LEGALDIGMLEGALDIGM
    ← Code of Federal Regulations
    Beta
    17 CFR § 229.1125

    17 CFR § 229.1125 — § 229.1125 (Item 1125) Schedule AL—Asset-level information.

    Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.

    Analyze this law with AI
    § 229.1125 (Item 1125) Schedule AL—Asset-level information. (a) The following definitions apply to the terms used in this schedule unless otherwise specified: Debt service reduction. A modification of the terms of a loan resulting from a bankruptcy proceeding, such as a reduction of the amount of the monthly payment on the related mortgage loan. Deficient valuation. A bankruptcy proceeding whereby the bankruptcy court may establish the value of the mortgaged property at an amount less than the then-outstanding principal balance of the mortgage loan secured by the mortgaged property or may reduce the outstanding principal balance of a mortgage loan. Underwritten. The amount of revenues or expenses adjusted based on a number of assumptions made by the mortgage originator or seller. (b) As required by Item 1111(h) (§ 229.1111(h)), provide asset-level information for each asset or security in the pool in the manner specified in appendix to § 229.1125. Appendix to § 229.1125—Schedule AL Item 1. Residential mortgages. If the asset pool includes residential mortgages, provide the following data and the data under Item 1 for each loan in the asset pool: (a) Asset numbers. (1) Asset number type. Identify the source of the asset number used to specifically identify each asset in the pool. (2) Asset number. Provide the unique ID number of the asset. Instruction to paragraph (a)(2): The asset number must reference a single asset within the pool and should be the same number that will be used to identify the asset for all reports that would be required of an issuer under Sections 13 or 15(d) of the Exchange Act (15 U.S.C. 78m or 78o(d)). If an asset is removed and replaced with another asset, the asset added to the pool should be assigned a unique asset number applicable to only that asset. (3) Asset group number. For structures with multiple collateral groups, indicate the collateral group number in which the asset falls. (b) Reporting period. (1) Reporting period begin date. Specify the beginning date of the reporting period. (2) Reporting period end date. Specify the ending date of the reporting period. (c) General information about the residential mortgage. (1) Original loan purpose. Specify the code which describes the purpose of the loan at the time the loan was originated. (2) Originator. Identify the name of the entity that originated the loan. (3) Original loan amount. Indicate the amount of the loan at the time the loan was originated. (4) Original loan maturity date. Indicate the month and year in which the final payment on the loan is scheduled to be made at the time the loan was originated. (5) Original amortization term. Indicate the number of months that would have been required to retire the mortgage loan through regular payments, as determined at the origination date of the loan. In the case of an interest-only loan, the original amortization term is the original term to maturity (other than in the case of a balloon loan). In the case of a balloon loan, the original amortization term is the number of months used to calculate the principal and interest payment due each month (other than the balloon payment). (6) Original interest rate. Provide the rate of interest at the time the loan was originated. (7) Accrual type. Provide the code that describes the method used to calculate interest on the loan. (8) Original interest rate type. Indicate whether the interest rate on the loan is fixed, adjustable, step or other. (9) Original interest only term. Indicate the number of months in which the obligor is permitted to pay only interest on the loan beginning from when the loan was originated. (10) Underwriting indicator. Indicate whether the loan or asset met the criteria for the first level of solicitation, credit-granting or underwriting criteria used to originate the pool asset. (11) Original lien position. Indicate the code that describes the priority of the lien against the subject property at the time the loan was originated. (12) Information related to junior liens. If the loan is a first mortgage with subordinate liens, provide the following additional information for each non-first mortgage if obtained or available: (i) Most recent junior loan balance. Provide the most recent combined balance of any subordinate liens. (ii) Date of most recent junior loan balance. Provide the date of the most recent junior loan balance. (13) Information related to non-first mortgages. For non-first mortgages, provide the following information if obtained or available: (i) Most recent senior loan amount. Provide the total amount of the balances of all associated senior loans. (ii) Date of most recent senior loan amount. Provide the date(s) of the most recent senior loan amount. (iii) Loan type of most senior lien. Indicate the code that describes the loan type of the first mortgage. (iv) Hybrid period of most senior lien. For non-first mortgages where the associated first mortgage is a hybrid ARM, provide the number of months remaining in the initial fixed interest rate period for the first mortgage. (v) Negative amortization limit of most senior lien. For non-first mortgages where the associated first mortgage features negative amortization, indicate the negative amortization limit of the mortgage as a percentage of the original unpaid principal balance. (vi) Origination date of most senior lien. Provide the origination date of the associated first mortgage. (14) Prepayment penalty indicator. Indicate yes or no as to whether the loan includes a penalty charged to the obligor in the event of a prepayment. (15) Negative amortization indicator. Indicate yes or no as to whether the loan allows negative amortization. (16) Modification indicator. Indicate yes or no as to whether the loan has been modified from its original terms. (17) Number of modifications. Provide the number of times that the loan has been modified. (18) Mortgage insurance requirement indicator. Indicate yes or no as to whether mortgage insurance is or was required as a condition for originating the loan. (19) Balloon indicator. Indicate yes or no as to whether the loan documents require a lump-sum to fully pay off the loan. (20) Covered/High cost loan indicator. Indicate yes, no or unknown as to whether as of the end of the reporting period the loan is categorized as “high cost,” “higher priced” or “covered” according to applicable federal, state or local statutes, ordinances or regulations. (21) Servicer-placed hazard insurance. Indicate yes, no or unknown as to whether as of the end of the reporting period the hazard insurance on the property is servicer-placed. (22) Refinance cash-out amount. For any refinance loan that is a cash-out refinance provide the amount the obligor received after all other loans to be paid by the mortgage proceeds have been satisfied. For any refinance loan that is a no-cash-out refinance provide the result of the following calculation: [NEW LOAN AMOUNT]−[PAID OFF FIRST MORTGAGE LOAN AMOUNT]−[PAID OFF SECOND MORTGAGE LOAN AMOUNT]−[CLOSING COSTS]. (23) Total origination and discount points. Provide the amount paid to the lender to increase the lender's effective yield and, in the case of discount points, to reduce the interest rate paid by the obligor. (24) Broker. Indicate yes or no as to whether a broker originated or was involved in the origination of the loan. (25) Channel. Specify the code that describes the source from which the issuer obtained the loan. (26) NMLS company number. Specify the National Mortgage License System (NMLS) registration number of the company that originated the loan. (27) Buy down period. Indicate the total number of months during which any buy down is in effect, representing the accumulation of all buy down periods. (28) Loan delinquency advance days count. Indicate the number of days after which a servicer can stop advancing funds on a delinquent loan. (29) Information related to ARMs. If the loan is an ARM, provide the following additional information: (i) Original ARM Index. Specify the code that describes the type and source of index to be used to determine the interest rate at each adjustment. (ii) ARM Margin. Indicate the number of percentage points that is added to the index value to establish the new interest rate at each interest rate adjustment date. (iii) Fully indexed interest rate. Indicate the fully indexed interest rate to which the obligor was underwritten. (iv) Initial fixed rate period for hybrid ARM. If the interest rate is initially fixed for a period of time, indicate the number of months between the first payment date of the loan and the first interest rate adjustment date. (v) Initial interest rate decrease. Indicate the maximum percentage by which the interest rate may decrease at the first interest rate adjustment date. (vi) Initial interest rate increase. Indicate the maximum percentage by which the interest rate may increase at the first interest rate adjustment date. (vii) Index look-back. Provide the number of days prior to an interest rate effective date used to determine the appropriate index rate. (viii) Subsequent interest rate reset period. Indicate the number of months between subsequent rate adjustments. (ix) Lifetime rate ceiling. Indicate the percentage of the maximum interest rate that can be in effect during the life of the loan. (x) Lifetime rate floor. Indicate the percentage of the minimum interest rate that can be in effect during the life of the loan. (xi) Subsequent interest rate decrease. Provide the maximum number of percentage points by which the interest rate may decrease at each rate adjustment date after the initial adjustment. (xii) Subsequent interest rate increase. Provide the maximum number of percentage points by which the interest rate may increase at each rate adjustment date after the initial adjustment. (xiii) Subsequent payment reset period. Indicate the number of months between payment adjustments after the first interest rate adjustment date. (xiv) ARM round indicator. Indicate the code that describes whether an adjusted interest rate is rounded to the next higher adjustable rate mortgage round factor, to the next lower round factor, or to the nearest round factor. (xv) ARM round percentage. Indicate the percentage to which an adjusted interest rate is to be rounded. (xvi) Option ARM indicator. Indicate yes or no as to whether the loan is an option ARM. (xvii) Payment method after recast. Specify the code that describes the means of computing the lowest monthly payment available to the obligor after recast. (xviii) Initial minimum payment. Provide the amount of the initial minimum payment the obligor is permitted to make. (xix) Convertible indicator. Indicate yes or no as to whether the obligor of the loan has an option to convert an adjustable interest rate to a fixed interest rate during a specified conversion window. (xx) HELOC indicator. Indicate yes or no as to whether the loan is a home equity line of credit (HELOC). (xxi) HELOC draw period. Indicate the original maximum number of months from the month the loan was originated during which the obligor may draw funds against the HELOC account. (30) Information related to prepayment penalties. If the obligor is subject to prepayment penalties, provide the following additional information: (i) Prepayment penalty calculation. Specify the code that describes the method for calculating the prepayment penalty for the loan. (ii) Prepayment penalty type. Specify the code that describes the type of prepayment penalty. (iii) Prepayment penalty total term. Provide the total number of months after the origination of the loan that the prepayment penalty may be in effect. (iv) Prepayment penalty hard term. For hybrid prepayment penalties, provide the number of months after the origination of the loan during which a “hard” prepayment penalty applies. (31) Information related to negative amortization. If the loan allows for negative amortization, provide the following additional information: (i) Negative amortization limit. Specify the maximum amount of negative amortization that is allowed before recalculating a fully amortizing payment based on the new loan balance. (ii) Initial negative amortization recast period. Indicate the number of months after the origination of the loan that negative amortization is allowed. (iii) Subsequent negative amortization recast period. Indicate the number of months after which the payment is required to recast after the first amortization recast period. (iv) Negative amortization balance amount. Provide the amount of the negative amortization balance accumulated as of the end of the reporting period. (v) Initial fixed payment period. Indicate the number of months after the origination of the loan during which the payment is fixed. (vi) Initial periodic payment cap. Indicate the maximum percentage by which a payment can increase in the first amortization recast period. (vii) Subsequent periodic payment cap. Indicate the maximum percentage by which a payment can increase in one amortization recast period after the initial cap. (viii) Initial minimum payment reset period. Provide the maximum number of months after the origination of the loan that an obligor can initially pay the minimum payment before a new minimum payment is determined. (ix) Subsequent minimum payment reset period. Provide the maximum number of months after the initial period an obligor can pay the minimum payment before a new minimum payment is determined. (x) Minimum payment. Provide the amount of the minimum payment due during the reporting period. (d) Information related to the property. (1) Geographic location. Specify the location of the property by providing the two-digit zip code. (2) Occupancy status. Specify the code that describes the property occupancy status at the time the loan was originated. (3) Most recent occupancy status. If a property inspection has been performed after the loan is originated, provide the code that describes the manner in which the property is occupied. (4) Property type. Specify the code that describes the type of property that secures the loan. (5) Most recent property value. If an additional property valuation was obtained by any transaction party or its affiliates after the original appraised property value, provide the most recent property value obtained. (6) Most recent property valuation type. Specify the code that describes the method by which the most recent property value was reported. (7) Most recent property valuation date. Specify the date on which the most recent property value was reported. (8) Most recent AVM model name. Provide the code indicating the name of the AVM model if an AVM was used to determine the most recent property value. (9) Most recent AVM confidence score. If an additional AVM was obtained by any transaction party or its affiliates after the original valuation, provide the confidence score presented on the most recent AVM report. (10) Original combined loan-to-value. Provide the ratio obtained by dividing the amount of all known outstanding mortgage liens on a property at origination by the lesser of the original appraised property value or the sales price. (11) Original loan-to-value. Provide the ratio obtained by dividing the amount of the original mortgage loan at origination by the lesser of the original appraised property value or the sales price. (e) Information related to the obligor. (1) Original number of obligors. Indicate the number of obligors who are obligated to repay the mortgage note at the time the loan was originated. (2) Original obligor credit score. Provide the standardized credit score of the obligor used to evaluate the obligor during the loan origination process. (3) Original obligor credit score type. Specify the type of the standardized credit score used to evaluate the obligor during the loan origination process. (4) Most recent obligor credit score. If an additional credit score was obtained by any transaction party or its affiliates after the original credit score, provide the most recently obtained standardized credit score of the obligor. (5) Most recent obligor credit score type. Specify the type of the most recently obtained standardized credit score of the obligor. (6) Date of most recent obligor credit score. Provide the date of the most recently obtained standardized credit score of the obligor. (7) Obligor income verification level. Indicate the code describing the extent to which the obligor's income was verified during the loan origination process. (8) 4506—T Indicator. Indicate yes or no whether a Transcript of Tax Return (received pursuant to the filing of IRS Form 4506-T) was obtained and considered. (9) Originator front-end debt-to-income (DTI). Provide the front-end DTI ratio used by the originator to qualify the loan. (10) Originator back-end DTI. Provide the back-end DTI ratio used by the originator to qualify the loan. (11) Obligor employment verification. Indicate the code describing the extent to which the obligor's employment was verified during the loan origination process. (12) Length of employment—obligor. Indicate whether the obligor was employed by its current employer for greater than 24 months at the time the loan was originated. (13) Obligor asset verification. Indicate the code describing the extent to which the obligor's assets used to qualify the loan was verified during the loan origination process. (14) Original pledged assets. If the obligor(s) pledged financial assets to the lender instead of making a down payment, provide the total value of assets pledged as collateral for the loan at the time of origination. (15) Qualification method. Specify the code that describes the type of mortgage payment used to qualify the obligor for the loan. (f) Information related to mortgage insurance. If mortgage insurance is required on the mortgage, provide the following additional information: (1) Mortgage insurance company name. Provide the name of the entity providing mortgage insurance for the loan. (2) Mortgage insurance coverage. Indicate the total percentage of the original loan balance that is covered by mortgage insurance. (3) Pool insurance company. Provide the name of the pool insurance provider. (4) Pool insurance stop loss percent. Provide the aggregate amount that the pool insurance company will pay, calculated as a percentage of the pool balance. (5) Mortgage insurance coverage plan type. Specify the code that describes the coverage category of the mortgage insurance applicable to the loan. (g) Information related to activity on the loan. (1) Asset added indicator. Indicate yes or no whether the asset was added to the pool during the reporting period. Instruction to paragraph (g)(1): A response to this data point is required only when assets are added to the asset pool after the final prospectus under § 230.424 of this chapter is filed. (2) Remaining term to maturity. Indicate the number of months from the end of the reporting period to the loan maturity date. (3) Modification indicator—reporting period. Indicate yes or no whether the asset was modified during the reporting period. (4) Next payment due date. For loans that have not been paid off, indicate the next payment due date. (5) Advancing method. Specify the code that indicates a servicer's responsibility for advancing principal or interest on delinquent loans. (6) Servicing advance methodology. Indicate the code that describes the manner in which principal and/or interest are advanced by the servicer. (7) Stop principal and interest advance date. Provide the first payment due date for which the servicer ceased advancing principal or interest. (8) Reporting period beginning loan balance. Indicate the outstanding principal balance of the loan as of the beginning of the reporting period. (9) Reporting period beginning scheduled loan balance. Indicate the scheduled principal balance of the loan as of the beginning of the reporting period. (10) Next reporting period payment amount due. Indicate the total payment due to be collected in the next reporting period. (11) Reporting period interest rate. Indicate the interest rate in effect during the reporting period. (12) Next interest rate. For loans that have not been paid off, indicate the interest rate that is in effect for the next reporting period. (13) Servicing fee—percentage. If the servicing fee is based on a percentage, provide the percentage used to calculate the aggregate servicing fee. (14) Servicing fee—flat-fee. If the servicing fee is based on a flat-fee amount, indicate the monthly servicing fee paid to all servicers. (15) Other assessed but uncollected servicer fees. Provide the cumulative amount of late charges and other fees that have been assessed by the servicer, but not paid by the obligor. (16) Other loan-level servicing fee(s) retained by the servicer. Provide the amount of all other fees earned by loan administrators during the reporting period that reduced the amount of funds remitted to the issuing entity (including subservicing, master servicing, trustee fees, etc.). (17) Scheduled interest amount. Indicate the interest payment amount that was scheduled to be collected during the reporting period. (18) Other interest adjustments. Indicate any unscheduled interest adjustments during the reporting period. (19) Scheduled principal amount. Indicate the principal payment amount that was scheduled to be collected during the reporting period. (20) Other principal adjustments. Indicate any other amounts that caused the principal balance of the loan to be decreased or increased during the reporting period. (21) Reporting period ending actual balance. Indicate the actual balance of the loan as of the end of the reporting period. (22) Reporting period ending scheduled balance. Indicate the scheduled principal balance of the loan as of the end of the reporting period. (23) Reporting period scheduled payment amount. Indicate the total payment amount that was scheduled to be collected during the reporting period (including all fees and escrows). (24) Total actual amount paid. Indicate the total payment (including all escrows) paid to the servicer during the reporting period. (25) Actual interest collected. Indicate the gross amount of interest collected during the reporting period, whether or not from the obligor. (26) Actual principal collected. Indicate the amount of principal collected during the reporting period, whether or not from the obligor. (27) Actual other amounts collected. Indicate the total of any amounts, other than principal and interest, collected during the reporting period, whether or not from the obligor. (28) Paid through date. Provide the date the loan's scheduled principal and interest is paid through as of the end of the reporting period. (29) Interest paid through date. Provide the date through which interest is paid with the payment received during the reporting period, which is the effective date from which interest will be calculated for the application of the next payment. (30) Paid-in-full amount. Provide the scheduled loan “paid-in-full” amount (principal) (do not include the current month's scheduled principal). Applies to all liquidations and loan payoffs. (31) Information related to servicer advances. (i) Servicer advanced amount—principal. Provide the total amount the servicer advanced for the reporting period for due but unpaid principal on the loan. (ii) Servicer advanced amounts repaid—principal. Provide the total amount of any payments made by the obligor during the reporting period that was applied to outstanding advances of due but unpaid principal on the loan. (iii) Servicer advances cumulative—principal. Provide the outstanding cumulative amount of principal advances made by the servicer as of the end of the reporting period, including amounts advanced for the reporting period. (iv) Servicer advanced amount—interest. Provide the total amount the servicer advanced for the reporting period for due but unpaid interest on the loan. (v) Servicer advanced amounts repaid—interest. Provide the total amount of any payments made by the obligor during the reporting period that was applied to outstanding advances of due but unpaid interest on the loan. (vi) Servicer advances cumulative—interest. Provide the outstanding cumulative amount of interest advances made by the servicer as of the end of the reporting period, including amounts advanced for the reporting period. (vii) Servicer advanced amount—taxes and insurance. Provide the total amount the servicer advanced for the reporting period for due but unpaid property tax and insurance payments (escrow amounts). (viii) Servicer advanced amount repaid—taxes and insurance. Provide the total amount of any payment made by the obligor during the reporting period that was applied to outstanding advances of due but unpaid escrow amounts. (ix) Servicer advances cumulative—taxes and insurance. Provide the outstanding cumulative amount of escrow advances made by the servicer as of the end of the reporting period, including amounts advanced for the reporting period. (x) Servicer advanced amount—corporate. Provide the total amount the servicer advanced for property inspection and preservation expenses for the reporting period. (xi) Servicer advanced amount repaid—corporate. Provide the total amount of any payments made by the obligor during the reporting period that was applied to outstanding corporate advances. (xii) Servicer advances cumulative—corporate. Provide the outstanding cumulative amount of corporate advances made by the servicer as of the end of the reporting period, including amounts advanced for the reporting period. Instruction to paragraph (g)(31): For loans modified or liquidated during a reporting period the data provided in response to this paragraph (g)(31) is to be information as of the liquidation date or modification date, as applicable. (32) Zero balance loans. If the loan balance was reduced to zero during the reporting period, provide the following additional information about the loan. (i) Zero balance effective date. Provide the date on which the loan balance was reduced to zero. (ii) Zero balance code. Provide the code that indicates the reason the loan's balance was reduced to zero. (33) Most recent 12-month pay history. Provide the string that indicates the payment status per month listed from oldest to most recent. (34) Number of payments past due. Indicate the number of payments the obligor is past due as of the end of the reporting period. (35) Information related to activity on ARM loans. If the loan is an ARM, provide the following additional information. (i) Rate at next reset. Provide the interest rate that will be used to determine the next scheduled interest payment, if known. (ii) Next payment change date. Provide the next date that the amount of scheduled principal and/or interest is scheduled to change. (iii) Next interest rate change date. Provide the next scheduled date on which the interest rate is scheduled to change. (iv) Payment at next reset. Provide the principal and interest payment due after the next scheduled interest rate change, if known. (v) Exercised ARM conversion option indicator. Indicate yes or no whether the obligor exercised an option to convert an ARM loan to a fixed interest rate loan during the reporting period. (h) Information related to servicers. (1) Primary servicer. Indicate the name of the entity that serviced the loan during the reporting period. (2) Most recent servicing transfer received date. If a loan's servicing has been transferred, provide the effective date of the most recent servicing transfer. (3) Master servicer. Provide the name of the entity that served as master servicer during the reporting period, if applicable. (4) Special servicer. Provide the name of the entity that served as special servicer during the reporting period, if applicable. (5) Subservicer. Provide the name of the entity that served as a subservicer during the reporting period, if applicable. (i) Asset subject to demand. Indicate yes or no whether during the reporting period the loan was the subject of a demand to repurchase or replace for breach of representations and warranties, including investor demands upon a trustee. If the loan is the subject of a demand to repurchase or replace for breach of representations and warranties, including investor demands upon a trustee, provide the following additional information: (1) Status of asset subject to demand. Indicate the code that describes the status of the repurchase or replacement demand as of the end of the reporting period. (2) Repurchase amount. Provide the amount paid to repurchase the loan from the pool. (3) Demand resolution date. Indicate the date the loan repurchase or replacement demand was resolved. (4) Repurchaser. Specify the name of the repurchaser. (5) Repurchase or replacement reason. Indicate the code that describes the reason for the repurchase or replacement. (j) Information related to loans that have been charged off. If the loan has been charged off, provide the following additional information: (1) Charged-off principal amount. Specify the total amount of uncollected principal charged off. (2) Charged-off interest amount. Specify the total amount of uncollected interest charged off. (k) [Reserved] (l) Loss mitigation type indicator. Indicate the code that describes the type of loss mitigation the servicer is pursuing with the obligor, loan, or property as of the end of the reporting period. (m) Information related to loan modifications. If the loan has been modified from its original terms, provide the following additional information about the most recent loan modification: (1) Most recent loan modification event type. Specify the code that describes the most recent action that has resulted in a change or changes to the loan note terms. (2) Effective date of the most recent loan modification. Provide the date on which the most recent modification of the loan has gone into effect. (3) Post-modification maturity date. Provide the loan's maturity date as of the modification effective payment date. (4) Post-modification interest rate type. Indicate whether the interest rate type on the loan after the modification is fixed, adjustable, step, or other. (5) Post-modification amortization type. Indicate the amortization type after modification. (6) Post-modification interest rate. Provide the interest rate in effect as of the modification effective payment date. (7) Post-modification first payment date. Indicate the date of the first payment due after the loan modification. (8) Post-modification loan balance. Provide the loan balance as of the modification effective payment date as reported on the modification documents. (9) Post-modification principal and interest payment. Provide total principal and interest payment amount as of the modification effective payment date. (10) Total capitalized amount. Provide the amount added to the principal balance of the loan due to the modification. (11) Income verification indicator (at modification). Indicate yes or no whether a Transcript of Tax Return (received pursuant to the filing of IRS Form 4506-T) was obtained and considered during the loan modification process. (12) Modification front-end DTI. Provide the front-end DTI ratio used to qualify the modification. (13) Modification back-end DTI. Provide the back-end DTI ratio used to qualify the modification. (14) Total deferred amount. Provide the deferred amount that is non-interest bearing. (15) Forgiven principal amount (cumulative). Provide the total amount of all principal balance reductions as a result of loan modifications over the life of the loan. (16) Forgiven principal amount (reporting period). Provide the total principal balance reduction as a result of a loan modification during the reporting period. (17) Forgiven interest amount (cumulative). Provide the total amount of all interest forgiven as a result of loan modifications over the life of the loan. (18) Forgiven interest amount (reporting period). Provide the total gross interest forgiven as a result of a loan modification during the reporting period. (19) Actual ending balance—total debt owed. For a loan with principal forbearance, provide the sum of the actual ending balance field plus the principal deferred amount. For all other loans, provide the actual ending balance. (20) Scheduled ending balance—total debt owed. For a loan with principal forbearance, provide the sum of the scheduled ending balance field plus the deferred amount. For all other loans, provide the scheduled ending balance. (21) Information related to ARM loan modifications. If the loan was an ARM before and after the most recent modification, provide the following additional information: (i) Post-modification ARM indicator. Indicate whether the loan's existing ARM parameters have changed per the modification agreement. (ii) Post-modification ARM index. Specify the code that describes the index on which an adjustable interest rate is based as of the modification effective payment date. (iii) Post-modification margin. Provide the margin as of the modification effective payment date. The margin is the number of percentage points added to the index to establish the new rate. (iv) Post-modification interest reset period (if changed). Provide the number of months of the interest reset period of the loan as of the modification effective payment date. (v) Post-modification next reset date. Provide the next interest reset date as of the modification effective payment date. (vi) Post-modification index lookback. Provide the number of days prior to an interest rate effective date used to determine the appropriate index rate as of the modification effective payment date. (vii) Post-modification ARM round indicator. Indicate the code that describes whether an adjusted interest rate is rounded to the next higher adjustable rate mortgage round factor, to the next lower round factor, or to the nearest round factor as of the modification effective payment date. (viii) Post-modification ARM round percentage. Indicate the percentage to which an adjusted interest rate is to be rounded as of the modification effective payment date. (ix) Post-modification initial minimum payment. Provide the amount of the initial minimum payment the obligor is permitted to make as of the modification effective payment date. (x) Post-modification next payment adjustment date. Provide the due date on which the next payment adjustment is scheduled to occur for an ARM loan per the modification agreement. (xi) Post-modification ARM payment recast frequency. Provide the payment recast frequency of the loan (in months) per the modification agreement. (xii) Post-modification lifetime rate floor. Provide the minimum rate of interest that may be applied to an adjustable rate loan over the course of the loan's life as of the modification effective payment date. (xiii) Post-modification lifetime rate ceiling. Provide the maximum rate of interest that may be applied to an adjustable rate loan over the course of the loan's life as of the modification effective payment date. (xiv) Post-modification initial interest rate increase. Indicate the maximum percentage by which the interest rate may increase at the first interest rate adjustment date after the loan modification. (xv) Post-modification initial interest rate decrease. Provide the maximum percentage by which the interest rate may adjust downward on the first interest rate adjustment date after the loan modification. (xvi) Post-modification subsequent interest rate increase. Provide the maximum number of percentage points by which the rate may increase at each rate adjustment date after the initial rate adjustment as of the modification effective payment date. (xvii) Post-modification subsequent interest rate decrease. Provide the maximum number of percentage points by which the interest rate may decrease at each rate adjustment date after the initial adjustment as of the modification effective payment date. (xviii) Post-modification payment cap. Provide the percentage value by which a payment may increase or decrease in one period as of the modification effective payment date. (xix) Post-modification payment method after recast. Specify the code that describes the means of computing the lowest monthly payment available to the obligor after recast as of the modification effective payment date. (xx) Post-modification ARM interest rate teaser period. Provide the duration in months that the teaser interest rate is in effect as of the modification effective payment date. (xxi) Post-modification payment teaser period. Provide the duration in months that the teaser payment is in effect as of the modification effective payment date. (xxii) Post-modification ARM negative amortization indicator. Indicate yes or no whether a negative amortization feature is part of the loan as of the modification effective payment date. (xxiii) Post-modification ARM negative amortization cap. Provide the maximum percentage of negative amortization allowed on the loan as of the modification effective payment date. (22) Information related to loan modifications involving interest-only periods. If the loan terms for the most recent loan modification include an interest only period, provide the following additional information: (i) Post-modification interest-only term. Provide the number of months of the interest-only period from the modification effective payment date. (ii) Post-modification interest-only last payment date. Provide the date of the last interest-only payment as of the modification effective payment date. (23) Post-modification balloon payment amount. Provide the new balloon payment amount due at maturity as a result of the loan modification, not including deferred amounts. (24) Information related to step loans. If the loans terms for the most recent loan modification agreement call for the interest rate to step up over time, provide the following additional information: (i) Post-modification interest rate step indicator. Indicate whether the terms of the modification agreement call for the interest rate to step up over time. (ii) Post-modification step interest rate. Provide the rate(s) that will apply at each change date as stated in the loan modification agreement. All rates must be provided, not just the first change rate, unless there is only a single change date. (iii) Post-modification step date. Provide the date(s) at which the next rate and/or payment change will occur per the loan modification agreement. All dates must be provided, not just the first change, unless there is only a single change date. (iv) Post-modification—step principal and interest. Provide the principal and interest payment(s) that will apply at each change date as stated in the loan modification agreement. All payments must be provided, not just the first change payment, unless there is only a single change date. (v) Post-modification—number of steps. Provide the total number of step rate adjustments under the step agreement. (vi) Post-modification maximum future rate under step agreement. Provide the maximum interest rate to which the loan will step up. (vii) Post-modification date of maximum rate under step agreement. Provide the date on which the maximum interest rate will be reached. (25) Non-interest bearing principal deferred amount (cumulative). Provide the total amount of principal deferred (or forborne) by the modification that is not subject to interest accrual. (26) Non-interest bearing principal deferred amount (reporting period). Provide the total amount of principal deferred by the modification that is not subject to interest accrual. (27) Recovery of deferred principal (reporting period). Provide the amount of deferred principal collected from the obligor during the reporting period. (28) Non-interest bearing deferred paid-in-full amount. If the loan had a principal forbearance and was paid in full or liquidated, provide the amount paid towards the amount of the principal forbearance. (29) Non-interest bearing deferred interest and fees amount (reporting period). Provide the total amount of interest and expenses deferred by the modification that is not subject to interest accrual during the reporting period. (30) Non-interest bearing deferred interest and fees amount (cumulative). Provide the total amount of interest and expenses deferred by the modification that is not subject to interest accrual. (31) Recovery of deferred interest and fees (reporting period). Provide the amount of deferred interest and fees collected during the reporting period. (n) Information related to forbearance or trial modification. If the type of loss mitigation is forbearance or a trial modification, provide the following additional information. A forbearance plan refers to a period during which either no payment or a payment amount less than the contractual obligation is required from the obligor. A trial modification refers to a temporary loan modification during which an obligor's application for a permanent loan modification is under evaluation. (1) Most recent forbearance plan or trial modification start date. Provide the date on which a payment change pursuant to the most recent forbearance plan or trial modification started. (2) Most recent forbearance plan or trial modification scheduled end date. Provide the date on which a payment change pursuant to the most recent forbearance plan or trial modification is scheduled to end. (3) Most recent trial modification violated date. Provide the date on which the obligor ceased complying with the terms of the most recent trial modification. (o) Information related to repayment plan. If the type of loss mitigation is a repayment plan, provide the following additional information. A repayment plan refers to a period during which an obligor has agreed to make monthly mortgage payments greater than the contractual installment in an effort to bring a delinquent loan current. (1) Most recent repayment plan start date. Provide the date on which the most recent repayment plan started. (2) Most recent repayment plan scheduled end date. Provide the date on which the most recent repayment plan is scheduled to end. (3) Most recent repayment plan violated date. Provide the date on which the obligor ceased complying with the terms of the most recent repayment plan. (p) Information related to short sales. Short sale refers to the process in which a servicer workers with a delinquent obligor to sell the property prior to the foreclosure sale. If the type of loss mitigation is short sale, provide the following information: (1) Short sale accepted offer amount. Provide the amount accepted for a pending short sale. (2) [Reserved] (q) Information related to loss mitigation exit. If the loan has exited loss mitigation efforts during the reporting period, provide the following additional information: (1) Most recent loss mitigation exit date. Provide the date on which the servicer deemed the most recent loss mitigation effort to have ended. (2) Most recent loss mitigation exit code. Indicate the code that describes the reason the most recent loss mitigation effort ended. (r) Information related to loans in the foreclosure process. If the loan is in foreclosure, provide the following additional information: (1) Attorney referral date. Provide the date on which the loan was referred to a foreclosure attorney. (2) Foreclosure delay reason. Indicate the code that describes the reason for delay within the foreclosure process. (3) Foreclosure exit date. If the loan exited foreclosure during the reporting period, provide the date on which the loan exited foreclosure. (4) Foreclosure exit reason. If the loan exited foreclosure during the reporting period, indicate the code that describes the reason the foreclosure proceeding ended. (5) NOI Date. If a notice of intent (NOI) has been sent, provide the date on which the servicer sent the NOI correspondence to the obligor informing the obligor of the acceleration of the loan and pending initiation of foreclosure action. (s) Information related to REO. REO (Real Estate Owned) refers to property owned by a lender after an unsuccessful sale at a foreclosure auction. If the loan is REO, provide the following additional information: (1) Most recent accepted REO offer amount. If an REO offer has been accepted, provide the amount accepted for the REO sale. (2) Most recent accepted REO offer date. If an REO offer has been accepted, provide the date on which the REO sale amount was accepted. (3) Gross liquidation proceeds. If the REO sale has closed, provide the gross amount due to the issuing entity as reported on Line 420 of the HUD-1 settlement statement. (4) Net sales proceeds. If the REO sale has closed, provide the net proceeds received from the escrow closing (before servicer reimbursement). (5) Reporting period loss amount passed to issuing entity. Provide the cumulative loss amount passed through to the issuing entity during the reporting period, including subsequent loss adjustments and any forgiven principal as a result of a modification that was passed through to the issuing entity. (6) Cumulative total loss amount passed to issuing entity. Provide the loss amount passed through to the issuing entity to date, including any forgiven principal as a result of a modification that was passed through to the issuing entity. (7) Subsequent recovery amount. Provide the reporting period amount recovered subsequent to the initial gain/loss recognized at the time of liquidation. (8) Eviction indicator. Indicate whether an eviction process has begun. (9) REO exit date. If the loan exited REO during the reporting period, provide the date on which the loan exited REO status. (10) REO exit reason. If the loan exited REO during the reporting period, indicate the code that describes the reason the loan exited REO status. (t) Information related to losses. (1) Information related to loss claims. (i) UPB at liquidation. Provide the actual unpaid principal balance (UPB) at the time of liquidation. (ii) Servicing fees claimed. Provide the amount of accrued servicing fees claimed at time of servicer reimbursement after liquidation. (iii) Servicer advanced amounts reimbursed—principal. Provide the total amount of unpaid principal advances made by the servicer that were reimbursed to the servicer. (iv) Servicer advanced amounts reimbursed—interest. Provide the total amount of unpaid interest advances made by the servicer that were reimbursed to the servicer. (v) Servicer advanced amount reimbursed—taxes and insurance. Provide the total amount of any unpaid escrow amounts advanced by the servicer that were reimbursed to the servicer. (vi) Servicer advanced amount reimbursed—corporate. Provide the total amount of any outstanding advances of property inspection and preservation expenses made by the servicer that were reimbursed to the servicer. (vii) REO management fees. If the loan is in REO, provide the total amount of REO management fees (including auction fees) paid over the life of the loan. (viii) Cash for keys/cash for deed. Provide the total amount paid to the obligor or tenants in exchange for vacating the property, or the payment to the obligor to accelerate a deed-in-lieu process or complete a redemption period. (ix) Performance incentive fees. Provide the total amount paid to the servicer in exchange for carrying out a deed-in-lieu or short sale or similar activities. (2) [Reserved] (u) Information related to mortgage insurance claims. If a mortgage insurance claim (MI claim) has been submitted to the primary mortgage insurance company for reimbursement, provide the following additional information: (1) MI claim filed date. Provide the date on which the servicer filed an MI claim. (2) MI claim amount. Provide the amount of the MI claim filed by the servicer. (3) MI claim paid date. If the MI claim has been paid, provide the date on which the MI company paid the MI claim. (4) MI claim paid amount. If the MI claim has been decided, provide the amount of the claim paid by the MI company. (5) MI claim denied/rescinded date. If the MI claim has been denied or rescinded, provide the final MI denial date after all servicer appeals. (6) Marketable title transferred date. If the deed for the property has been conveyed to the MI company, provide the date of actual title conveyance to the MI company. (v) Information related to delinquent loans. (1) Non-pay status. Indicate the code that describes the delinquency status of the loan. (2) Reporting action code. Further indicate the code that defines the default/delinquent status of the loan. Item 2. Commercial mortgages. If the asset pool includes commercial mortgages, provide the following data for each loan in the asset pool: (a) Asset numbers. (1) Asset number type. Identify the source of the a…

    Related guides, FAQ and contract templates