IPA design sub-class-25-01 — IP Australia Designs Examiners' Manual – Sub-class 25-01

BUILDING MATERIALS NOTE: Including bricks, beams, pre-shaped strips, tiles, slates and panels. Not including drainpipes for walls. 25-01 A Bricks and blocks including paving blocks, refactory bricks and fire bricks. Including blocks for breakwaters. (not including garden edging, kerbstones and tree surrounds (class 25-01E)). B Concrete reinforcing rods, plates, bar chairs and supports. C Structural building members including beams, girders, studs and channels. (not including extrusions and sections of indefinite length (class 25-01K/Z)). D Building panels, acoustic tiles and boards. (not including door panels or wrought iron panels ( class 25-02 )). E Fence posts, droppers, pickets and post caps. Garden and driveway edging. Tree surrounds, kerbstones and similar boundary markers. Railway rails and sleepers. (not including electric fences ( class 13-02 )). F Tiles and slates for roofs, walls and floors. (not including parquetry ( class 25-02Z ). G Exterior cladding including roof iron, fascia, gable and ridge panels, weatherboards, barge boards and moulds. H Reinforced and decorative glass for buildings. K Extrusions or complex sections. Composite extrusions i.e. those comprising two or more components. Hollow section extrusions i.e. those having any parts completely hollow. Other extrusions i.e. those not included in 25-01K(A) or 25-01K(B). (not including weather seals ( class 25-99 )). Z Building materials not elsewhere specified including simple folded sections, i.e. those not extruded (class 25-01K).