Beta
21 CFR § 1114.7
21 CFR § 1114.7 — § 1114.7 Required content and format.
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI§ 1114.7 Required content and format.
(a) General. The PMTA must contain sufficient information for FDA to determine whether any of the grounds for marketing denial order specified in section 910(c)(2) of the Federal Food, Drug, and Cosmetic Act apply. The application must contain the following sections:
(1) General information (as described in paragraph (c) of this section);
(2) Descriptive information (as described in paragraph (d) of this section);
(3) Product samples (as described in paragraph (e) of this section);
(4) Labeling and description of marketing plans (as described in paragraph (f) of this section);
(5) Statement of compliance with 21 CFR part 25 (as described in paragraph (g) of this section);
(6) Summary (as described in paragraph (h) of this section);
(7) Product formulation (as described in paragraph (i) of this section);
(8) Manufacturing (as described in paragraph (j) of this section);
(9) Health risk investigations (as described in paragraph (k) of this section); and
(10) The effect on the population as a whole (as described in paragraph (l) of this section);
(11) Certification statement (as described in paragraph (m) of this section).
(b) Format. (1) The application must be submitted using the form(s) that FDA provides, contain a comprehensive index ( i.e., a listing of files and data associated with those files) and table of contents, be well-organized and legible, and be written in English. Documents that have been translated from another language into English ( e.g., original study documents written in a language other than English) must be accompanied by: The original language version of the document, signed a statement by an authorized representative of the manufacturer certifying that the English language translation is complete and accurate, and a brief statement of the qualifications of the person that made the translation. As described in § 1114.49, the applicant must submit the application and all information supporting the application in an electronic format that FDA can process, read, review, and archive, unless FDA has granted a waiver.
(2) An applicant may include content in a submission by cross-reference to a tobacco product master file or a pending modified risk tobacco product application for the same tobacco product. Applicants using a master file must provide documentation of their right of reference for the master file and clearly identify the specific content being incorporated into the PMTA submission. Except as provided for in §§ 1114.15 and 1114.17, FDA will not consider content included by cross-reference to other sources of information outside of the submission.
(c) General information. The applicant must, by using the form(s) FDA provides, specify the following general information:
(1) Applicant name, address, and contact information;
(2) Authorized representative or U.S. agent (for a foreign applicant), including the name, address, and contact information;
(3) The following information to uniquely identify the product:
(i) Manufacturer;
(ii) Product name(s), including brand and subbrand (or other commercial name(s) used in commercial distribution); and
(iii) The product category, product subcategory, and product properties as provided in the following table. If the product does not have a listed product property, such as ventilation or characterizing flavor, the application must state “none” for that property.
Table 1 to Paragraph ( c )(3)( iii )
Tobacco product category
Tobacco product subcategory
Product properties
(A) Cigarettes
( 1 ) Filtered
—Package type (e.g., hard pack, soft pack, clam shell).
—Product quantity (e.g., 20 cigarettes, 25 cigarettes).
—Length (e.g., 89.1 millimeters (mm), 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Ventilation (e.g., none, 10.0%, 25.0%).
—Characterizing flavor(s) (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Non-filtered
—Package type (e.g., hard pack, soft pack, clam shell).
—Product quantity (e.g., 20 cigarettes, 25 cigarettes).
—Length (e.g., 89.1 mm, 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Characterizing flavor(s) (e.g., none, menthol).
— Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Other
—Package type (e.g., hard pack, soft pack, clam shell).
—Product quantity (e.g., 20 cigarettes, 25 cigarettes).
—Length (e.g., 89.1 mm, 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Ventilation (e.g., none, 10.0%, 25.0%).
—Characterizing flavor(s) (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
(B) Roll-Your-Own Tobacco Products
( 1 ) Roll-Your-Own Tobacco Filler
—Package type (e.g., bag, pouch).
—Product quantity (e.g., 20.1 grams [g], 16.0 ounces [oz.]).
—Characterizing flavor(s) (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Rolling Paper
—Package type (e.g., box, booklet).
—Product quantity (e.g., 50 sheets, 200 papers).
—Length (e.g., 79.1 mm, 100.0 mm, 110.2 mm).
—Width (e.g., 28.1 mm, 33.0 mm, 45.2 mm).
—Characterizing flavor(s) (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Cigarette Tube, Filtered
—Package type (e.g., bag, box).
—Product quantity (e.g., 100 tubes, 200 tubes).
—Length (e.g., 89.1 mm, 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Ventilation (e.g., none, 10.0%, 25.0%).
—Characterizing flavor(s) (e.g., none, menthol, tobacco).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) Cigarette Tube, Non-filtered
—Package type (e.g., bag, box).
—Product quantity (e.g., 100 tubes, 200 tubes).
—Length (e.g., 89.1 mm, 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, tobacco).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) Filter
—Package type (e.g., bag, box).
—Product quantity (e.g., 100 filters, 200 filters).
—Length (e.g., 8.0 mm, 12.1 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, tobacco).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 6 ) Paper Tip
—Package type (e.g., bag, box).
—Product quantity (e.g., 200 tips, 275 tips).
—Length (e.g., 12.0 mm, 15.1 mm).
—Width (e.g., 27.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, tobacco).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 7 ) Other
—Package type (e.g., bag, box).
—Product quantity (e.g., 200 tips, 100 filters, 200 tubes.
—Characterizing flavor(s) (e.g., none, menthol, tobacco).
—Additional properties needed to uniquely identify the tobacco product.
(C) Smokeless Tobacco Products
( 1 ) Moist Snuff, Loose
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 20.0 g, 2.1 oz.).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable, e.g., fine cut, long cut, straight cut).
( 2 ) Moist Snuff, Portioned
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 22.5 g, 20.0 g).
—Portion count (e.g., 15 pouches, 20 pieces).
—Portion mass (e.g., 1.5 g/pouch, 1.0 g/piece).
—Portion length (e.g., 15.0 mm, 20.1 mm).
—Portion width (e.g., 10.0 mm, 15.1 mm).
—Portion thickness (e.g., 5.0 mm, 7.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Snus, Loose
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 20.0 g, 2.1 oz.).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) Snus, Portioned
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 22.5 g, 20.0 g).
—Portion count (e.g., 15 pouches, 20 pieces).
—Portion mass (e.g., 1.5 g/pouch, 1.0 g/piece).
—Portion length (e.g., 15.0 mm, 20.1 mm).
—Portion width (e.g., 10.0 mm, 15.1 mm).
—Portion thickness (e.g., 5.0 mm, 7.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) Dry Snuff, Loose
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 20.0 g, 2.1 oz.).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 6 ) Dissolvable
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 22.5 g, 20.0 g) —Portion count (e.g., 15 sticks, 20 pieces).
—Portion mass (e.g., 1.5 g/strip, 1.0 g/piece).
—Portion length (e.g., 10.0 mm, 15.1 mm).
—Portion width (e.g., 5.0 mm, 8.1 mm).
—Portion thickness (e.g., 3.0 mm, 4.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 7 ) Chewing Tobacco, Loose
—Package type (e.g., bag, pouch, wrapped).
—Product quantity (e.g., 20.0 g, 3.1 oz).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 8 ) Chewing Tobacco, Portioned
—Package type (e.g., plastic can with metal lid, plastic can with plastic lid).
—Product quantity (e.g., 22.5 g, 20.0 g) —Portion count (e.g., 10 bits).
—Portion mass (e.g., 2.1 g/bit).
—Portion length (e.g., 8.0 mm, 10.1 mm).
—Portion width (e.g., 6.0 mm, 8.1 mm).
—Portion thickness (e.g., 5.1 mm, 7.0 mm).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 9 ) Other
—Package type (e.g., bag, box, can).
—Product quantity (e.g., 20.1 g, 22.5 g, 3.0 oz.).
—Characterizing flavor(s) (e.g., none, menthol, cherry, wintergreen, tobacco).
—Additional properties needed to uniquely identify the tobacco product.
(D) Electronic Nicotine Delivery System (ENDS) (Also referred to as vapes)
( 1 ) E-Liquid, Open
—Package type (e.g., bottle, box, pod).
—Product quantity (e.g., 1 bottle, 5 bottles).
—E-liquid volume (e.g., 0.5 milliliters [ml]), 2.0 ml, 5.1 ml).
—Nicotine concentration (e.g., 0 milligrams/milliliter [mg/ml], 0.2 mg/ml, 0.4 mg/ml, 1%, 0.2 mg/bottle).
—Propylene glycol (PG)/vegetable glycerin (VG) ratio (e.g., not applicable [N/A], 0/100, 50/50, 100/0).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) E-Liquid, Closed
—Package type (e.g., cartridge, pod).
—Product quantity (e.g., 1 cartridge, 5 cartridges).
—E-liquid volume (e.g., 0.5 ml, 2.0 ml, 5.1 ml).
—Nicotine concentration (e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 2.0 mg/bottle).
—PG/VG ratio (e.g., N/A, 0/100, 50/50, 100/0).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) E-Cigarette, Closed
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 e-cigarette, 5 e-cigarettes).
—Length (e.g., 100.0 mm, 120.0 mm).
—Diameter (e.g., 6.0 mm, 8.0 mm).
—Wattage (e.g., 100 watts [W], 200 W).
—Battery capacity (e.g., 100 milliampere hours [mAh], 200 mAh).
—E-liquid volume (e.g., 0.5 ml, 2.0 ml, 5.1 ml).
—Nicotine concentration (e.g., 0 mg/ml, 0.2 mg/ml, 0.4 mg/ml, 1%, 0.2 mg/e-cigarette).
—PG/VG ratio (e.g., N/A, 0/100, 50/50, 100/0).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product.
( 4 ) E-Cigarette, Open
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 e-cigarette, 5 e-cigarettes).
—Length (e.g., 100.0 mm, 120.0 mm).
—Diameter (e.g., 6.0 mm, 8.0 mm).
—E-liquid volume (e.g., 0.5 ml, 2.0 ml, 5.1 ml).
—Wattage (e.g., 100 W, 200 W).
—Battery capacity (e.g., 100 mAh, 200 mAh).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) ENDS Component
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g.,1 coil).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry, wintergreen).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 6 ) ENDS Other
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 e-cigarette, 5 bottles).
—Characterizing flavor(s) (e.g., none, cherry, wintergreen, tobacco, menthol).
—Additional properties needed to uniquely identify the tobacco product.
(E) Cigars
( 1 ) Cigar, Filtered Sheet-Wrapped
—Package type (e.g., hard pack, soft pack, clam shell).
—Product quantity (e.g., 20 filtered cigars, 25 filtered cigars).
—Length (e.g., 89.1 mm, 100.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Ventilation (e.g., none, 0%, 10.0%, 25.0%).
—Characterizing flavor (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Cigar, Unfiltered Sheet-Wrapped
—Package type (e.g., box, film sleeve).
—Product quantity (e.g., 1 cigar, 5 cigarillos).
—Length (e.g., 100.1 mm, 140.0 mm).
—Diameter (e.g., 8.0 mm, 10.1 mm).
—Tip (e.g., none, wood tips, plastic tips).
—Characterizing flavor (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Cigar, Unfiltered Leaf-Wrapped
—Package type (e.g., box, film, sleeve, none).
—Product quantity (e.g., 1 cigar, 5 cigars).
—Length (e.g., 150.1 mm, 200.0 mm).
—Diameter (e.g., 8.0 mm, 10.1 mm).
—Wrapper material (e.g., burley tobacco leaf, Connecticut shade grown tobacco leaf).
—Characterizing flavor (e.g., none, whiskey).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) Cigar Component
—Package type (e.g., box, booklet).
—Product quantity (e.g., 10 wrappers, 20 leaves).
—Characterizing flavor (e.g., none, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) Cigar Tobacco Filler
—Package type (e.g., bag, pouch).
—Product quantity (e.g., 20.0 g, 16.1 oz.).
—Characterizing flavor (e.g., none, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 6 ) Other
—Package type (e.g., box, booklet).
—Product quantity (e.g., 1 cigar, 5 cigars, 20 leaves, 16 g).
—Characterizing flavor(s) (e.g., none, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product.
(F) Pipe Tobacco Products
( 1 ) Pipe
—Package type (e.g., box, none).
—Product quantity (e.g., 1 pipe).
—Length (e.g., 200.0 mm, 300.1 mm).
—Diameter (e.g., 25.1 mm).
—Characterizing flavor(s) (e.g., none, menthol, cavendish, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Pipe Tobacco Filler
—Package type (e.g., bag, none).
—Product quantity (e.g., 20.0 g, 16.1 oz).
—Tobacco cut style (e.g., standard cut, such as shag cut, bugler cut, loose cut, etc., or a pressed cut, such as flake, cube cut, roll cake, etc., or a mixture).
—Characterizing flavor(s) (e.g., none, menthol, cavendish, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Pipe Component
—Package type (e.g., box, bag, none).
—Product quantity (e.g., 1 bowl, 1 stem, 100 filters).
—Characterizing flavor(s) (e.g., none, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) Other
—Package type (e.g., bag, box, none).
—Product quantity (e.g., 1 pipe, 1 bowl, 1 stem, 100 filters).
—Characterizing flavor(s) (e.g., none, cherry).
—Additional properties needed to uniquely identify the tobacco product.
(G) Waterpipe Tobacco Products
( 1 ) Waterpipe
—Package type (e.g., box, none).
—Product quantity (e.g., 1 waterpipe).
—Height (e.g., 200.0 mm, 500.1 mm).
—Width (e.g., 100.1 mm, 300.0 mm).
—Diameter (e.g., 100.1 mm, 300.0 mm)—Number of hoses (e.g., 1, 2, 4).
—Characterizing flavor(s) (e.g., none).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Waterpipe Tobacco Filler
—Package type (e.g., bag, pouch).
—Product quantity (e.g., 20.0 g, 16.1 oz.).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, apple).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) Waterpipe Heat Source
—Package type (e.g., box, film sleeve, bag, none).
—Product quantity (e.g., 150.0 g, 680.0 g).
—Portion count (e.g., 20 fingers, 10 discs, 1 base).
—Portion mass (e.g., 15.0 g/finger, 10.0g/brick).
—Portion length (e.g., 40.0 mm, 100.0 mm).
—Portion width (e.g., 10.0 mm, 40.0 mm).
—Portion thickness (e.g., 10.0 mm, 40.0 mm).
—Source of energy (e.g., charcoal, battery, electrical).
—Characterizing flavor(s) (e.g., none, menthol, apple).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) Waterpipe Component
—Package type (e.g., bag, box, none).
—Product quantity (e.g., 1 base, 1 bowl, 1 hose, 10 mouthpieces).
—Characterizing flavor(s) (e.g., none, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) Waterpipe Other
—Package type (e.g., bag, box, none).
—Product quantity (e.g., 1 base, 1 bowl, 1 hose, 10 mouthpieces).
—Characterizing flavor(s) (e.g., none, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
(H) Heated Tobacco Products (HTP)
( 1 ) Closed HTP
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 device, 1 HTP).
—Length (e.g., 100.0 mm, 120.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Wattage (e.g., 100 W, 200 W).
—Battery capacity (e.g., 100 mAh, 200 mAh).
—Characterizing flavor(s) (e.g., none).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 2 ) Open HTP
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 device, 1 HTP).
—Length (e.g., 100.0 mm, 120.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Wattage (e.g., 100 W, 200 W).
—Battery capacity (e.g., 100 mAh, 200 mAh).
—Characterizing flavor(s) (e.g., none).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 3 ) HTP Consumable
—Package type (e.g., hard pack, soft pack, plastic clamshell).
—Product quantity (e.g., 20 sticks, 25 cartridges).
—Length (e.g., 60.0 mm, 82.0 mm).
—Diameter (e.g., 6.0 mm, 8.1 mm).
—Ventilation (e.g., none, 10.0%, 25.0%).
—Characterizing flavor(s) (e.g., none, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 4 ) HTP Component
—Package type (e.g., box, none, plastic clamshell).
—Product quantity (e.g., 1 mouthpiece, 1 spacer).
—Characterizing flavor(s) (e.g., none, tobacco, menthol).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
( 5 ) Other
—Package type (e.g., box, bag, plastic clamshell, none).
—Product quantity (e.g., 1 base, 5 capsules).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
(I) Other
( 1 ) Other
—Package type (e.g., box, bag, plastic clamshell, none).
—Product quantity (e.g., 1 base, 5 capsules).
—Characterizing flavor(s) (e.g., none, tobacco, menthol, cherry).
—Additional properties needed to uniquely identify the tobacco product (if applicable).
(4) The type of PMTA ( i.e., PMTA, supplemental PMTA, or resubmission);
(5) Whether the applicant requests that FDA refer the PMTA to the Tobacco Products Scientific Advisory Committee (TPSAC);
(6) Identifying information regarding any prior submissions regarding the tobacco product ( e.g., submissions related to investigational tobacco products, substantial equivalence reports, PMTAs), including submission tracking numbers (STNs) where applicable;
(7) Dates and purpose of any prior meetings with FDA regarding the new tobacco product;
(8) If applicable, the dates when the tobacco product was commercially marketed in the United States;
(9) Address and the Facility Establishment Identifier (FEI) number(s), if available, of the establishment(s) involved in the manufacture of the new tobacco product;
(10) A brief statement regarding how the PMTA satisfies the content requirements of section 910(b)(1) of the Federal Food, Drug, and Cosmetic Act;
(11) A brief description of how marketing of the new tobacco product would be appropriate for the protection of the public health; and
(12) A list identifying all enclosures, labels, and labeling being submitted with the application.
(d) Descriptive information. The application must contain descriptive information in this section that outlines the major aspects of the new tobacco product, including the following items:
(1) A concise description of the new tobacco product;
(2) A statement identifying all tobacco product standards issued under section 907 of the Federal Food, Drug, and Cosmetic Act that are applicable to the new tobacco product and a brief description of how the new tobacco product fully meets any identified tobacco product standard, or if the new tobacco product deviates from a product standard, if applicable, the application must include adequate information to identify and justify those deviations;
(3) The name(s) of the product as designated on the product's label;
(4) A description of problems that were identified in prototypes that are the subject of studies in the application and previous or similar versions of the new tobacco product that were marketed, if any. If there are previous or similar versions that are the subject of studies in the application or were marketed, the application must contain a bibliography of all reports regarding the previous or similar version of the product, whether adverse or supportive; and
(5) Any restrictions on the sale, distribution, advertising, or promotion of the new tobacco product that the applicant proposes to be included as part of a marketing granted order under section 910(c)(1)(B) of the Federal Food, Drug, and Cosmetic Act to help support a showing that the marketing of the product is appropriate for the protection of the public health. If there are no proposed restrictions, the application must contain a statement to that effect.
(e) Samples of new tobacco products. After FDA accepts a PMTA for review, it may require the submission of samples of the new tobacco product, including its components and parts. If required, the applicant must submit samples of the finished tobacco product or its components or parts in accordance with instructions provided by FDA. FDA may also require the submission of additional samples to further aid in its review.
(f) Labeling and description of marketing plans —(1) Labeling. The application must contain specimens of all proposed labeling for the new tobacco product, including labels, inserts, onserts, instructions, and other accompanying information. The specimens of labeling must include all panels, reflect the actual size and color proposed to be used for the tobacco product, and include any warning label statements and other information required by regulation or statute, as applicable.
(2) Description of Marketing Plans. A PMTA must contain a description of the applicant's plans to market the new tobacco product, for at least the first year the product would be marketed after receiving a marketing granted order, in way that is both consistent with the applicant's discussion of the increased or decreased likelihood of changes in tobacco product use behavior, including switching, initiation, cessation, and polyuse, under § 1114.7(l), and permits FDA to determine permitting the new tobacco product to be marketed would be appropriate for the protection of public health. The description must include actions to market the product that would be taken by the applicant, on behalf of the applicant, or at the applicant's direction, and also discuss any restrictions on the sales and distribution the applicant proposes to be included in a marketing order under section 910(c)(1)(B) of the Federal Food Drug and Cosmetic Act. The description of marketing plans must contain, at minimum:
(i) A description of the specific group(s) to which the labeling, advertising, marketing, promotion, and other consumer-directed activities for the new tobacco product would be targeted ( i.e., the intended audience(s));
(ii) A discussion of how the labeling, advertising, marketing, promotion, and other consumer-directed activities for the new tobacco product would be targeted to reach the intended audience(s) identified in paragraph (i) and what other group(s) would foreseeably be exposed to those materials and activities as a result;
(iii) A discussion of, for individuals below the minimum age of sale, how access to the new tobacco product would be restricted and exposure to the labeling, advertising, marketing, promotion, and other consumer-directed activities would be limited; and
(iv) A concluding summary describing how the applicant's plans for marketing the new tobacco product are consistent with the applicant's discussion of the increased or decreased likelihood of changes in tobacco product use behavior, including switching, initiation, cessation, and polyuse, under § 1114.7(l) and permits FDA to determine permitting the new tobacco product to be marketed would be appropriate for the protection of public health.
(g) Statement of compliance with 21 CFR part 25. (1) The application must contain an environmental assessment prepared in accordance with § 25.40 of this chapter, or a valid claim of categorical exclusion, if applicable. If the applicant believes that the action qualifies for an available categorical exclusion, the applicant must state under § 25.15(a) and (d) of this chapter that the action requested qualifies for a categorical exclusion, citing the particular exclusion that is claimed, and that to the applicant's knowledge, no extraordinary circumstances exist under § 25.21 of this chapter.
(h) Summary. The application must include a summary of all information contained in the application. The summary must include the following items, highlighting the effects on youth, young adults, and other relevant vulnerable populations:
(1) A summary of the product formulation section of the application;
(2) A summary of the manufacturing section of the application;
(3) A summary of the health risk investigations section of the application, including all information regarding the following items, and identify areas in which there is a lack of information, where applicable:
(i) The health risks of the tobacco product to both users and nonusers of the product and whether the tobacco product may present less health risk than other tobacco products;
(ii) The impact the product and its marketing will have on the likelihood of changes in tobacco use behavior, including cessation, switching, and polyuse, of tobacco product users;
(iii) The impact the product and its marketing will have on the likelihood of tobacco use initiation by tobacco product nonusers;
(iv) How users and nonusers perceive the risk of the tobacco product based upon its label, labeling, and advertising, to the extent that advertising has been studied;
(v) Whether users are able to understand the labeling and instructions for use, and use the product in accordance with those instructions; and
(vi) The impact of human factors on the health risks to product users and nonusers (as described in paragraph (k)(1)(v) of this section);
(4) A concluding discussion describing how the data and information contained in the PMTA both constitute valid scientific evidence and establish that permitting marketing of the new tobacco product is appropriate for the protection of the public health, as determined with respect to the risks and benefits to the population as a whole, including users and nonusers of the tobacco product. This discussion must specifically describe the effects on youth, young adults, and other relevant vulnerable populations with an emphasis on populations that are most likely to use the new tobacco product. The summary must also identify any key or pivotal studies on which an applicant is relying to establish that permitting the marketing of the new tobacco product would be APPH.
(i) Product formulation. The application must contain a full statement of the components or parts, materials, ingredients, additives, constituents, properties, and the principle or principles of operation, of the tobacco product, including the following information:
(1) Components or parts, materials, ingredients, additives, and constituents. The applicant must provide a full statement of:
(i) Components or parts. The quantity, function, and purpose of, and, where applicable, target specification(s) of, each component or part in the product. Where the tobacco product contains software components, the applicant must provide:
(A) A description of the software or technology ( e.g., Bluetooth);
(B) The purpose of the software or technology, such as monitoring where tobacco products are located, activated, or used;
(C) A description of the data collected by the software and how it will be used.
(ii) Materials. For each material in the product, include:
(A) The material name and common name(s), if applicable;
(B) The component or part of the tobacco product where the material is located;
(C) The subcomponent or subpart where the material is located, if applicable;
(D) The function of the material;
(E) The quantities (including ranges or means and acceptance limits) of the material(s) in the new tobacco product (with any specification variation, if applicable);
(F) The specification(s) (including quality/grades and suppliers) used for the new tobacco product (including any specification variations, if applicable); and
(G) Any other material properties to fully characterize the new tobacco product.
(iii) Ingredients other than tobacco. For ingredients other than tobacco in each component or part of the product, include:
(A) The International Union of Pure and Applied Chemistry (IUPAC) chemical name and common name, if applicable;
(B) The Chemical Abstracts Service (CAS) number or FDA Unique Ingredient Identifier (UNII), if applicable;
(C) The function of the ingredient;
(D) The quantity of the ingredient in the tobacco product, with the unit of measure (including ranges or means and acceptance limits) reported as mass per gram of tobacco for nonportioned tobacco products and as mass per portion for portioned tobacco products (with any specification variation, if applicable);
(E) The specification(s) (including purity or grade and supplier); and
(F) For complex purchased ingredients, each single chemical substance reported separately.
(iv) Tobacco ingredients. For tobacco ingredients in each component or part, include the following information or, if applicable, a statement that the product does not contain tobacco ingredients:
(A) The type(s) ( e.g., Bright, Burley, reconstituted);
(B) The quantity with the unit of measure (including ranges or means, acceptance limits) of each tobacco ingredient in the tobacco product reported as mass per gram of tobacco for nonportioned tobacco products and as mass per portion for portioned tobacco products (with any specification variation, if applicable);
(C) The specification of tobacco used for the new tobacco product (with any specification variation, if applicable); and
(D) A description of any genetic engineering of the tobacco that impacts product characteristics.
(v) Constituents. Constituents, including HPHCs and other constituents, contained within, or emitted from (including its smoke or aerosol), the product, including any reaction product from leaching or aging, by providing:
(A) The constituent names in alphabetical order;
(B) The common name(s);
(C) The Chemical Abstract Services number;
(D) The mean quantity and variance with unit of measure;
(E) The number of samples and measurement replicates for each sample;
(F) A description of method procedure, method validation information and rationale for selecting each test method;
(G) The name and location of the testing laboratory or laboratories and documentation showing that the laboratory or laboratories is (or are) accredited by a nationally or internationally recognized external accreditation organization;
(H) Length of time between dates of manufacture and date(s) of testing;
(I) Storage conditions of the tobacco product before it was tested;
(J) Test data including test protocols, any deviation(s) from the test protocols, quantitative acceptance (pass/fail) criteria, and line data for all testing performed. Test data for combusted or inhaled products must reflect testing conducted using both intense and nonintense smoking or aerosol-generating regimens, where established; and
(K) Complete descriptions of any smoking or aerosol-generating regimens used for analytical testing that are not standardized or widely accepted by the scientific community, if applicable.
(vi) Container closure system. A description of the container closure system, including:
(A) Information describing how the container closure system protects and preserves the product from damage during transport, environmental contaminants, and potential leaching and migration of packaging constituents into the new tobacco product; and
(B) Information describing design features developed to prevent the risk of accidental exposure, if any.
(vii) Statement of tobacco blending, reconstitution, or manipulation. Information regarding tobacco blending, reconstitution, or manipulation, where applicable.
(2) Other properties. The applicant must provide a full description of the additional properties of the tobacco product that includes:
(i) Product dimensions and construction. The product dimensions and the overall construction of the product using a diagram or schematic drawing that clearly depicts the finished tobacco product and its components with dimensions, operating parameters, and materials.
(ii) Design parameters and test data. (A) All final design parameters of the product, specifying nominal values or the explicit range of values as well as the design tolerance (where appropriate), including, but not limited to, the parameters specified in tables 1 to 22 of this paragraph as applicable. If a design parameter specified in tables 1 to 22 does not apply to the tobacco product, applicants must explain why the required design parameter does not apply or how an alternative design parameter would satisfy the required design parameter. If the product has additional design parameters that are not specified in tables 1 to 22, the application must contain a description of the design specifications as well as test data and processes to demonstrate that the design parameters and their associated processes are adequately controlled; and
(B) A quantitative description of the performance criteria, including test protocols, line data, and a summary of the results, for each applicable intermediate and final design parameter and manufacturing step, that includes, but is not limited to the test data specified in tables 1 to 22 of this paragraph for the product category as applicable. If the test data specified in the applicable table does not apply to the tobacco product, applicants must explain why the test data does not apply or how alternative test data would satisfy this requirement. Where tobacco cut size or particle size is a required design parameter for a product category or subcategory and the target specifications and range limits are not available, the following alternative information may be submitted in place of this information: a description of the tobacco cutting process (including a complete description of the milling, cutting, and sifting process; the control parameters of the miller or cutter; and any sift specifications), or the measured particle size distribution;
Table 2 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for Cigarettes
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
• Cigarette length (mm).
• Tobacco filler mass (mg).
• Cigarette circumference or diameter (mm).
• Tobacco rod density (g/cm 3 ).
• Tobacco filler mass (mg).
• Tobacco cut size (mm or CPI).
• Tobacco rod density (g/cm 3 ).
• Tobacco moisture or oven volatiles (%).
• Tobacco cut size (mm or CPI).
• Cigarette paper base paper porosity (permeability) (CU).
• Tobacco moisture or oven volatiles (%).
• Cigarette paper band porosity or permeability (CU) or Cigarette paper band diffusivity (cm 2 /s).
• Cigarette paper length (mm).
• Filter pressure drop (mm H 2 O).
• Cigarette paper base paper porosity (permeability) (CU).
• Cigarette paper band porosity (permeability) (CU) [alternatively, band diffusivity (cm 2 /s)] (if applicable).
• Filter efficiency (%) (If no filter efficiency data is available for the products, include information sufficient to show that the cigarette filter is unchanged (e.g., denier per filament, total denier, and filter density)).
• Cigarette paper band width (mm).
• Filter ventilation (%).
• Cigarette paper band space (mm).
• Filter length (mm).
• Filter pressure drop (mm H 2 O).
• Filter efficiency (%) (If no filter efficiency data is available for the products, include information sufficient to show that the cigarette filter is unchanged (e.g., denier per filament, total denier, and filter density)).
• Tipping paper length (mm).
• Filter ventilation (%).
Table 3 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for Portioned and Nonportioned Smokeless Tobacco Products
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
Portioned Smokeless Tobacco Products
• Tobacco cut size (mm or CPI) or tobacco particle size (mm or micron).
• Tobacco cut size (mm or CPI) or tobacco particle size (mm or micron).
• Tobacco moisture (%).
• Tobacco moisture (%).
• Portion length (mm).
• Portion mass (mg).
• Portion width (mm).
• Pouch material basis weight (g/m 2 ) (if applicable).
• Portion mass (mg).
• Pouch material porosity (CU) (permeability) (L/m 2 /s).
• Portion material thickness (mm) (if applicable).
• Nicotine dissolution rate (%/min).
• Pouch material basis weight (g/m 2 ) (if applicable).
• Pouch material porosity (permeability) (CU or L/m 2 /s) (if applicable).
• Nicotine dissolution rate (%/min).
Nonportioned Smokeless Tobacco Products
• Tobacco cut size (mm or CPI) or tobacco particle size (mm or micron)
• Tobacco cut size (mm or CPI) or tobacco particle size (mm or micron).
• Tobacco moisture (%)
• Tobacco moisture (%).
Table 4 to Paragraph (i)(2)(ii)—Required Design Parameter Information for RYO Tobacco Rolling Papers
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
• Roll-your-own (RYO) paper length (mm).
• RYO mass per paper (mg).
• RYO paper width (mm).
• RYO paper base paper basis weight (g/m 2 ).
• RYO mass per paper (mg).
• RYO paper base paper porosity (permeability) (CU).
• RYO paper base paper basis weight (g/m 2 ).
• RYO paper band porosity (permeability) (CU) or [alternatively, RYO paper band diffusivity (cm 2 /s)] (if applicable).
• RYO paper base paper porosity (permeability) (CU).
• RYO paper band porosity (permeability) (CU) or [alternatively, RYO paper band diffusivity (cm 2 /s)] (if applicable).
• RYO paper band width (mm) (if applicable).
• RYO paper band space (mm) (if applicable).
Table 5 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for RYO Tobacco Tubes
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
• Tube mass (mg).
• Tube mass (mg).
• Tube length (mm).
• Tube paper base paper basis weight (g/m 2 ).
• Tube circumference or diameter (mm).
• Tube paper base paper porosity (permeability) (CU).
• Tube paper width (mm).
• Tube paper band porosity (permeability) (CU) (if applicable) or Tube paper band diffusivity (cm 2 /s) (if applicable).
• Tube paper base paper basis weight (g/m 2 ).
• Tube paper base paper porosity (permeability) (CU).
• Tube paper band porosity (permeability) (CU) (if applicable) or Tube paper band diffusivity (cm 2 /s) (if applicable).
• Tube paper band width (mm) (if applicable).
• Tube paper band space (mm) (if applicable).
Table 6 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for RYO Tobacco Filtered Tubes
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
• Tube mass (mg).
• Tube paper base paper basis weight (g/m 2 ).
• Tube length (mm).
• Tube paper base paper porosity (permeability) (CU).
• Tube circumference or diameter (mm).
• Tube mass (mg).
• Tube paper length (mm).
• Tube paper band porosity (permeability) (CU) (if applicable) or Tube paper band diffusivity (cm 2 /s) (if applicable).
• Nonfilter tube length (mm).
• Filter pressure drop (mm H 2 O).
• Tube paper width (mm).
• Filter efficiency (%) (If no filter efficiency data is available for the products, include information sufficient to show that the cigarette filter is unchanged (e.g., denier per filament (DPF), total denier (g/9000m), and filter density (g/cm 3 ))).
• Tube paper base paper basis weight (g/m 2 ).
• Filter ventilation (%).
• Tube paper base paper porosity (permeability) (CU).
• Tube paper band porosity (permeability) (CU) (if applicable) or Tube paper band diffusivity (cm 2 /s) (if applicable).
• Tube paper band width (mm) (if applicable).
• Tube paper band space (mm) (if applicable).
• Filter length (mm).
• Filter pressure drop (mm H 2 O).
• Filter efficiency (%) (If no filter efficiency data is available for the products, include information sufficient to show that the cigarette filter is unchanged (e.g., denier per filament (DPF), total denier (g/9000m), and filter density (g/cm 3 ))).
• Tipping paper length (mm).
• Filter ventilation (%).
Table 7 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for RYO Tobacco
Provide target specification with upper and lower range limits for:
Provide test data (include test protocols, quantitative acceptance criteria, data sets, and a summary of the results) for:
• Tobacco cut size (mm or CPI).
• Tobacco cut size (mm or CPI).
• Tobacco moisture or oven volatiles (%).
• Tobacco moisture or oven volatiles (%).
Table 8 to Paragraph ( i )(2)( ii )—Required Design Parameter Information for RYO Tobacco Paper Tips
Provide…
