12 months. (3) A record of each inspection and test made in accordance with subsection (2) must (a) be made and signed by the qualified person who made the inspection and performed the test; (b) include the date of the inspection and test and the identification and location of the persons transfer apparatus and any safety devices that were inspected and tested; (c) set out the observations of the qualified person on the safety of the apparatus and any safety device; (d) be kept by the employer on the vessel on which the persons transfer apparatus is located for a period of two years after the day on which the inspection is signed; and (e) be made readily available for examination by the operator of the apparatus. 137 Repair and maintenance of a persons transfer apparatus or a safety device attached to it must be performed by a qualified person appointed by the employer. 138 (1) The employer must ensure that every person granted access to a work place who is exposed to a health or safety hazard uses the protection equipment prescribed by this Part (a) if it is not feasible to eliminate a health or safety hazard in a work place or to control it within safe limits; and (b) if the use of the protection equipment may prevent or reduce injury from that hazard. (2) All protection equipment must (a) be designed to protect the person from the hazard for which it is provided; (b) not in itself create a hazard; (c) be maintained, inspected and tested by a qualified person; and (d) if necessary to prevent a health hazard, be maintained in a clean and sanitary condition by a qualified person. 139 If there is a hazard of head injury in a work place, the employer must provide protective headwear that meets the standards set out in CSA Standard CAN/CSA-Z94.1-05, Industrial Protective Headwear - Performance, Selection, Care, and Use. 140 (1) If there is a hazard of a foot injury or electric shock through footwear in a work place, the employer must ensure that every person granted access to that work place uses protective footwear that meets the standards set out in CSA Standard CAN/CSA-Z195-02 (R2008), Protective Footwear. (2) If there is a hazard of slipping in a work place, non-slip footwear must be used. 141 If there is a hazard of injury in a work place to the eyes, face, ears or front of the neck, the employer must provide eye or face protectors that meet the standards set out in CSA Standard Z94.3-07, Eye and Face Protectors. 142 (1) If there is a risk of injury or disease due to exposure to an oxygen deficient atmosphere in a work place, the employer must provide every person who is granted access to the work place with respiratory protective equipment or a breathing apparatus by means of which air will be supplied and that meets the following requirements: (a) it is listed in the NIOSH publication entitled Certified Equipment List, as amended from time to time; and (b) it protects the respiratory tract against the oxygen deficiency. (2) If there is a risk of injury or disease due to exposure to an airborne hazardous substance in a work place, the employer shall provide every person who is granted access to the work place with respiratory protective equipment or a breathing apparatus that meets the following requirements: (a) if air is supplied by means of the respiratory protective equipment or breathing apparatus, it is listed in the NIOSH publication entitled Certified Equipment List, as amended from time to time; (b) if air is not supplied by means of the respiratory protective equipment or breathing apparatus, it is listed (i) in the NIOSH publication entitled Certified Equipment List, as amended from time to time, or (ii) in the CSA Group publication entitled CSA Group Product Listing, as amended from time to time; (c) for respiratory protective equipment or a breathing apparatus referred to in subparagraph (b)(ii), it meets the requirements set out in CSA Standard Z94.4.1, Performance of filtering respirators; and (d) it protects the respiratory tract against the hazardous substance. (3) The respiratory protective equipment or breathing apparatus referred to in subsection (1) or (2) must be selected, fitted, cared for, used and maintained in accordance with CSA Standard Z94.4, Selection, use, and care of respirators. (4) The employer must ensure that the air that is supplied by means of

    The text continues in the official source.

    Related guides, FAQ and contract templates