Beta
pk:federal:UY2FqaJw1-apaUY2Fqa-apaUY2FobJ8%3D
pk:federal:UY2FqaJw1-apaUY2Fqa-apaUY2FobJ8%3D — Registered Layout-Designs of Integrated Circuits Ordinance, 2000
Beta. Legal information, not legal advice. LEGALDIGM is not a law firm. Check the official source for the current text.
Analyze this law with AITHE REGISTERED LAYOUT-DESIGNS OF INTEGRATED
CIRCUITS ORDINANCE, 2000
CONTENTS
1.
Short title, extent and commencement
2.
Definitions
3.
Originality
4.
Right to protections
5.
Effect of protection
6.
Commencement and duration of protection
7.
Application for registration
8.
Registration
9.
Register of Layout-Designs
10.
Right to transfer and subsequent rectification of Register of Layout-Designs
11.
Change in the ownership of a protected layout-design
12.
Contractual licences
13.
Cancellation
14.
Representation
15.
Infringement and enforcement of right
16.
Offences and penalties
17.
Exploitation by a Government agency or third person
18.
Exercise of discretionary power and extension of time
19.
Appeal
20.
Surrender of right
21.
Power to make rules
22.
Power to make regulations
THE REGISTERED LAYOUT-DESIGNS OF INTEGRATED CIRCUITS
ORDINANCE, 2000
ORDINANCE No. XLIX of 2000
[12th September, 2000]
An Ordinance to provide for the registration of layout-designs of integrated circuits
WHEREAS Pakistan is a signatory to the Agreement for the Establishment of the World Trade
Organization and the Agreement on Trade Related Aspects of Intellectual Property Rights for the
purpose of reduction of distortions and impediments to international trade and for effective and
adequate protection of intellectual property rights, and with a view to meet obligations of Pakistan
under the aforesaid Agreements and to promote technological developments in the country, it is
expedient to provide for promotion of the development of semiconductor integrated circuits by
establishing a system for legal protection of registered layout-designs of integrated circuits, and for
matters ancillary thereto or connected therewith;
AND WHEREAS, the National Assembly and the Senate stand suspended in pursuance of the
Proclamation of the fourteenth day of October, 1999, and the Provisional Constitution Order No. 1 of
1999;
AND WHEREAS, the President is satisfied that circumstances exist which render it necessary
to take immediate action;
NOW, THEREFORE, in pursuance of the Proclamation of Emergency of the fourteenth day of
October, 1999, and Provisional Constitution Order No. 1 of 1999, as well as Order No. 9 of 1999, and
in exercise of all powers enabling him in that behalf, the President of the Islamic Republic of Pakistan
is pleased to make and promulgate the following Ordinance :—
1. Short title, extent and commencement:___ (1) This Ordinance may be called the Registered
Layout-Designs of integrated Circuits Ordinance, 2000.
(2)
It extends to the whole of Pakistan.
(3)
It shall come into force at once.
2. Definitions :___In this Ordinance, unless there is anything repugnant in the subject or
context,—
(a)
“Controller” means the Controller of Patents appointed under the Patents
Ordinance, 2000;
(b)
“District Court” has the meanings assigned to that expression by the Code of
Civil Procedure, 1908 (Act V of 1908).
(c)
“integrated circuit” means a product, in its final form or an intermediate form,
in which the elements, at least one of which is an active element, and some or
all of the interconnections are integrally formed in or on a piece of material
which is intended to perform an electronic function;
(d)
“layout-design” means a three dimensional disposition, howsoever expressed,
of the elements, at least one of which is an active element and of some or all of
the interconnection of an integrated circuit or such a three dimensional
disposition prepared for an integrated circuit intended for manufacture;
(e)
“Patent Office” means the Patent Office established under the Patents
Ordinance, 2000;
(f)
“prescribed” means prescribed by rules made under this Ordinance;
(g)
“protection” means the right to layout-design protection as provided under
section 4;
(h)
“registration” means registration under section 8;
(i)
“right-holder” means the natural person who, or legal entity which, shall be the
beneficiary of the protection referred to in section 4; and
(j)
“regulations” means regulations made under this Ordinance.
3. Originality :___ (1) A layout-design shall be considered to be original if it is the result of its
creator's own intellectual effort and is not commonplace among creators and manufacturers of layoutdesigns of integrated circuits at the time of its creation.
(2) A layout-design consisting of a combination of elements and inter-connections that are
commonplace shall be considered to be original if the combination taken as a whole fulfils the
conditions specified in sub-section (1).
4. Right to protection:___ (1) The right to layout design protection shall be available under this
Ordinance if and to the extent, the layout-design is original within the meaning of section 3 and has
been subject of application for registration.
(2) The right to layout-design protection shall belong to the creator of the layout-design.
Where several persons have jointly created a layout-design, then such right shall belong to them jointly.
(3) Where the layout-design has been created in execution of commission or an employment
contract, the right to layout design protection shall belong, in the absence of contractual provisions to
the contrary, to the person who commissioned the work or to the employee.
(4) The right to layout-design protection shall be assignable or transferable by succession.
(5) The right to layout-design protection shall not depend upon whether or not the integrated
circuit which incorporates the registered layout-design is itself incorporated in an article.
5. Effect of protection:___(1) Subject to section 17, the protection shall have the effect that the
following acts shall be unlawful if performed without the authorization of the right-holder, namely:—
(i)
reproducing, whether by incorporation in an integrated circuit or otherwise, the
registered layout-design in its entirety or any part thereof, except the act of
reproducing any part that does not comply with the requirement of originality
referred to in section 3; and
(ii)
importing, selling or otherwise distributing for commercial purpose the
registered layout-design, or an integrated circuit in which the registered layoutdesign is incorporated or an article incorporating such an integrated circuit in so
far as it continues to contain an unlawfully reproduced layout-design.
(2) The following acts shall not require the authorization of the right holder, namely:—
(i)
reproduction of the registered layout-designs for private purposes or for the sole
purpose of evaluation, analysis, research or teaching
(ii)
the incorporation in an integrated circuit of a layout-design created on the basis
of such analysis or evaluation and which is itself original under section 3 or the
performance of any of the acts referred to in sub-section (1) in respect of that
layout-design;
(iii)
the performance of any of the acts referred to in clause (ii) of sub-section (1)
where the act is performed in respect of a registered layout-design, or in respect
of an integrated circuit in which such a layout design is incorporated, that has
been put on the market by or with the consent of, the right holder;
(iv)
the performance of any of the acts referred to in clause (ii) of sub-section (1) in
respect of an integrated circuit incorporating an unlawfully reproduced layoutdesign or any article incorporating such an integrated circuit where the person
performing or ordering such an act did not know, when acquiring the integrated
circuit or the article incorporating such an integrated circuit, that it incorporated
an unlawfully reproduced layout-design. However, after the time that such
person has received sufficient notice that the layout-design was unlawfully
reproduced that person may perform any of the said acts only with respect to
the stock on hand, or ordered before such time, and shall be liable to pay to the
right holder a sum equivalent to a reasonable royalty such as would be payable
under a freely negotiated licence in respect of such a layout-design; or
(v)
the performance of any of the acts referred to in clause (ii) of sub-section (1)
where the act is performed in respect of an identical layout-design which is
original and has been created independently by a third party.
6. Commencement and duration of protection:___The protection of a layout-design
registered under this Ordinance shall commence on the date of the first commercial exploitation
anywhere in the world and shall terminate at the end of the tenth calendar year from the date of such
first commercial exploitation.
7. Application for registration:___ (1) An application for the registration of a layout design
shall be in writing and shall be filed with the Patent Office. A separate application shall be filed for
each layout-design.
(2) An application for the registration of a layout-design may either be filed only if a layoutdesign has not been commercially exploited or has been commercially exploited for not more than two
years.
(3) An application submitted under sub-section (1) shall—
(i)
contain a request for registration of the layout-design in the Register of
Layout-Designs and a brief an precise designation thereof;
(ii)
indicate the name, address, nationality and, if different from the address,
the habitual residence of the applicant;
(iii)
be accompanied by—
(a)
the power of attorney, appointing the representative of the applicant, if any;
(b)
a copy or drawing of the layout-design and a sample of the integrated circuit
alongwith information defining the electronic function which the integrated
circuit is intended to perform, however, the applicant may omit such parts of the
copy or drawing related to the manner of manufacture of the integrated circuit,
provided that the parts submitted are sufficient to allow the identification of the
layout-design; and
(c)
payment of the prescribed fee to the Patent Office;
(iv)
specify the date of first commercial exploitation of the layout-design
somewhere in the world; and
(v)
provide particulars establishing the right to layout-design protection
under section 4.
(4) Where the application does not duly comply with the requirements of sub-section (3), the
Controller shall inform the applicant about the defects and ask him to make necessary corrections
within the prescribed time-limit.
(5) The Controller shall accord as the filing date to be the date of receipt of the complete
application in accordance with the requirements of sub-section (3).
(6) The Controller shall confirm the filing date and communicate it to the applicant.
(7) If the defects are not corrected within the time-limit referred to in sub-section (4), the
application shall be deemed not to have been filed.
8. Registration:___ (1) The Controller shall, where the application complies with the
requirement of section 7, after such enquiry as he thinks fit, register the layout-design in the Register
of Layout-Designs.
(2) The registration of a layout-design shall be published in the official Gazette.
9. Register of Layout-Designs:___ (1) The Patent Office shall maintain a register to be called
the “Register of Layout-Designs” in which it shall, for each registered layout-design, effect all the
recordings provided for in this Ordinance.
(2) The Register of Layout-Designs shall contain the number, title, filing date and the date of
first commercial exploitation of the layout-design as well as the name and address of the right holder
and other particulars as may be prescribed.
(3) Any person may consult the Register of Layout Designs and obtain extracts therefrom,
on payment of the prescribed fee.
10. Right to transfer and subsequent rectification of Register of Layout-Designs:___ (1)
Where the essential contents of an application have been taken from the layout-design of another
person without his consent, such person may, in writing, request the Controller to transfer the
application to him.
(2) Where the application has already resulted in a registration, that person may, within three
years from the publication of the registration, in writing, request the Controller to transfer the
registration to him and to rectify the entry in the Register of Layout-designs accordingly.
(3) The Controller shall send forthwith a copy of such a request to the right-holder, and, within
the prescribed period and in the prescribed manner, such right-holder may send to the Controller a
counter-statement of the grounds on which he relies.
(4) If the right-holder sends a counter-statement, the Controller shall furnish a copy thereof to
the person requesting the transfer and, after hearing the parties, if either or both wish to be heard, and
considering the merits of the case, shall decide whether the application or registration should be
transferred and, where applicable, whether the Register of Layout-Designs should be rectified
11. Change in the ownership of a protected layout-design:___(1) Any change in the
ownership of a protected layout-design shall be in writing.
(2) Once the layout-design has been registered the change in ownership at the request of any
interested party, made to the Patent Office, shall be recorded and published by the Controller. Such
change shall have no effect against third parties until such recording is effected.
(3) An application for change in ownership shall be accompanied by such fee as may be
prescribed.
12. Contractual licences:___ (1) Any licence contract concerning a registered layout-design
shall be submitted to the Patent Office which shall keep its contents confidential but shall publish a
reference thereto.
(2) The licence contract shall have no effect against third parties until such submission as
referred to in sub-section (1) has been made.
13. Cancellation.—(1) Any interested person may apply for cancellation of registration of a
layout-design on the grounds that:—
(i)
the layout-design is not protectable under sections 3 and 4;
(ii)
the right holder is not entitled to protection under section 4; or
(iii)
the layout-design has not been commercially exploited anywhere in the
world before the filing of the application for registration.
(2) Where the grounds for cancellation are established with respect only to a part of the layoutdesign, only the corresponding part of the registration shall be cancelled.
(3) An application for cancellation of the registration of the layout-design under sub-sections
(1) and (2) shall be filed with the District Court in writing. The request shall state the grounds on which
it is based.
(4) Any cancelled layout-design registration, or part thereof, shall be regarded as null and void
from the date of the commencement of protection.
(5) The final decision of the District Court shall be communicated to the Controller who shall
record it and publish a reference thereto as soon as possible.
14. Representation:___Where an applicant's ordinary residence or principal place of business
is outside Pakistan he shall be represented by a legal practitioner resident and practicing in Pakistan.
15. Infringement and enforcement of right:___ (1) Infringement shall consist of the
performance of any act which is unlawful under section 5.
(2) On the request of the right holder, or of his licensee if the latter has requested the right
holder to institute court proceedings for a specific relief and the right holder has refused or failed to do
so within a reasonable period, the District Court may grant an injunction to prevent infringement or an
imminent infringement and award damages and grant any other remedy provided for in the relevant
law in force.
(3) An action under sub-section (2) may be initiated only after a layout-design has been
registered under section 8.
16. Offences and penalties:___ (1) Any person who, without authorization knowingly performs
any act which is unlawful under section 5 shall be guilty of an offence punishable with imprisonment
for a term which may extend to two years, or with fine which shall not be less than two hundred
thousand rupees, or with both.
(2) The Court may also order the seizure, forfeiture and destruction of the layout-designs of
integrated circuits or article; and of any materials or implements having been predominantly used in
the commission of the offence.
17. Exploitation by a Government agency or third person:___ (1) Subject to sub-section (2),
where—
(i)
the public interest, in particular, national security, nutrition, health or the
development of other vital sectors of the national economy requires the
exploitation of a registered layout-design for public non-commercial use; or
(ii)
a judicial or administrative body has determined that the manner of exploitation
of a registered layout-design, by the right-holder, or his licensee, is
anticompetitive, and the Federal Government is satisfied that exploitation of the
layout-design in accordance with the provisions of this section would remedy
such practice,
the Federal Government may, even without the consent of the right holder, decide that a Government
agency or a third person designated by the Federal Government may exploit the layout-design.
(2) The Federal Government shall, before taking any decision under sub-section (1), give the
right-holder and any interested person an opportunity of being heard if he wishes to be heard.
(3) The exploitation of a layout-design shall be limited to the purpose for which it was
authorized under sub-section (1), and shall be subject to the payment to the right-holder of an adequate
remuneration therefore taking into account the economic value of the said authorization as the Federal
Government may determine.
(4) Upon request of the right-holder, or of the beneficiary of the authorization under subsection (1), the Federal Government may after hearing the parties, if either or both wish to be heard,
vary the terms of the decision authorizing the exploitation of the layout-design to the extent that
changed circumstances justify such variation.
(5) Upon the request of the right-holder, the Federal Government shall terminate the
authorization if it is satisfied that the circumstances which led to the decision have ceased to exist and
are unlikely to recur or that the beneficiary of the authorization under sub-section (1) has failed to
comply with the terms of such authorization.
(6) Notwithstanding the provisions of sub-section (5), the Federal Government shall not
terminate an authorization if it is satisfied that the adequate protection of the legitimate interests of the
beneficiary of the authorization justifies the maintenance of such authorization.
(7) Where a third person has been designated by the Federal Government, the authorization
may only be transferred with the enterprise or business of the beneficiary of authorization or with the
part of the enterprise or business within which the layout-design is being exploited.
(8) A request for grant of authorization under sub-section (1) shall be accompanied by evidence
that the right-holder has received, from the person seeking the authorization, a request for a contractual
licence but that person has been unable to obtain such licence on reasonable commercial terms and
conditions and within a reasonable time:
Provided that this sub-section shall not apply in cases of—
(i)
national emergency or other circumstantial urgency provided that in
such cases the owner of the patent shall be informed of decision of the
Federal Government as soon as reasonably practicable;
(ii)
public non-commercial use; and
(iii)
anti-competitive practices determined as such by a judicial or
administrative body in accordance with clause (ii) of sub-section (1).
18. Exercise of discretionary power and extension of time:___ (1) The Controller shall give
any party to any proceeding before him an opportunity of being heard before exercising any
discretionary power under the provisions of this Ordinance which may adversely affect such party.
(2) The Controller may, if he is satisfied that the circumstances justify it, upon receiving a
written request therefor, extend the time for doing any act or taking any proceeding under this
Ordinance, upon notice to the parties concerned and upon such terms as he may direct.
19. Appeal:___ (1) An appeal shall lie to the High Court in cases of dispute relating to the
application of this Ordinance and in matters which under this Ordinance are required to be referred to
a District Court.
(2) An appeal shall lie to the High Court against the decision of the Federal Government under
section 17.
(3) An appeal shall lie to the High Court against any decision taken by the Controller under
this Ordinance in particular the registration of a layout-design, by any interested party and such appeal
shall be referred within two months of the date of such decision.
20. Surrender of right:___ (1) The right-holder may surrender his right to protection only with
the approval of the sole use grantee, or ordinary use grantee and pledgee, if any.
(2) A sole use grantee may surrender his sole use right to protection only with the approval
of the ordinary use grantee and pledgee, if any.
(3) An ordinary use grantee may surrender his ordinary use right to protection only with the
approval of the pledgee, if any.
21. Power to make rules:___ (1) The Federal Government may, by notification in the official
Gazette, make rules for carrying out the purposes of this Ordinance.
(2) In particular and without prejudice to the generality of the foregoing power, such
regulations may provide for—
(a)
payment of fee in connection with an application for registration of layoutdesign of' integrated circuit and matters related thereto; and
(b)
fee to be paid to the Patent Office for obtaining copies of the relevant record of
the registered layout-design of integrated circuit from the Patent Office.
22. Power to make regulations:___The Controller may, with the approval of Federal
Government, make regulations, not inconsistent with the rules, for carrying out the purposes of this
Ordinance.
