Beta
14 CFR § 29.175
14 CFR § 29.175 — § 29.175 Demonstration of static longitudinal stability.
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AI§ 29.175 Demonstration of static longitudinal stability.
(a) Climb. Static longitudinal stability must be shown in the climb condition at speeds from Vy − 10 kt to Vy + 10 kt with—
(1) Critical weight;
(2) Critical center of gravity;
(3) Maximum continuous power;
(4) The landing gear retracted; and
(5) The rotorcraft trimmed at Vy.
(b) Cruise. Static longitudinal stability must be shown in the cruise condition at speeds from 0.8 V NE −10 kt to 0.8 V NE + 10 kt or, if V H is less than 0.8 V NE , from VH − 10 kt to V H + 10 kt, with—
(1) Critical weight;
(2) Critical center of gravity;
(3) Power for level flight at 0.8 V NE or V H , whichever is less;
(4) The landing gear retracted; and
(5) The rotorcraft trimmed at 0.8 V NE or V H , whichever is less.
(c) V NE . Static longitudinal stability must be shown at speeds from V NE − 20 kt to V NE with—
(1) Critical weight;
(2) Critical center of gravity;
(3) Power required for level flight at V NE − 10 kt or maximum continuous power, whichever is less;
(4) The landing gear retracted; and
(5) The rotorcraft trimmed at V NE − 10 kt.
(d) Autorotation. Static longitudinal stability must be shown in autorotation at—
(1) Airspeeds from the minimum rate of descent airspeed − 10 kt to the minimum rate of descent airspeed + 10 kt, with—
(i) Critical weight;
(ii) Critical center of gravity;
(iii) The landing gear extended; and
(iv) The rotorcraft trimmed at the minimum rate of descent airspeed.
(2) Airspeeds from the best angle-of-glide airspeed − 10kt to the best angle-of-glide airspeed + 10kt, with—
(i) Critical weight;
(ii) Critical center of gravity;
(iii) The landing gear retracted; and
(iv) The rotorcraft trimmed at the best angle-of-glide airspeed.
[Amdt. 29-51, 73 FR 11001, Feb. 29, 2008]
